NI-FGEN 2.9.1 Driver Win32/64 Eng/Jpn NI-FGEN波形发生器仪器驱动程序2.9.1

石鑫华视觉

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

NI-FGEN 2.9.1 Driver Win32/64 Eng/Jpn NI-FGEN波形发生器仪器驱动程序2.9.1

NI-FGEN
NI-FGEN为使用NI波形发生器产品的客户提供支持。
NI-FGEN是一款NI仪器驱动程序，可实现复杂测量解决方案所需的频率扫描和跳频、波形链接和循环以及频移键控(FSK)调制。 NI-FGEN驱动程序可兼容可互换虚拟仪器(IVI)，它具有一系列操作和属性，可以执行波形或信号发生器的功能，并提供交互式软件前面板和示例。

Win32/64Eng/Jpn
2.9.1
文件大小: 1840118747 字节 (1.71 GB)
修改日期: 2019-06-25 03:08
MD5: 3ad349a7a81dd6917089ce44e4d74023（官方正确）
SHA1: fc40e4fbc7739b6d26ef97ccb61e104411cd030b
SHA256: 9e425fdd35d3bb3fadfeadb34b3e037d8690e4174fe0f813d9ee19d8bc87b85c
CRC32: 64d9e0aa

百度网盘与NI官方下载地址：
FGEN2.9.1.txt (584 Bytes, 下载次数: 0, 售价: 10 元)

2021-1-17 23:27 上传

点击文件名下载附件

NI-FGEN Instrument Driver Readme

Version 2.9.1

---

Thank you for using NI-FGEN for Windows 7/Vista/XP. This file contains important information about NI-FGEN and is organized into the following sections:

• New Features
• Supported Hardware
• System Requirements
• Installed File Names and Locations
  
  • Documentation
  • The FGEN Soft Front Panel
    
• Updates and Notifications
• Uninstalling/Modifying NI-FGEN
• Upgrading Firmware
• Known Issues
• Bug Fixes
• API Changes by Release
• Automating the Installation of NI Products
• Important Information
  

---

New Features

NI-FGEN 2.9.1 includes the following new features:

• Support for LabVIEW 2012 (32-bit) and LabVIEW 2012 (64-bit).
• Support removed for LabVIEW 8.6.1.
  

NI-FGEN 2.9 includes the following new features:

• Support for streaming write timeout.
• Improved I/Q rate reconfiguration time for the NI PXIe-5450 and NI PXIe-5451.
• Support for including NI-FGEN run-time in custom installers built using National Instruments application development environments (ADEs). This installer contains instrument driver run-time components required to deploy applications using NI signal generators.
  Notes:
  
  
  • The run-time installer does not contain support for interactively configuring or testing hardware using Measurement & Automation Explorer (MAX), NI LabVIEW SignalExpress, or the FGEN Soft Front Panel.
  • The run-time installer does not support upgrading from NI-FGEN 2.8.x or earlier, or NI-DAQmx 8.9.x or earlier. You must uninstall these products prior to installing the NI-FGEN run-time installer.
  • The run-time installer does not support the NI 5401, NI 5411, or NI 5431.
    
  
  

NI-FGEN 2.8.1 includes the following new features:

• Support for LabVIEW 2011 (32-bit) and LabVIEW 2011 (64-bit).
• Support removed for LabVIEW 8.5.1.
  

NI-FGEN 2.8 includes the following new features:

• Support for peer-to-peer streaming with the NI PXIe-5450 (module revision C only) and NI PXIe-5451.
• New firmware for the NI PXIe-5450 and NI PXIe-5451. This firmware upgrade is required for all NI PXIe-5450 and NI PXIe-5451 devices. Refer to Upgrading Firmware for more information about this new firmware.
• Support to reset writeable attributes to driver default values. In C, call the niFgen_ResetAttribute function. In LabVIEW, right-click the niFgen Property Node, and select Change To»Default Value.
• Support for stream n script instruction.
  

