机器视觉论坛微信公众号:石鑫华视觉网

 找回密码
 注册会员
查看: 94|回复: 0

[NI应用软件] NI RFmx Waveform Creator 2.3.1 Full Win32/64ENG RFmx波形创造器2.3.1完整版

[复制链接]
  • TA的每日心情
    奋斗
    7 小时前
  • 签到天数: 2554 天

    连续签到: 6 天

    [LV.Master]2000FPS

    发表于 2022-4-11 15:12:08 | 显示全部楼层 |阅读模式

    注册登陆后可查看附件和大图,以及购买相关内容

    您需要 登录 才可以下载或查看,没有账号?注册会员

    x
    Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件、模块、工具包、驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Activator来激活,以下链接可下载:
    NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
    http://pcmv.cn/thread-490-1-1.html

    视觉论坛的各种资源,除了视觉相关的模块有使用外,大部分的都不会使用,所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址,那视觉论坛也没有办法,只能尝试使用百度网盘地址下载;如果百度网盘的下载地址失效过期,可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好,有些时候速度很慢或大的资源下载很容易出错,这样会造成安装过程各种类型报错而无法安装。建议在下载完成后,对下载资源做校验和验证(NI一般会提供MD5或SHA256等),与官方或视觉论坛提供的校验和对比,一致就可以安装,如果不一致,则需要重新下载。视觉论坛早期下载的资源,那时候NI没有这么多限制,基本上都是正常下载的资源;后期下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘,所以百度网盘的资源基本上是正确的。校验和工具下载地址:
    文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
    http://pcmv.cn/thread-26524-1-1.html

    NI RFmx Waveform Creator 2.3.1 Full Win32/64ENG RFmx波形创造器2.3.1完整版

    RFmx Waveform Creator
    RFmx Waveform Creator可帮您创建、可视化和再现通用型、蜂窝、连接性、物联网(IoT)、航空航天/防卫测试应用程序的波形。
    RFmx Waveform Creator是一款应用软件,您可以用来创建通用的和基于标准的波形,用于设计、验证和生产测试应用。借助这款软件,您可以结合信号发生器以交互方式生成波形,或保存开放的、未锁定的波形文件,用于借助自动仪器进行回放或仿真波形。该软件内置有标准的信号配置;您也可以修改、保存和加载自己的自定义波形参数。此外,在预览时域、频域和功率域的信号特征之前,您可以使用RFmx Waveform Creator来应用信号减损、滤波、波峰因子降低(CFR)等功能。

    发布日期:
    2017/10/16
    包含的版本:
    2.3.1完整版
    受支持的操作系统:
    Windows 10
    Windows Server 2008 R2 64-bit
    Windows 8.1
    Windows 7
    语言:
    英文
    应用程序位数:
    32/64位
    校验和:
    文件大小: 280510472 字节 (267.52 MB)
    修改日期: 2017-10-13 00:31
    MD5: b77c6fe60bdcd82a3f314debd9459534
    SHA1: 5ca7e1c2ee43fa9066d6d5971a929c52f60868ea
    SHA256: 55ab14e24bad92a683b3cdf68106c5e46272a8ed77d7f36bc51ed553a63d297e
    CRC32: 40807a7d

    百度网盘和NI官方下载地址:
    注册登陆视觉论坛用户,购买附件查看下载地址
    RFmx Waveform Crreator 2.3.1.txt (534 Bytes, 下载次数: 0, 售价: 10 快钱)

    NI-RFmx Waveform Creator 2.3.1 Readme
    September 2017
    This file contains important information about NI-RFmx Waveform Creator and is organized into the following sections:
    Supported Hardware
    System Requirements
    Installed Software, Documentation, and Examples
    Executable
    Documentation
    Product Security and Critical Updates
    Uninstalling/Modifying NI-RFmx Waveform Creator
    Known Issues
    Automating the Installation of NI Products
    Using NI Software with Microsoft Windows 10
    Using NI Software with Microsoft Windows 8.1
    Legal Information

