机器视觉论坛微信公众号:石鑫华视觉网

 找回密码
 注册会员
查看: 94|回复: 0

[NI应用软件] NI RFmx Waveform Creator 19.0 Full Win32/64ENG RFmx波形创造器19.0完整版

[复制链接]
  • TA的每日心情
    奋斗
    昨天 11:25
  • 签到天数: 2554 天

    连续签到: 6 天

    [LV.Master]2000FPS

    发表于 2022-4-11 15:21:35 | 显示全部楼层 |阅读模式

    注册登陆后可查看附件和大图,以及购买相关内容

    您需要 登录 才可以下载或查看,没有账号?注册会员

    x
    Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件、模块、工具包、驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Activator来激活,以下链接可下载:
    NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
    http://pcmv.cn/thread-490-1-1.html

    视觉论坛的各种资源,除了视觉相关的模块有使用外,大部分的都不会使用,所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址,那视觉论坛也没有办法,只能尝试使用百度网盘地址下载;如果百度网盘的下载地址失效过期,可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好,有些时候速度很慢或大的资源下载很容易出错,这样会造成安装过程各种类型报错而无法安装。建议在下载完成后,对下载资源做校验和验证(NI一般会提供MD5或SHA256等),与官方或视觉论坛提供的校验和对比,一致就可以安装,如果不一致,则需要重新下载。视觉论坛早期下载的资源,那时候NI没有这么多限制,基本上都是正常下载的资源;后期下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘,所以百度网盘的资源基本上是正确的。校验和工具下载地址:
    文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
    http://pcmv.cn/thread-26524-1-1.html

    NI RFmx Waveform Creator 19.0 Full Win32/64ENG RFmx波形创造器19.0完整版

    RFmx Waveform Creator
    RFmx Waveform Creator可帮您创建、可视化和再现通用型、蜂窝、连接性、物联网(IoT)、航空航天/防卫测试应用程序的波形。
    RFmx Waveform Creator是一款应用软件,您可以用来创建通用的和基于标准的波形,用于设计、验证和生产测试应用。借助这款软件,您可以结合信号发生器以交互方式生成波形,或保存开放的、未锁定的波形文件,用于借助自动仪器进行回放或仿真波形。该软件内置有标准的信号配置;您也可以修改、保存和加载自己的自定义波形参数。此外,在预览时域、频域和功率域的信号特征之前,您可以使用RFmx Waveform Creator来应用信号减损、滤波、波峰因子降低(CFR)等功能。

    发布日期:
    2019/6/27
    包含的版本:
    19.0完整版
    受支持的操作系统:
    Windows Server 2008 R2 64-bit
    Windows 7 (SP1) 64-bit
    Windows 8.1 64-bit
    Windows 10 64-bit
    Windows Server 2012 R2 64-bit
    语言:
    英文
    应用程序位数:
    32/64位
    校验和:
    文件大小: 681158656 字节 (649.60 MB)
    修改日期: 2019-08-07 15:40
    MD5: 1941e653965d09c7495a1478153ba3ed
    SHA1: 56847b08d583962d9e73719353d7e626a2667379
    SHA256: df4954fcbf170dd0f9524dad8df7edd2cedd39e1334957d1482b69626fd42a4b
    CRC32: efbd4475

    百度网盘和NI官方下载地址:
    注册登陆视觉论坛用户,购买附件查看下载地址
    RFmx Waveform Crreator 19.0.txt (580 Bytes, 下载次数: 0, 售价: 10 快钱)

    RFmx Waveform Creator 19.0 Readme
    June 2019
    This file contains important information about RFmx Waveform Creator, including installation instructions, new features, bugs fixes, and known issues.
    Overview
    New Features
    Supported Hardware
    System Requirements
    Supported Operating Systems
    Installation Instructions
    Installed Software
    File Locations
    Executable
    Finding Examples
    Accessing the Documentation
    Product Security and Critical Updates
    Behavior Changes
    Known Issues
    Bug Fixes
    Automating the Installation of NI Products
    Using NI Software with Microsoft Windows 10
    Using NI Software with Microsoft Windows 8.1
    RFmx Waveform Creator Drops Support for Windows 7 (64-Bit) and Windows Server 2008 R2 in 2021
    Legal Information