NI-FGEN 2.7.4 includes the following new features:

• Support for LabVIEW 2010 (32-bit) and LabVIEW 2010 (64-bit).
• Fixed an issue in which a custom installer built on a 32-bit OS using LabVIEW, LabWindows™/CVI™, or NI TestStand does not deploy NI-FGEN or its dependent user applications on a 64-bit OS (ID 228650).
• Support removed for LabVIEW 8.2.1.
  

NI-FGEN 2.7.2 includes the following new feature:

• Fixed a fatal issue when upgrading NI-FGEN 2.7 when using Windows 7 (64-bit) and Windows Server 2008 R2.
  

NI-FGEN 2.7 includes the following new features:

• Support for the NI PXIe-5451 400 MS/s, 16-bit dual-channel arbitrary waveform generator with onboard signal processing (OSP).
• Support for LabVIEW 2009 (64-bit).
• Support for 64-bit user mode.
• Support for new NI PXIe-5442 and NI PXIe-5450 module revisions.
• Support for Standard Function output mode on the NI PXIe-5450 module revision C.
• New firmware for the NI PXIe-5442 and NI PXIe-5450. Refer to Upgrading Firmware for more information about this new firmware.
• Support for wait with marker and break script instructions.
• New VIs, properties, functions, and attributes.
  

Supported Hardware

The following table shows which hardware products are supported in this release under particular operating systems.

Hardware Product	Supported Under Windows 7/Vista1	Supported Under Windows XP1
NI PXI/PCI-5401 Function Generator	X2	√
NI PXI/PCI-5402 Function Generator	√	√
NI PXI-5404 Frequency Generator	√3	√
NI PXI/PCI-5406 Function Generator	√	√
NI PXI/PCI-5411 Arbitrary Waveform Generator	X2	√
NI PXI/PCI-5412 Arbitrary Waveform Generator	√	√
NI PXI/PCI-5421 Arbitrary Waveform Generator	√	√
NI PXI-5422 Arbitrary Waveform Generator	√	√
NI PXI/PCI-5431 Video Signal Generator	X2	√
NI PXI-5441 Arbitrary Waveform Generator with Onboard Signal Processing	√	√
NI PXIe–5442 Arbitrary Waveform Generator with Onboard Signal Processing	√	√
NI PXIe–5450 Dual-Channel I/Q Generator with Onboard Signal Processing	√	√
NI PXIe–5451 Dual-Channel Arbitrary Waveform Generator with Onboard Signal Processing	√	√
1 MXI Express and MXI-4 are supported on Windows 7/Vista/XP, but MXI-3 is supported on only Windows XP. 2Simulating these devices is also not supported on Windows 7/Vista, using either the NI-FGEN or the FGEN Soft Front Panel. Simulating a device that is not supported on your operating system results in indeterminate behavior. 3 Windows 7/Vista support for the NI 5404 does not include support for external calibration. Perform external calibration for the NI 5404 on Windows XP operating systems.

Device-specific information about these signal generators is included in the NI Signal Generators Help.

System RequirementsSupported Operating Systems

NI-FGEN 2.9.1 supports the following operating systems:

• Windows 7 (32-bit and 64-bit)
• Windows Vista (32-bit and 64-bit)
• Windows XP Service Pack 2 (32-bit)
• Windows Server 2003 R2 (32-bit)
• Windows Server 2008 R2 (64-bit)
  

Note  NI-FGEN 2.9.1 does not support Windows Server non-R2 editions.

It is recommended that you have the most recent service pack for your operating system installed. Windows 2000 users must use NI-FGEN 2.7.3 or earlier.

Supported Real-Time Operating Environments

NI-FGEN 2.9.1 supports the following real-time operating environments:

• LabVIEW Real-Time Module
• LabWindows/CVI Real-Time Module
  

Minimum System Requirements

• Processor—Pentium III/Celeron 600 MHz or equivalent
• RAM—
  
  • Windows 7/Vista: 512 MB
  • Windows XP Service Pack 3 (SP3): 128 MB
    
  
  

• Microsoft Internet Explorer 5.5 or later
• A screen resolution of 800 x 600 with 256 colors
• Windows 7/Vista/XP SP3, with all available critical updates and service packs
  

