NI-FGEN 2.8.1 Driver Win32/64 Eng/Jpn NI-FGEN波形发生器仪器驱动程序2.8.1

石鑫华视觉 · 发表于 2021-1-17 23:25:36

注册登陆后可查看附件和大图，以及购买相关内容

您需要登录才可以下载或查看，没有账号？注册会员

x

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

NI-FGEN 2.8.1 Driver Win32/64 Eng/Jpn NI-FGEN波形发生器仪器驱动程序2.8.1

NI-FGEN
NI-FGEN为使用NI波形发生器产品的客户提供支持。
NI-FGEN是一款NI仪器驱动程序，可实现复杂测量解决方案所需的频率扫描和跳频、波形链接和循环以及频移键控(FSK)调制。 NI-FGEN驱动程序可兼容可互换虚拟仪器(IVI)，它具有一系列操作和属性，可以执行波形或信号发生器的功能，并提供交互式软件前面板和示例。

Win32/64Eng/Jpn
2.8.1
文件大小: 1756548497 字节 (1.64 GB)
修改日期: 2011-09-20 05:03
MD5: 5c404c5b189c44d090251d112eaa137a（官方正确）
SHA1: b12e7983e95c625e1d4350a17bf63792b333acef
SHA256: 5d30952145796cbc5dd43b941809b4fa80815a35e24116be1b88e5046d5f1b40
CRC32: e7c32320

百度网盘与NI官方下载地址：

FGEN2.8.1.txt (586 Bytes, 下载次数: 0, 售价: 10 元)

NI-FGEN Instrument Driver Readme

Version 2.8.1

Thank you for using NI-FGEN for Windows 7/Vista/XP. This file contains important information regarding NI-FGEN and is organized into the following sections:

New Features
Supported Hardware
System Requirements
Installed File Names and Locations
- Documentation
- The FGEN Soft Front Panel
Uninstalling/Modifying NI-FGEN
Upgrading Firmware
Known Issues
Bug Fixes
API Changes by Release
Notice Regarding Microsoft Silverlight Installation and Redistribution

New Features

NI-FGEN 2.8.1 includes the following new features:

Support for LabVIEW 2011 (32-bit) and LabVIEW 2011 (64-bit).
Support removed for LabVIEW 8.5.1.

NI-FGEN 2.8 includes the following new features:

Support for peer-to-peer streaming with the NI PXIe-5450 (module revision C only) and NI PXIe-5451.
New firmware for the NI PXIe-5450 and NI PXIe-5451. This firmware upgrade is required for all NI PXIe-5450 and NI PXIe-5451 devices. Refer to Upgrading Firmware for more information about this new firmware.
Support to reset writeable attributes to driver default values. In C, call the niFgen_ResetAttribute function. In LabVIEW, right-click the niFgen Property Node, and select Change To»Default Value.
Support for stream n script instruction.

NI-FGEN 2.7.4 includes the following new features:

Support for LabVIEW 2010 (32-bit) and LabVIEW 2010 (64-bit).
Fixed an issue in which a custom installer built on a 32-bit OS using LabVIEW, LabWindows™/CVI™, or NI TestStand does not deploy NI-FGEN or its dependent user applications on a 64-bit OS (ID 228650).
Support removed for LabVIEW 8.2.1.

NI-FGEN 2.7.2 includes the following new feature:

Fixed a fatal issue when upgrading NI-FGEN 2.7 when using Windows 7 (64-bit) and Windows Server 2008 R2.

NI-FGEN 2.7 includes the following new features:

Support for the NI PXIe-5451 400 MS/s, 16-bit dual-channel arbitrary waveform generator with onboard signal processing (OSP).
Support for LabVIEW 2009 (64-bit).
Support for 64-bit user mode.
Support for new NI PXIe-5442 and NI PXIe-5450 module revisions.
Support for Standard Function output mode on the NI PXIe-5450 module revision C.
New firmware for the NI PXIe-5442 and NI PXIe-5450. Refer to Upgrading Firmware for more information about this new firmware.
Support for wait with marker and break script instructions.
New VIs, properties, functions, and attributes.

NI-FGEN 2.6.3 includes the following new features:

Support for LabVIEW 2009 (32-bit).
Support removed for LabVIEW 7.1.1.