    Overview
    RFmx Waveform Creator provides a unified interface for creating and generating waveforms for multiple wireless standards. You can create unencrypted, unlocked IQ waveform files for playback on NI PXI RF instrumentation.Supported standards include LTE/LTE-Advanced, W-CDMA/HSPA+, GSM/EDGE+, TD-SCDMA, and more.
    New Features
    RFmx Waveform Creator 19.0 includes the following new features:
    • Support for PXIe-5830 (EAP) and PXIe-5831 (EAP)
    • Support for Cat-M2 Uplink (Release 14) and Cat-NB2 Uplink in LTE modulation scheme
    • 5G new radio (NR) modulation scheme
      • Added support for Uplink Pi/2 BPSK Spectral Shaping
      • Support for downlink test models as defined in 3GPP TS 38.141-1 and 3GPP TS 38.141-2 (Change requests R4-1905121, R4-1905122 endorsed in April 2019, to be updated in v15.2.0 when it releases in June 2019)
    • Support for Resume Waveform Playback in Download and Play window
    RFmx Waveform Creator 3.0 includes the following new features:
    • Addition of 5G new radio (NR) modulation scheme
    • Support for launching the WLAN Generation SFP
    • Support for launching the Bluetooth Generation SFP
    • Support for PXIe-5820
    • Addition of crest factor reduction (CFR) in LTE, NR, and Multi-Carrier modulation schemes. Supported CFR types are Clipping and Peak Windowing.
    • Support for custom output sample rate in multi-carrier plugin.
    • GSM relative power per slot
    RFmx Waveform Creator 2.5 includes the following new features:
    • Support for waveform generation in eMTC uplink features such as,

      • Frequency Hopping
      • Guard symbols
    • Support for waveform generation in NB-IoT uplink features such as,

      • Single/multi tones
      • 15kHz/3.75kHz subcarrier spacing
      • NPUSCH Format 1/2
    • Support for LTE-LAA Resource Allocation Type 3
    • Support for 64-bit
    • Addition of the Waveform Summary window
    • Support for multi-carrier generation utility
    • Support for generating tones up to 1.25G
    • Support for updating the window duration based on LTE bandwidth
    • Improvements in the performance of waveform generation
    Supported HardwareVector Signal Generators
    • PXIe-5673
    • PXIe-5673E
    Device-specific information about these modules is included in the NI RF Vector Signal Generators Help.
    Vector Signal Transceivers
    • PXIe-5644
    • PXIe-5645
    • PXIe-5646
    • PXIe-5840
    • PXIe-5820
    • PXIe-5830 (EAP)
    • PXIe-5831 (EAP)
    Device-specific information about these modules is included in the NI RF Vector Signal Transceivers Help.
    System Requirements
    RFmx Waveform Creator has the following requirements:
    • Processor—1 GHz 64-bit (x64) processor
    • 4 GB RAM*
    • A screen resolution of 1,024 x 768
    • Windows 10/8.1/7, with all available critical updates and service packs
    *Depending on the amount of data acquired and/or processed, a larger amount of memory may be required.
    Supported Operating Systems
    RFmx Waveform Creator 19.0 supports the following 64-bit operating systems:
    • Windows 10/8.11/7 SP12
    • Windows Server 2012 R21
    • Windows Server 2008 R2 SP12
    1 NI software installs VC2015 Runtime and .NET 4.6.2. Windows 8.1 and Windows Server 2012 R2 require Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates.
    2 NI software is signed with a SHA-256 certificate. Windows 7 SP1 and Windows Server 2008 R2 SP1 require Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update.
    Note  In 2019, RFmx Waveform Creator dropped support for all 32-bit Windows operating systems. RFmx Waveform Creator will not install or run on an unsupported OS. Refer to RFmx Waveform Creator Drops Support for Windows 7 (64-Bit) and Windows Server 2008 R2 in 2021 for information about future OS support.
    Other Required Software
    • NI-RFSG 14.5 or later
    Installation Instructions
    NI installs RFmx Waveform Creator using NI Package Manager. If you do not already have NI software installed, RFmx Waveform Creator installs NI Package Manager to handle the installation of your NI software. Visit ni.com/info and enter the Info Code NIPMDownload to download NI Package Manager. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using NI Package Manager.
    Installed SoftwareInstalled Software
    • is an alias for the following National Instruments file folder location: Users\Public\Public Documents\National Instruments
    • is an alias for the following National Instruments file folder location:
      • Program Files (x86)\National Instruments\MeasurementStudioVS2010
    • is an alias for the following National Instruments file folder location:
      • Program Files (x86)\National Instruments
    • is an alias for the following file folder location:
      • Windows\SysWOW64 for 32-bit programs and windows\system32 for 64-bit programs