Recommended System

• Processor—Pentium 4 or equivalent
• RAM—
  
  • Windows 7/Vista: 1 GB
  • Windows XP SP3: 256 MB
    
• A screen resolution of 1,024 x 768
• Windows 7/Vista/XP SP3, with all available critical updates and service packs
  

Application Development Environments (ADEs)

• NI LabVIEW 2009 SP1 (32-bit), 2009 SP1 (64-bit), 2010 SP1 (32-bit), 2010 SP1 (64-bit), 2011 SP1 (32-bit), 2011 SP1 (64-bit), 2012 (32-bit), or 2012 (64-bit)
• NI LabVIEW Real-Time Module 2009 SP1, 2010 SP1, 2011 SP1, or 2012 (no support for NI PXI/PCI-5401/5411/5431 devices)
• LabWindows/CVI 9.0.1 or later
• LabWindows/CVI Real-Time Module 2009 or later (no support for NI PXI/PCI-5401/5411/5431 devices)
• Measurement Studio 6.0 or later
• Microsoft Visual C++ (MSVC) 6.0 or later
• If you are running your application on an RT target, 128 MB of memory or more is required.
  

Installed File Names and Locations

• is an alias for the following National Instruments file folder location:
  
  • Windows 7/Vista: Users\Public\Documents\National Instruments
  • Windows XP: Documents and Settings\All Users\Shared Documents\National Instruments
    
• is an alias for the following National Instruments file folder location:
  
  • Windows 7/Vista/XP 32-bit: Program Files\IVI Foundation\IVI\
  • Windows 7/Vista 64-bit: Program Files (x86)\IVI Foundation\IVI\

    NOTES:	$(IVIROOTDIR32) is configured as an environment variable on the target system.
    	If you upgraded an installation of IVI, your files may be in the following location: Windows 7/Vista/XP 32-bit: Program Files\IVI\ Windows 7/Vista 64-bit: Program Files (x86)\IVI\

    
    
• is an alias for the following National Instruments file folder location:
  
  • Windows 7/Vista 64-bit: Program Files\IVI Foundation\IVI\

    NOTE:

    $(IVIROOTDIR64) is configured as an environment variable on the target system.

    
    
  
  

File Locations

Item	Installed Location on Windows 7 (32-bit)/Vista (32-bit)/XP
NI-FGEN	\Drivers\niFgen
NI-FGEN Function Panel	\Drivers\niFgen\nifgen.fp
NI-FGEN Examples	\NI-FGEN\Examples
NI-FGEN Header files	\Include
NI-FGEN Import Library files	\Lib
NI-FGEN DLL	\Bin

Additional File Locations for Windows 7 (64-bit)/Vista (64-bit)

Item	Installed Location on Windows 7 (64-bit)/Vista (64-bit)
NI-FGEN Function Panel	\Drivers\niFgen\nifgen.fp
NI-FGEN Header files	\Include
NI-FGEN Import Library files (64-bit)	\Lib_x64
NI-FGEN DLL (64-bit)	\Bin

Documentation

Documentation is available at Start»All Programs»National Instruments»NI-FGEN»Documentation. The documentation set is composed of the following documents:

• NI Signal Generators Getting Started Guide
• NI Signal Generators Help
• Specifications
• Calibration procedures
  

Note  To view many of these documents, you need to have Adobe Acrobat Reader installed. You can install the viewer from www.adobe.com/acrobat.

Visit ni.com/manuals to find the latest versions of product documentation.

The FGEN Soft Front Panel (SFP)

The FGEN Soft Front Panel (SFP) is accessible from Start»All Programs»National Instruments»NI-FGEN.

You can find example waveform and function files in the Program Files\IVI Foundation\IVI\Drivers\niFgen\Examples\Waveforms\ directory and in the Program Files (x86)\IVI Foundation\IVI\Drivers\niFgen\Examples\Waveforms\ directory on the 64-bit version of Windows 7/Vista. Refer to Waveform description.txt in the Waveforms folder for an explanation of the provided waveforms.

Updates and Notifications

National Instruments releases critical software updates after product release using the NI Update Service. Visit ni.com/info and enter updates to view a list of all currently available updates.

National Instruments provides notification of certain critical issues at install time. Visit ni.com/info and enter notifications to view a list of current product notifications.