NI-FGEN 2.6.1 includes the following new features:

Japanese localization for driver, LabVIEW application programming interface (API), and documentation.
New firmware for the NI PXIe-5450 and NI PXIe-5442. Refer to Upgrading Firmware for more information about this new firmware.
Toggle markers are supported on the NI PXIe-5450.
Reorganized LabVIEW property node and CVI attribute tree.

NI-FGEN 2.6 includes the following new features:

Support for the NI PXIe-5450 dual-channel I/Q generator with OSP.
Improved scaled write (DBL) performance.
New VIs, properties, functions, and attributes.

NI-FGEN is compliant with the IviFgen Class Specification. For more information about this IVI Foundation class specification, visit www.ivifoundation.org.

Supported Hardware

The following table shows which hardware products are supported in this release under particular operating systems.

Hardware Product	Supported Under Windows 7	Supported Under Windows Vista	Supported Under Windows XP
NI PXI/PCI-5401 Function Generator	X	X	√
NI PXI/PCI-5402 Function Generator	√	√	√
NI PXI-5404 Frequency Generator	√1	√1	√
NI PXI/PCI-5406 Function Generator	√	√	√
NI PXI/PCI-5411 Arbitrary Waveform Generator	X	X	√
NI PXI/PCI-5412 Arbitrary Waveform Generator	√	√	√
NI PXI/PCI-5421 Arbitrary Waveform Generator	√	√	√
NI PXI-5422 Arbitrary Waveform Generator	√	√	√
NI PXI/PCI-5431 Video Signal Generator	X	X	√
NI PXI-5441 Arbitrary Waveform Generator with Onboard Signal Processing	√	√	√
NI PXIe–5442 Arbitrary Waveform Generator with Onboard Signal Processing	√	√	√
NI PXIe–5450 Dual-Channel I/Q Generator with Onboard Signal Processing	√	√	√
NI PXIe–5451 Dual-Channel Arbitrary Waveform Generator with Onboard Signal Processing	√	√	√
1 Windows 7/Vista support for the NI 5404 does not include support for external calibration. Perform external calibration for the NI 5404 on Windows XP operating systems.

Device-specific information about these signal generators is included in the NI Signal Generators Help file.

The following table shows which MXI connections are supported under particular operating systems.

MXI type	Supported Under Windows 7	Supported Under Windows Vista	Supported Under Windows XP
MXI-3	X	X	√
MXI-4	√	√	√
MXI-Express	√	√	√

System RequirementsSupported Operating Systems

Windows 7 (32-bit and 64-bit)
Windows Vista (32-bit and 64-bit)
Windows XP Service Pack 2 (32-bit)
Windows Server 2003 R2 (32-bit)
Windows Server 2008 R2 (64-bit)

Note NI-FGEN 2.8 does not support Windows Server non-R2 editions.

It is recommended that you have the most recent service pack for your operating system installed. Windows 2000 users must use NI-FGEN 2.7.3 or earlier.

Supported Real-Time Operating Environments

LabVIEW Real-Time Module
LabWindows/CVI Real-Time Module

Minimum System Requirements

Processor—Pentium III/Celeron 600 MHz or equivalent
RAM—
- Windows 7/Vista: 512 MB
- Windows XP: 128 MB

Microsoft Internet Explorer 5.5 or later
A screen resolution of 800 x 600 with 256 colors
Windows 7/Vista/XP, with all available critical updates and service packs

Recommended System

Processor—Pentium 4 or equivalent
RAM—
- Windows 7/Vista: 1 GB
- Windows XP: 256 MB
A screen resolution of 1024 x 768
Windows 7/Vista/XP, with all available critical updates and service packs

Application Development Software

NI LabVIEW 8.6.1, 2009 SP1 (32-bit), 2009 SP1 (64-bit), 2010 SP1 (32-bit), 2010 SP1 (64-bit), 2011 (32-bit), or 2011 (64-bit)
NI LabVIEW Real-Time Module 8.6.1, 2009 SP1, 2010 SP1, 2011 (no support for NI PXI/PCI-5401/5411/5431 devices)
LabWindows/CVI 8.5.1 or later
LabWindows/CVI Real-Time Module 9.0 or later (no support for NI PXI/PCI-5401/5411/5431 devices)

