视觉论坛VISIONBBS|视觉之家VISIONHOME微信公众号:石鑫华视觉网

 找回密码
 注册会员
查看: 72|回复: 0

[NI软件套件] NI FRC LabVIEW 2022 Win32Eng FIRST机器人竞赛软件套件FRC2022(基于LabVIEW2020SP1)

[复制链接]
  • TA的每日心情

    4 小时前
  • 签到天数: 2516 天

    连续签到: 15 天

    [LV.Master]2000FPS

    发表于 2022-3-14 18:13:16 | 显示全部楼层 |阅读模式

    注册登陆后可查看附件和大图,以及购买相关内容

    您需要 登录 才可以下载或查看,没有账号?注册会员

    x
    Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件、模块、工具包、驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Activator来激活,以下链接可下载:
    NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
    http://pcmv.cn/thread-490-1-1.html

    视觉论坛的各种资源,除了视觉相关的模块有使用外,大部分的都不会使用,所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址,那视觉论坛也没有办法,只能尝试使用百度网盘地址下载;如果百度网盘的下载地址失效过期,可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好,有些时候速度很慢或大的资源下载很容易出错,这样会造成安装过程各种类型报错而无法安装。建议在下载完成后,对下载资源做校验和验证(NI一般会提供MD5或SHA256等),与官方或视觉论坛提供的校验和对比,一致就可以安装,如果不一致,则需要重新下载。视觉论坛早期下载的资源,那时候NI没有这么多限制,基本上都是正常下载的资源;后期下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘,所以百度网盘的资源基本上是正确的。校验和工具下载地址:
    文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
    http://pcmv.cn/thread-26524-1-1.html

    NI FRC LabVIEW 2022 Win32Eng FIRST机器人竞赛软件套件FRC2022(基于LabVIEW2020SP1)

    FRC LabVIEW软件
    FRC LabVIEW软件提供的组件专为FIRST机器人竞赛(FRC)参与者使用LabVIEW编程机器人而开发。
    FRC LabVIEW软件是一个软件套件,为FRC提供了使用LabVIEW所需的软件组件。该套件包括LabVIEW专业版以及LabVIEW Real-Time模块和LabVIEW视觉开发模块等软件附件。FRC LabVIEW软件还包括相关的驱动程序。

    发布日期
    2021/10/7
    包含的版本
    2022完整版
    受支持的操作系统
    Windows 10 64-bit
    Windows Server 2016 64-bit
    Windows Server 2019 64-bit
    应用程序位数
    32位
    语言
    English
    校验和
    文件大小: 9642061824 字节 (8.98 GB)
    修改日期: 2021-09-24 18:05
    MD5: 041dbac231ac3e66c5de5f7bfa945d43
    SHA1: f93f9dcb81ba8d04f3064b27593c9e16ce6afeb6
    SHA256: cc42ace0fbfb882ddc9bea14e60421b30e512acb85b0d9996bd29fd69c0fcc32
    CRC32: e689fcf3

    百度网盘与NI官方下载地址:
    FRC LabVIEW2022.txt (597 Bytes, 下载次数: 0, 售价: 30 快钱)

    LabVIEW Software for FRC 2022 Readme
    September 2021
    The LabVIEW Software for FRC 2022 includes the LabVIEW 2020 SP1 Professional Development System and other software components that you can use to program your robot.

    To obtain the FRC API, examples, and utilities like the Driver Station and roboRIO Imaging Tool, install the FRC Game Tools 2022 installer after the FRC kickoff. Visit the FRC Resource Hub for more information about the software updates after kickoff.


    Installation Options
    LabVIEW Software for FRC 2022 has two installation options. Teams Using LabVIEW for robot programming should select installation option 1. Teams using text-based languages should select installation option 2.

    1. Installation Instructions for Teams Using LabVIEW for Development
    This option allows you to program your robot in LabVIEW, perform vision analysis, and capture from USB cameras.
    • Launch the installer. This will initiate a pre-install of NI Package Manager. After the NI package manager installation completes, you will be presented with a list of software to install.
    • On the "Select Products" dialog, accept the default selections. This includes:
      • LabVIEW (32-bit) English - 2020 SP1
      • LabVIEW Real-Time Module English - 2020
      • Vision Development Module - 2021
      • LabVIEW Robotics Module for FRC - 2020
      • NI CompactRIO - 21.0.0
      • NI-IMAQdx driver - 21.0.0
    • On the "Additional items you may wish to install" dialog, accept the default selections. NOTE: If you do not accept the default selections, it is likely that some components required for programming your robot will not be installed.
    • Accept the licensing agreements and proceed through the installation wizard.
    This option has the following system requirements:
    • Operating System: Windows 10/8.1
    • Free Space Before Install: 42.1GB Free Space After Vision Install: 35.1GB Free Space after full install: 19.6 Disk Footprint: 15.2 GB

    2. Installation Instructions for Teams Using Text-Based Languages for Development
    This option allows you to perform vision analysis and capture from USB cameras from text-based languages.
    • Launch the installer. This will initiate a pre-install of NI Package Manager. After the NI package manager installation completes, you will be presented with a list of software to install.
    • On the "Select Products" dialog, select the following:
      • Vision Development Module - 2021
      • NI-IMAQdx driver - 21.0.0
    • On the "Additional items you may wish to install" dialog, accept the default selections. NOTE: If you do not accept the default selections, it is likely that some components required for programming your robot will not be installed.
    • Accept the licensing agreements and proceed through the installation wizard.
    This option has the following system requirements:
    • Operating System: Windows 10/8.1
    • Disk Footprint: 8.2 GB

    Additional NI Software
    You may also download the following NI software from ni.com and license it using your serial number.
    • Multisim Education Edition
    • Ultiboard Education Edition
    • LabVIEW Statechart Module


    Copyright
    © 2009–2022 National Instruments Corporation. All rights reserved.
    Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
    NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
    End-User License Agreements and Third-Party Legal Notices
    You can find end-user license agreements (EULAs) and third-party legal notices in the following locations:
    • Notices are located in the <National Instruments>\_Legal Information and <National Instruments> directories.
    • EULAs are located in the <National Instruments>\Shared\MDF\Legal\license directory.
    • Review <National Instruments>\_Legal Information.txt for information on including legal information in installers built with NI products.
    U.S. Government Restricted Rights
    If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
    IVI Foundation Copyright Notice
    Content from the IVI specifications reproduced with permission from the IVI Foundation.
    The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
    Trademarks
    LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments Corporation. Refer to the Trademark Information at ni.com/trademarks for other National Instruments trademarks.
    Other product and company names mentioned herein are trademarks or trade names of their respective companies.
    Patents
    For patents covering the NI products/technology, refer to the appropriate location: Help&#187;Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.
    378191C-01

    回复

    使用道具 举报

    您需要登录后才可以回帖 登录 | 注册会员

    本版积分规则

    LabVIEW HALCON图像处理入门教程
    石鑫华机器视觉与LabVIEW Vision图像处理PDF+视频教程11种全套
    《LabVIEW Vision函数实例详解》教程-NI Vision所有函数使用方法介绍,基于NI VISION2020,兼容VDM2021
    LabVIEW图像处理教程
    机器视觉商城淘宝店铺
    视觉论坛充值赞助方法

    QQ|机器视觉论坛PCMV.CN ( 粤ICP备13000975号 )|网站地图

    GMT+8, 2022-5-16 15:42

    Powered by shixinhua.com X3.4

    © 2009-2022 VISIONBBS.COM 浏览量:

    快速回复 返回顶部 返回列表