Uninstalling/Modifying NI-FGEN

Perform the following procedure to uninstall NI-FGEN 2.9.1:

For Windows XP, complete the following steps:

• Launch the Control Panel by selecting Start»Control Panel.
• Double-click Add/Remove Programs.
• Select National Instruments Software.
• Click Change/Remove.
• Select NI-FGEN 2.9.1 from the dialog box that appears.
• Click Remove to uninstall the product; click Modify to change the components that are installed.
  

For Windows 7/Vista, complete the following steps:

• Launch the Control Panel by selecting Start»Control Panel.
• Double-click Programs and Features.
• Select National Instruments Software.
• Click the Uninstall/Change button.
• Select NI-FGEN 2.9.1 from the dialog box that appears.
• Click Remove to uninstall the product; click Modify to change the components that are installed.
  

As part of the NI-FGEN 2.9.1 installation, the following list of software was installed. To completely remove NI-FGEN 2.9.1 from your system, you must remove all of these packages in addition to NI-FGEN.

• NI-FGEN Run-Time 2.9.1
• NI Hierarchical Waveform Storage 1.5
• NI IVI Compliance Package 4.4
• NI Measurement & Automation Explorer 5.0
• Traditional NI-DAQ 7.4.4 (Windows XP only)
• NI-DAQmx 9.1.7
• NI-VISA Run-Time 5.0
• NI I/O Trace 3.0
  

Caution  Several of the software packages listed above are shared with other NI software packages. If you attempt to remove a piece of software that something else is dependent on, a message launches to warn you about the software dependencies. You can choose to either uninstall all of the software or to leave the shared software installed. If you choose to uninstall the shared software, some of your other NI software may no longer function correctly.

Note  Do not attempt to uninstall by manually deleting files.

Upgrading Firmware

The NI PXIe-5442, NI PXIe-5450, and NI PXIe-5451 have upgradeable device firmware. It is highly encouraged and may be required that you upgrade the firmware on these devices; newer firmware contains new features and important bug fixes. To update the firmware, run the Firmware Updater application for your device (54xxFirmwareUpdater_X.Y.Z.exe, where 54xx is the name of the device and X.Y.Z is the firmware version) that is installed in the Program Files\IVI Foundation\IVI\Drivers\niFgen\ directory or the Program Files (x86)\IVI Foundation\IVI\Drivers\niFgen\ directory. This application upgrades your firmware to the latest available version that works with this driver. After the application runs, you are required to power down your computer and PXI Express chassis to complete the firmware update.

Known Issues

You can access the software and documentation known issues list online. Refer to the NI-FGEN 2.9 Known Issues List at ni.com for an up-to-date list of known issues in NI-FGEN 2.9.1.

Bug Fixes

The following items are fixed in NI-FGEN 2.9.1 from NI-FGEN 2.9

Bug ID	Fixed Issue
317520	Fixed an issue where an error occured when trying to build an installer in LabVIEW for NI-FGEN 2.9 executable.

The following items are fixed in NI-FGEN 2.9 from NI-FGEN 2.8.1

Bug ID	Fixed Issue
242645	Fixed an issue in which NI-FGEN does not report the correct error when LabVIEW FPGA 2010 is installed. You must install LabVIEW FPGA 2010 SP1 for this bug fix.
240183	Fixed an issue in which using dynamic FPGA interfaces in the LabVIEW FPGA Module were not supported when using peer-to-peer streaming. You must install NI-RIO 3.5.1 for this bug fix.
280577	Fixed an issue in which NI-FGEN returns an incorrect error description when an invalid session handle is passed into NI-FGEN VIs.
314922	Fixed an issue in which NI-FGEN returns an incorrect maximum waveform size after you call the niFgen Clear Arbitrary Memory VI on NI PXIe-5450 and NI PXIe-5451.
313189	Fixed an issue in which LabVIEW could crash when reading the Gain DAC Value property.
N/A	Fixed an issue in which NI-FGEN could return an unrecoverable error when transitioning to the Committed state by calling the niFgen Commit VI, the niFgen_Commit function, or calling a create or write waveform VI or function. You must install NI-DAQmx 9.0 or later for this bug fix.