    File Locations
    ItemInstalled Location
    DLLs
    Examples\examples
    Executable
    Select Start»All Programs»National Instruments»RFmx Waveform Creator»RFmx Waveform Creator Examples to launch the RFmx Waveform Creator.
    Finding Examples
    You can access all the installed RFmx Waveform Creator examples at Start»All Programs»National Instruments»RFmx Waveform Creator»RFmx Waveform Creator Examples.
    Accessing the Documentation
    Documentation for RFmx Waveform Creator is located at Start»All Programs»National Instruments»RFmx Waveform Creator»RFmx Waveform Creator Documentation. The documentation set is composed of the following documents.
    DocumentFormatDescription
    RFmx Waveform Creator HelpHTML/Windows HelpInformation about the RFmx Waveform Creator. This help file is an HTML version of a traditional user manual that includes the following information:
    • An introduction to RFmx Waveform Creator
    • How to get started with the application
    • A complete reference of all the different modulation schemes supported
    RFmx Waveform Creator 19.0 ReadmeHTML (this document)Information about supported hardware and operating systems, new features, fixed issues, and legal notices.
    For the most recent revisions of documentation and for newly released documentation, visit ni.com/manuals.
    Product Security and Critical Updates
    Visit ni.com/security to view and subscribe to receive security notifications about National Instruments products. Visit ni.com/critical-updates for information about critical updates from National Instruments.
    Behavior Changes
    The following items are the behavior changes in RFmx Waveform Creator 19.0 from RFmx Waveform Creator 3.0.
    • 5G new radio (NR) modulation scheme
      • Deprecated support for Slot Offset control
      • Default value of downlink Channel Configuration Mode control has changed to Test Model from User defined.
      • Default value of BWP Number of RBs control has changed to -1 from maximum number of resource blocks.
      • Added SSB Active Blocks control and deprecated SSB Transmitted Pattern control under SS/PBCH Block configurations window.
    • Saving of waveforms in evaluation mode is not allowed in WLAN and Bluetooth
    The following items are the behavior changes in RFmx Waveform Creator 3.0 from RFmx Waveform Creator 2.5.
    • Fractional resampling is performed in LTE and NR carrier aggregation so that the final sample rate is a multiple of 3.84 MHz.
    • CCDF graph calculates PAPR based on generated waveform excluding OFF power period.
    • UI controls on the Download & Play window are reset based on selected device.
    The following items are the behavior changes in RFmx Waveform Creator 2.5 from RFmx Waveform Creator 2.4.
    • Updated the PAPR calculation for bursty signals in the presence of noise.
    • Removed restriction on configuring resource allocation type 0 and resource allocation type 1 settings in LTE.
    Known Issues
    The following item is a known issue in RFmx Waveform Creator 19.0.
    IDKnown Issue
    711673PAPR displayed on CCDF graph does not match with PAPR stored in the tdms file in User plugin.
    736118When Waveform Creator aggregates multiple carriers, it may adjust the carrier offsets to ensure resultant signal is phase continuous. To avoid coercions of the carrier offsets, set offsets to be an integer multiple of (1/signal duration). In case you are setting NR spacing type to Nominal, set Reference CC Index to a valid CC Index, instead of -1.
    Bug Fixes
    The following items are the IDs and titles of a subset of issues fixed in RFmx Waveform Creator. This is not an exhaustive list of issues fixed in the current version of the RFmx Waveform Creator. If you have a CAR ID, you can search this list to validate that the issue has been fixed.
    The following items are changes in RFmx Waveform Creator 19.0 from RFmx Waveform Creator 3.0
    IDFixed Issue
    734588Fixed an issue where the error message was getting cleared in Download and Play window when switching between windows
    732228Fixed an issue where the speed degradation in CFR operations for waveform size was less than 20M samples.
    724892Fixed an issue where the Graphics tab IQ FFT view was not scaling correctly in corner case when the bandwidth was increased.
    695883Fixed the issue of WFC precision being low, 14 bits.
    The following items are changes in RFmx Waveform Creator 3.0 from RFmx Waveform Creator 2.5
    IDFixed Issue
    704721Fixed the phase discontinuity issue on configuring GSM on first slot and EDGE on last slot.
    698120Fixed the issue where CCDF graph was reporting negative results for some configurations.
    701478Fixed the issue of not reporting burst start and stop locations for NB-IoT and eMTC FDD.
    705738 and 701490Fixed the issue of reporting incorrect burst PAPR for impaired bursty signal in Multi-Carrier and User plugins.
    712524Fixed the issue where IQ impairments per carrier set were incorrect, when multiple carrier sets are configured.
    The following items are changes in RFmx Waveform Creator 2.5 from RFmx Waveform Creator 2.4
    IDFixed Issue
    685187Fixed issue where an overflow error was reported on generating LTE.
    700390Fixed issue where the PAPR calculation for bursty signals with user plugin was incorrect.
    Automating the Installation of NI Products
    You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.
    If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
    For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:
    • For more information about silent installations of individual NI products, refer to Customize and Automate Installation of a Single Installer.
    • For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to Customize and Automate Installation of a Suited Installer.
    • To determine what version of NI Installers your product contains, refer to Determine Type and Version of My National Instruments Installer.
    Using NI Software with Microsoft Windows 10
    Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.
    Using NI Software with Microsoft Windows 8.1
    When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.
    RFmx Waveform Creator Drops Support for Windows 7 (64-Bit) and Windows Server 2008 R2 in 2021
    RFmx Waveform Creator will drop support for Windows 7 (64-bit) and Windows Server 2008 R2 starting in 2021. Versions of this product that ship after May 1, 2021, may not install or execute correctly on these operating systems. For detailed information about NI operating system support, visit ni.com/r/win32bitsupport.
    For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:
    ProductInfo Code
    LabVIEWlifecycle
    LabWindows/CVIcvi_lifecycle
    Measurement Studiomstudiolifecycle
    TestStandtslcp
    DIAdemddlcp
    SignalExpressselcp
    VeriStandnivslifecycle

