机器视觉论坛微信公众号:石鑫华视觉网

 找回密码
 注册会员
查看: 110|回复: 0

[LV工具模块] LabVIEW 2021 Sound and Vibration Toolkit Win64ENG LabVIEW声音和振动工具包NISV2021-64

[复制链接]
  • TA的每日心情
    奋斗
    11 小时前
  • 签到天数: 2554 天

    连续签到: 6 天

    [LV.Master]2000FPS

    发表于 2022-4-26 11:01:30 | 显示全部楼层 |阅读模式

    注册登陆后可查看附件和大图,以及购买相关内容

    您需要 登录 才可以下载或查看,没有账号?注册会员

    x
    Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件、模块、工具包、驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Activator来激活,以下链接可下载:
    NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
    http://pcmv.cn/thread-490-1-1.html

    视觉论坛的各种资源,除了视觉相关的模块有使用外,大部分的都不会使用,所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址,那视觉论坛也没有办法,只能尝试使用百度网盘地址下载;如果百度网盘的下载地址失效过期,可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好,有些时候速度很慢或大的资源下载很容易出错,这样会造成安装过程各种类型报错而无法安装。建议在下载完成后,对下载资源做校验和验证(NI一般会提供MD5或SHA256等),与官方或视觉论坛提供的校验和对比,一致就可以安装,如果不一致,则需要重新下载。视觉论坛早期下载的资源,那时候NI没有这么多限制,基本上都是正常下载的资源;后期下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘,所以百度网盘的资源基本上是正确的。校验和工具下载地址:
    文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
    http://pcmv.cn/thread-26524-1-1.html

    LabVIEW 2021 Sound and Vibration Toolkit Win64ENG LabVIEW声音和振动工具包NISV2021-64

    LabVIEW声音和振动工具包提供了音频测试、声学测量和振动测量应用所需的函数和显示控件。
    LabVIEW声音和振动工具包是一个软件附加组件,包含易于使用的功率谱、正弦扫频和倍频程分析VI。它还可进行音频和失真测量、频率分析、频率响应测量和瞬态分析。该工具包还对分析解决方案进行了更新,以符合不断发展的IEC标准。LabVIEW声音和振动工具包提供了50多个可立即运行的LabVIEW示例,旨在帮助用户快速开始开发应用程序。

    SV工具包,在2019及之后版本,使用32位、64位分开安装文件的方式,在2018及之前的版本则使用同一个安装文件,即同一安装文件可支持32位、64位LabVIEW,与VISION模块类似。具体的请查看下面的自述文件。

    SV2016版的安装包比SV2015版的安装小了近1GB,从自述文件中看到,主要是少了SV快速VI和SVA的助手工具,如果要安装SV快速VI和SVA助手,则需要使用2015及以前的版本:
    Note: Sound and Vibration Express VIs and the Sound and Vibration Assistant are not instalLED by NI Sound and Vibration Measurement Suite 2016. Side-by-side installation is supported; therefore you may install the Sound and Vibration Assistant from NI Sound and Vibration Toolkit or NI Sound and Vibration Measurement Suite 2015 or earlier.

    LabVIEW 2021声音和振动工具包
    发布日期
    2022/1/27
    包含的版本
    2021
    受支持的操作系统
    Windows 10 64-bit
    Windows Server 2016 64-bit
    Windows Server 2019 64-bit
    语言
    English
    程序位数
    64位
    校验和
    文件大小: 942356480 字节 (898.70 MB)
    修改日期: 2022-01-28 07:01
    MD5: b807d8b2a3150a2c09203e453a606967
    SHA1: 010919e5293a85f39c64aae8dc90d4d7c872e6ee
    SHA256: e4c9d77ae18f996504daf8138d0e6eb4718731a17a0ebbc2a3ee9f12bae5279b
    CRC32: ca3a71ee

    百度网盘下载和NI官方下载地址:
    请注册登陆视觉论坛会员,购买附件查看
    SV2021x64.txt (573 Bytes, 下载次数: 0, 售价: 10 快钱)