The following items are fixed in NI-FGEN 2.8 from NI-FGEN 2.7.4

Bug ID	Fixed Issue
241656	Fixed firmware to synchronize power supplies for improved phase noise performance.
199899	Fixed an issue in which calling calibration utility functions in a normal NI-FGEN session affected output by disabling self-calibration constants.
182502	Fixed an issue in which running test panels for the NI PXIe-5450 and NI PXIe-5451 using the LabVIEW Real-Time Module did not write waveform data. This issue caused the output signal to be random.
183093	Fixed an issue in which waking from sleep mode could crash the operating system in some configurations, especially if the video, network, or other drivers were out of date.
187791	An issue was fixed in which LabVIEW 2009 (64-bit) could crash if you created more than one session using the same resource name. You must install LabVIEW 2009 SP1 (64-bit) for this bug fix.

The following items are fixed in NI-FGEN 2.7.4 from NI-FGEN 2.7.3

Bug ID	Fixed Issue
228650	Fixed an issue in which a custom installer built on a 32-bit OS using LabVIEW, LabWindows/CVI, or NI TestStand does not deploy NI-FGEN or its dependent user applications on a 64-bit OS.

The following items are fixed in NI-FGEN 2.7.3 from NI-FGEN 2.7.2

Bug ID	Fixed Issue
229602	Fixed an issue with clock configuration that can cause memory corruption or blue screen with certain NI PXIe-5450 devices.
212209	Fixed an incorrect calibration DAC setting that could cause self-calibration to fail on the NI PXIe-5451.

The following items are fixed in NI-FGEN 2.7.2 from NI-FGEN 2.7

Bug ID	Fixed Issue
209051	Fixed an issue in which the installer did not stop service nidevldu before upgrading binaries.

The following items are fixed in NI-FGEN 2.7 from NI-FGEN 2.6.3

Bug ID	Fixed Issue
179935	Fixed a streaming issue on the NI PXIe-5442/5450. Streaming with certain combinations of chassis and controllers caused the device to return an invalid thermal error and detach itself from the system. You must upgrade your firmware for this solution.
157714	Fixed a memory leak that occurred when a session was opened and closed dynamically using VI server on LabVIEW Real-Time targets.
118345	Toggle markers are now allowed below 200 MS/s sample rates on the NI PXIe-5450.
39796	An error is now returned when PXI_STAR is used as a trigger source for the NI PXIe-5442. This configuration is not supported.
118500	The NI PXIe-5450 now supports the Oscillator Phase DAC property and NIFGEN_ATTR_OSCILLATOR_PHASE_DAC_VALUE attribute for external Sample clocks.

API Changes by Release

Changes in NI-FGEN 2.9 from NI-FGEN 2.8.1

Property	niFgen Streaming Write Timeout
Attribute	NIFGEN_ATTR_STREAMING_WRITE_TIMEOUT