    Legal Information
    Copyright
    © 2017–2019 National Instruments. All rights reserved.
    Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
    NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
    End-User License Agreements and Third-Party Legal Notices
    You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
    • Notices are located in the \_Legal Information and directories.
    • EULAs are located in the \Shared\MDF\Legal\license directory.
    • Review \_Legal Information.txt for information on including legal information in installers built with NI products.
    U.S. Government Restricted Rights
    If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
    IVI Foundation Copyright Notice
    Content from the IVI specifications reproduced with permission from the IVI Foundation.
    The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
    Trademarks
    Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
    Patents
    For patents covering the NI products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.

    377066F-01

    回复

    使用道具 举报

    您需要登录后才可以回帖 登录 | 注册会员

    本版积分规则

    LabVIEW HALCON图像处理入门教程
    石鑫华机器视觉与LabVIEW Vision图像处理PDF+视频教程11种全套
    《LabVIEW Vision函数实例详解》教程-NI Vision所有函数使用方法介绍,基于NI VISION2020,兼容VDM2021
    LabVIEW图像处理教程
    机器视觉商城淘宝店铺
    视觉论坛充值赞助方法

    QQ|机器视觉论坛 ( 粤ICP备13000975号 )|网站地图

    GMT+8, 2022-6-26 13:12

    Powered by Discuz! X3.4

    Copyright © 2001-2021, Tencent Cloud.

    快速回复 返回顶部 返回列表