    LabVIEW 2021 Sound and Vibration Toolkit Readme
    January 2022
    This file contains installation instructions and compatibility information for LabVIEW Sound and Vibration Toolkit 21.5.
    You can find more release information on ni.com.
    • LabVIEW Sound and Vibration Toolkit Release Notes: Known issues, bugs fixed since the last release, and other notes about this release
    • LabVIEW Sound and Vibration Toolkit Manuals: New features, behavior changes, and other documentation
    Overview
    Supported Operating Systems
    System Requirements
    Application Software Support
    Installation Instructions
    Product Security and Critical Updates
    New Features
    Redistributing Executable Sound and Vibration Applications
    Accessing the Help
    Accessing the Sample Projects
    Finding Examples
    Automating the Installation of NI Products
    Using NI Software with Microsoft Windows 10
    Legal Information

    Overview
    The LabVIEW Sound and Vibration Toolkit provides comprehensive configuration, measurement-analysis, and visualization tools for audio, noise-vibration-harshness (NVH), and machine condition monitoring (MCM) applications. Based on an open-analysis capability and a flexible measurement library, the Labview Sound and Vibration Toolkit presents a unique capability to create software-defined automated test and measurement applications. Learn more about the sound and vibration software at ni.com/soundandvibration.
    Supported Operating Systems
    LabVIEW Sound and Vibration Toolkit 21.5 for Windows supports the following platforms:
    • Windows 10
    • Windows Server 2019
    • Windows Server 2016
    Note    LabVIEW Sound and Vibration Toolkit no longer supports Windows Vista/XP/7/8.1, Windows Server 2003/2008/2012, or any 32-bit Windows operating system. LabVIEW Sound and Vibration Toolkit 21.5 will not install or run on an unsupported OS. You cannot deploy or distribute applications that use LabVIEW Sound and Vibration Toolkit 21.5 to an unsupported OS. Additionally, after installing LabVIEW Sound and Vibration Toolkit 21.5 on a supported OS computer, you cannot create any installers containing any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio for an unsupported OS computer.
    For detailed information about NI operating system support, visit http://www.ni.com/r/win32bitsupport.
    System Requirements
    LabVIEW Sound and Vibration Toolkit Base/Full have the following requirements:
    • At least 1 GB of available disk space
    • At least 1 GB of RAM
    • NI-DAQmx 21.0 or later installed for NI-DAQmx measurement hardware support
    Refer to the LabVIEW Readme for additional system requirements and supported operating systems for LabVIEW 2021.
    Application Software Support
    The following table lists the NI application software versions, including service packs, supported by LabVIEW Sound and Vibration Toolkit.
    NI Application Software
    Versions Supported by Labview Sound and Vibration Toolkit 2021
    NI LabVIEW (32-bit and 64-bit) Full or Professional Development System2021
    NI LabVIEW Real-Time Module2021
    Note: Sound and Vibration Express VIs and the Sound and Vibration Assistant are not installed by Labview Sound and Vibration Toolkit 2021. Applications written with the previous versions of LabVIEW and the LabVIEW Sound and Vibration Toolkit will continue working.
    Installation Instructions
    NI installs software using NI Package Manager. If you do not already have NI software installed, LabVIEW installs NI Package Manager to handle the installation of your NI software. Visit ni.com/info and enter the Info Code NIPMDownload to download NI Package Manager. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using NI Package Manager.
    Notes
    • If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.
    • Use the serial number that is included with your software to activate LabVIEW Sound and Vibration Toolkit. For more information on software activation, refer to National Instruments Software Activation.
    Installing from the LabVIEW 2021 Platform media
    You can install all of your LabVIEW products—including LabVIEW Sound and Vibration Toolkit—using the LabVIEW Platform media. Refer to the LabVIEW Installation Guide on the LabVIEW Platform media for installation instructions and system requirements.
    To request additional LabVIEW Platform media, refer to the National Instruments website.
    Note If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.
    Product Security and Critical Updates
    Visit ni.com/security to view and subscribe to receive security notifications about National Instruments products. Visit ni.com/critical-updates for information about critical updates from National Instruments.
    New Features
    LabVIEW Sound and Vibration Toolkit includes the following new features:
    • Support for LabVIEW 2021
      • Support for LabVIEW 2021 does not remove previously installed support for LabVIEW 2020 and earlier.
    • Improved memory and speed performance of SV Aures Tonality and SV Aures Roughness VIs
    • Enhanced Sample Projects:
      • Dynamic Signal Generator (DSG) refactored for scalability
      • Audio Analyzer refactored for readability
      • Impact Test refactored for speed performance