    Supported HardwareVector Signal Generators
    • NI PXIe-5673
    • NI PXIe-5673E
    Device-specific information about these modules is included in the NI RF Vector Signal Generators Help.
    Vector Signal Transceivers
    • NI PXIe-5644R
    • NI PXIe-5645R
    • NI PXIe-5646R
    • NI PXIe-5840
    Device-specific information about these modules is included in the NI RF Vector Signal Transceivers Help.
    System RequirementsSupported Operating Systems
    NI-RFmx Waveform Creator 2.3.1 supports the following operating systems:
    • Windows 10/8.11/7 SP12 (32-bit and 64-bit)
    • Windows Server 2008 R2 SP12 (64-bit)
    1 NI software installs VC2015 Runtime and .NET 4.6.2. Windows 8.1 and Windows Server 2012 R2 require Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates.
    2 NI software is signed with a SHA-256 certificate. Windows 7 SP1, Windows Embedded Standard 7 SP1, and Windows Server 2008 R2 SP1 require Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update.
    Note  NI-RFmx Waveform Creator 2.3.1 does not support Windows Server non-R2 editions.
    NI recommends that you have the most recent service pack for your operating system installed.
    Minimum Requirements
    • Processor—Intel i3 or equivalent
    • RAM—2 GB*
    • Microsoft Internet Explorer 5.5 or later
    • A screen resolution of 1300 x 700 with 256 colors
    • Windows 10/8.1/7, with all available critical updates and service packs
    • Adobe Reader
    *Depending on the amount of data acquired and/or processed, a larger amount of memory may be required.
    Recommended System
    • Processor—Intel i5 or equivalent
    • RAM—4 GB*
    • Microsoft Internet Explorer 5.5 or later
    • A screen resolution of 1300 x 700
    • Windows 10/8.1/7, with all available critical updates and service packs
    • Adobe Reader
    *Depending on the amount of data acquired and/or processed, a larger amount of memory may be required.
    Other Required Software
    • NI-RFSG 14.5 or later
    Installed Software, Documentation, and ExamplesInstalled Software
    • is an alias for the following National Instruments file folder location:
      • (32-bit OS) Program Files\National Instruments
      • (64-bit OS) Program Files (x86)\National Instruments for 32-bit programs
    • is an alias for the following National Instruments file folder location: Users\Public\Public Documents\National Instruments
    File Locations
    ItemInstalled Location
    DLLs
    Examples\examples
    Executable
    Select Start»All Programs»National Instruments»NI-RFmx Waveform Creator»NI-RFmx Waveform Creator to launch the NI-RFmx Waveform Creator.
    Documentation
    Documentation for NI-RFmx Waveform Creator is located at Start»All Programs»National Instruments»NI-RFmx Waveform Creator»NI-RFmx Waveform Creator Documentation. The documentation set is composed of the following documents.
    DocumentFormatDescription
    NI-RFmx Waveform Creator HelpHTML/Windows HelpThis help file is an HTML version of a traditional user manual that provides an introduction to the NI-RFmx Waveform Creator.
    NI-RFmx Waveform Creator User GuideHTML (.chm)This help file provides detailed information on the different modulation schemes that NI-RFmx Waveform Creator supports.
    NI-RFmx Waveform Creator Getting Started GuideHTML (.chm)This help file provides a quick look at the waveform setup procedure.
    NI-RFmx Waveform Creator 2.3.1 ReadmeHTML (this document)Information about supported hardware and operating systems, new features, fixed issues, and legal notices.
    For the most recent revisions of documentation and for newly released documentation, visit ni.com/manuals.
    Product Security and Critical Updates
    Visit ni.com/security to view and subscribe to receive security notifications about National Instruments products. Visit ni.com/critical-updates for information about critical updates from National Instruments.
    Uninstalling/Modifying NI-RFmx Waveform Creator
    For Windows 7, complete the following steps:
    • Launch the Control Panel by selecting Start»Control Panel.
    • Double-click Programs and Features.
    • Select National Instruments Software.
    • Click the Uninstall/Change button.
    • Select NI-RFmx Waveform Creator 2.3.1 from the dialog box that appears.
    • Click Remove to uninstall the product; click Modify to change the components that are installed.
    For Windows 10/8.1, complete the following steps:
    • Right-click on the Start button.
    • Select Control Panel.
    • Select Programs» Programs and Features.
    • Select National Instruments Software.
    • Click the Uninstall button.
    • Select NI-RFmx Waveform Creator 2.3.1 from the dialog box that appears.
    • Click Remove to uninstall the product; click Modify to change the components that are installed.
    Caution  Several of the software packages listed above are shared with other NI software packages. If you attempt to remove a piece of software that something else is dependent on, a message launches to warn you about the software dependencies. You can choose to either uninstall all of the software or to leave the shared software installed. If you choose to uninstall the shared software, some of your other NI software may no longer function correctly.
    Note  Do not attempt to uninstall by manually deleting files.
    Known Issues
    You can access the software and documentation known issues list online. Refer to the NI-RFmx Waveform Creator 2.3.1 Known Issues at ni.com for an up-to-date list of known issues in NI-RFmx Waveform Creator 2.3.1.
    Automating the Installation of NI Products
    You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.
    • For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
    • For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to KB 4GGGDQH0, How Do I Automate the Installation of a Suited Installer?.
    • To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My NI Installer?.
    Using NI Software with Microsoft Windows 10
    Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.
    Using NI Software with Microsoft Windows 8.1
    When you install National Instruments software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.

    Legal Information
    Copyright
    © 2017 National Instruments. All rights reserved.
    Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
    National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
    End-User License Agreements and Third-Party Legal Notices
    You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
    • Notices are located in the \_Legal Information and directories.
    • EULAs are located in the \Shared\MDF\Legal\license directory.
    • Review \_Legal Information.txt for information on including legal information in installers built with NI products.
    U.S. Government Restricted Rights
    If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
    IVI Foundation Copyright Notice
    Content from the IVI specifications reproduced with permission from the IVI Foundation.
    The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
    Trademarks
    Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
    Patents
    For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
    377066B-01
    回复

    使用道具 举报

    您需要登录后才可以回帖 登录 | 注册会员

    本版积分规则

    LabVIEW HALCON图像处理入门教程
    石鑫华机器视觉与LabVIEW Vision图像处理PDF+视频教程11种全套
    《LabVIEW Vision函数实例详解》教程-NI Vision所有函数使用方法介绍,基于NI VISION2020,兼容VDM2021
    LabVIEW图像处理教程
    机器视觉商城淘宝店铺
    视觉论坛充值赞助方法

    QQ|机器视觉论坛 ( 粤ICP备13000975号 )|网站地图

    GMT+8, 2022-6-25 18:40

    Powered by Discuz! X3.4

    Copyright © 2001-2021, Tencent Cloud.

    快速回复 返回顶部 返回列表