Changes in NI-FGEN 2.8 from NI-FGEN 2.7.4

VIs	niFgen Get Stream Endpoint Handle
	niFgen Manual Enable P2P Stream
	niFgen Configure P2P Endpoint Fullness Start Trigger
	niFgen Write P2P Endpoint I16
Functions	ViStatus _VI_FUNC niFgen_GetStreamEndpointHandle (ViSession vi, ViConstString streamEndpoint, ViInt32* readerHandle);
	ViStatus _VI_FUNC niFgen_ManualEnableP2PStream (ViSession vi, ViConstString endpointName);
	ViStatus _VI_FUNC niFgen_ConfigureP2PEndpointFullnessStartTrigger (ViSession vi, ViInt32 p2pEndpointFullnessLevel);
	ViStatus _VI_FUNC niFgen_WriteP2PEndpointI16 (ViSession vi, ViConstString endpointName, ViInt32 numberOfSamples, ViInt16 endpointData[]);
	ViStatus _VI_FUNC niFgen_ResetAttribute (ViSession vi, ViConstString channelName, ViAttr attributeId);
	ViStatus _VI_FUNC niFgen_SetAttributeViInt64 (ViSession vi, ViConstString channelName, ViAttr attributeId, ViInt64 value);
	ViStatus _VI_FUNC niFgen_CheckAttributeViInt64 (ViSession vi, ViConstString channelName, ViAttr attributeId, ViInt64 value);
	ViStatus _VI_FUNC niFgen_GetAttributeViInt64 (ViSession vi, ViConstString channelName, ViAttr attributeId, ViInt64 *value);
Properties	P2P Enabled
	Destination Channels
	Endpoint Size
	Space Available in Endpoint
	Most Space Available in Endpoint
	Endpoint Count
	Data Transfer Permission Interval
	Data Transfer Permission Initial Credits
	Manual Configuration Enabled
	Data Transfer Permission Address
	Data Transfer Permission Address Type
	Endpoint Window Address
	Endpoint Window Address Type
	Endpoint Window Size
	Done Notification Address
	Done Notification Address Type
	Done Notification Value
	P2P Endpoint Fullness Start Trigger Level
Attributes	NIFGEN_ATTR_P2P_ENABLED
	NIFGEN_ATTR_P2P_DESTINATION_CHANNELS
	NIFGEN_ATTR_P2P_ENDPOINT_SIZE
	NIFGEN_ATTR_P2P_SPACE_AVAILABLE_IN_ENDPOINT
	NIFGEN_ATTR_P2P_MOST_SPACE_AVAILABLE_IN_ENDPOINT
	NIFGEN_ATTR_P2P_ENDPOINT_COUNT
	NIFGEN_ATTR_P2P_DATA_TRANSFER_PERMISSION_INTERVAL
	NIFGEN_ATTR_P2P_DATA_TRANSFER_PERMISSION_INITIAL_CREDITS
	NIFGEN_ATTR_P2P_MANUAL_CONFIGURATION_ENABLED
	NIFGEN_ATTR_P2P_DATA_TRANSFER_PERMISSION_ADDRESS
	NIFGEN_ATTR_P2P_DATA_TRANSFER_PERMISSION_ADDRESS_TYPE
	NIFGEN_ATTR_P2P_ENDPOINT_WINDOW_ADDRESS
	NIFGEN_ATTR_P2P_ENDPOINT_WINDOW_ADDRESS_TYPE
	NIFGEN_ATTR_P2P_ENDPOINT_WINDOW_SIZE
	NIFGEN_ATTR_P2P_DONE_NOTIFICATION_ADDRESS
	NIFGEN_ATTR_P2P_DONE_NOTIFICATION_ADDRESS_TYPE
	NIFGEN_ATTR_P2P_DONE_NOTIFICATION_VALUE
	NIFGEN_ATTR_P2P_ENDPOINT_FULLNESS_START_TRIGGER_LEVEL

Changes in NI-FGEN 2.7 from NI-FGEN 2.6.3

VI	niFgen Create Waveform (Complex WDT)
Function	ViStatus _VI_FUNC niFgen_CalAdjustADC (ViSession vi, ViConstString Channel_Name, ViInt32 Configuration, ViReal64 Voltages_Measured_Externally[], ViReal64 Voltages_Measured_With_CalADC[]);
Properties	Module Revision
	Compensate for Filter Group Delay
Attributes	NIFGEN_ATTR_MODULE_REVISION
	NIFGEN_ATTR_OSP_COMPENSATE_FOR_FILTER_GROUP_DELAY

Made the following function obsolete and moved it to niFgenObsolete.h:

• niFgen_CalAdjustCalADC
  

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.

If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.

For more information, refer to the following KnowledgeBase articles:

• For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
• For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
• To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
  

---

Important Information

Copyright

© 2007–2012 National Instruments. All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

End-User License Agreements and Third-Party Legal Notices

You can find end-user license agreements (EULAs) and third-party legal notices in the following locations:

• Notices are located in the \_Legal Information and directories.
• EULAs are located in the \Shared\MDF\EULAs directory.
• Review \_Legal Information.txt for information on including legal information in installers built with NI products.
  

Trademarks

CVI, LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments Corporation. Refer to the Trademark Information at ni.com/trademarks for other National Instruments trademarks.

The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries.

Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.