    Redistributing Executable Sound and Vibration Applications
    If you want to redistribute executables built with LabVIEW Sound and Vibration Toolkit or any of its components, you must purchase the appropriate NI Sound and Vibration Software Run-Time License. The part number for the NI Sound and Vibration Software Run-Time License is 779875-35. Contact National Instruments to purchase the NI Sound and Vibration Software Run-Time License.
    Accessing the Help
    Refer to the LabVIEW Help, accessible by selecting Help»LabVIEW Help in LabVIEW, for information about the Sound and Vibration VIs. Sound and Vibration Toolkit documentation is located in the LabVIEW Help in the following location: LabVIEW Help»Toolkits»Sound and Vibration Toolkit.
    Accessing the Sample Projects
    To access the sample projects and templates from the New Project dialog, select Sample Projects in the left pane and navigate to the project that best matches your application requirements.
    Finding Examples
    You can find LabVIEW examples for the Sound and Vibration VIs using the NI Example Finder. Select Help»Find Examples to launch the NI Example Finder. On the Browse page, the Sound and Vibration example VIs are located in the Toolkits and Modules»Sound and Vibration and the Toolkits and Modules»Order Analysis folders.
    You also can find LabVIEW examples for the Sound and Vibration VIs in the labview\examples\Sound and Vibration and the labview\examples\Order Analysis directories.
    Automating the Installation of NI Products
    You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.
    For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:
    • For more information about silent installations of individual NI products, refer to Customize and Automate Installation of a Single Installer.
    • For more information about silent installations of NI products in a suite, such as NI Software Platform Bundle, refer to Customize and Automate Installation of a Suited Installer.
    • To determine what version of NI Installers your product contains, refer to Determine Type and Version of My National Instruments Installer.
    Using NI Software with Microsoft Windows 10
    Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.
    Legal Information
    Copyright
    © 2004–2022 National Instruments Corporation. All rights reserved.
    Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
    NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
    End-User License Agreements and Third-Party Legal Notices
    You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
    • Notices are located in the \_Legal Information and directories.
    • EULAs are located in the \Shared\MDF\Legal\license directory.
    • Review \_Legal Information.txt for information on including legal information in installers built with NI products.
    U.S. Government Restricted Rights
    If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
    IVI Foundation Copyright Notice
    Content from the IVI specifications reproduced with permission from the IVI Foundation.
    The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
    Trademarks
    Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
    Patents
    For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
    375332G-01


    回复

    使用道具 举报

    您需要登录后才可以回帖 登录 | 注册会员

    本版积分规则

    LabVIEW HALCON图像处理入门教程
    石鑫华机器视觉与LabVIEW Vision图像处理PDF+视频教程11种全套
    《LabVIEW Vision函数实例详解》教程-NI Vision所有函数使用方法介绍,基于NI VISION2020,兼容VDM2021
    LabVIEW图像处理教程
    机器视觉商城淘宝店铺
    视觉论坛充值赞助方法

    QQ|机器视觉论坛 ( 粤ICP备13000975号 )|网站地图

    GMT+8, 2022-6-25 22:53

    Powered by Discuz! X3.4

    Copyright © 2001-2021, Tencent Cloud.

    快速回复 返回顶部 返回列表