Note: If you are running your application on an RT target, at least 128 MB of memory is required.
Measurement Studio 6.0 or later
Microsoft Visual C++ (MSVC) 6.0 or later
Microsoft Visual Basic 6.0

Installed File Names and Locations

is an alias for the following National Instruments file folder location:
- Windows 7/Vista: Users\Public\Documents\National Instruments
- Windows XP: Documents and Settings\All Users\Shared Documents\National Instruments

is an alias for the following National Instruments file folder location:

Windows 7/Vista/XP 32-bit: Program Files\IVI Foundation\IVI\

Windows 7/Vista 64-bit: Program Files (x86)\IVI Foundation\IVI\

NOTES:	$(IVIROOTDIR32) is configured as an environment variable on the target system.
	If you upgraded an installation of IVI, your files may be in the following location: Windows 7/Vista/XP 32-bit: Program Files\IVI\ Windows 7/Vista 64-bit: Program Files (x86)\IVI\

is an alias for the following National Instruments file folder location:
- Windows 7/Vista 64-bit: Program Files\IVI Foundation\IVI\
  NOTE: $(IVIROOTDIR64) is configured as an environment variable on the target system.

File Locations

Item	Installed Location on Windows 7/Vista/XP
NI-FGEN	\Drivers\niFgen
NI-FGEN Function Panel	\Drivers\niFgen\nifgen.fp
NI-FGEN Examples	\NI-FGEN\Examples
NI-FGEN Header files	\Include
NI-FGEN Import Library files	\Lib
NI-FGEN DLL	\Bin

Additional File Locations for Windows 7/Vista 64-bit

Item	Installed Location on Windows 7/Vista 64-bit
NI-FGEN Function Panel	\Drivers\niFgen\nifgen.fp
NI-FGEN Header files	\Include
NI-FGEN Import Library files (64-bit)	\Lib_x64
NI-FGEN DLL (64-bit)	\Bin

Documentation

The following documents are installed with NI-FGEN and are available from Start»All Programs»National Instruments»NI-FGEN»Documentation:

NI Signal Generators Getting Started Guide
NI Signal Generators Help
Specifications
Calibration Procedures

Note To view many of these documents, you need to have Adobe Acrobat Reader installed. You can install the viewer from www.adobe.com/acrobat.

Visit ni.com/manuals to find the latest versions of product documentation.

The FGEN Soft Front Panel (SFP)

The FGEN Soft Front Panel (SFP) is accessible from Start»All Programs»National Instruments»NI-FGEN.

You can find example waveform and function files in the Program Files\IVI Foundation\IVI\Drivers\niFgen\Examples\Waveforms\ directory and in the Program Files (x86)\IVI Foundation\IVI\Drivers\niFgen\Examples\Waveforms\ directory on the 64-bit version of Windows 7/Vista. Refer to Waveform description.txt in the Waveforms folder for an explanation of the provided waveforms.

Uninstalling/Modifying NI-FGEN

For Windows XP, complete the following steps:

Launch the Control Panel by selecting Start»Control Panel.
Double-click Add/Remove Programs.
Select National Instruments Software.
Click Change/Remove.
Select NI-FGEN 2.8.1 from the dialog box that appears.
Click Remove to uninstall the product; click Modify to change the components that are installed.

For Windows 7/Vista, complete the following steps:

Launch the Control Panel by selecting Start»Control Panel.
Double-click Programs and Features.
Select National Instruments Software.
Click the Uninstall/Change button.
Select NI-FGEN 2.8.1 from the dialog box that appears.
Click Remove to uninstall the product; click Modify to change the components that are installed.

As part of the NI-FGEN 2.8.1 installation, the following list of software was installed. To completely remove NI-FGEN 2.8.1 from your system, you must remove all of these packages in addition to NI-FGEN.

NI Hierarchical Waveform Storage 1.4.9
NI IVI Compliance Package 4.4
NI Measurement & Automation Explorer 5.0
Traditional NI-DAQ 7.4.4 (Windows XP only)
NI-DAQmx 9.1.7
NI-VISA 5.0
NI Spy 2.7.2
NI-P2P 1.1.2

Caution Several of the software packages listed above are shared with other NI software packages. If you attempt to remove a piece of software that something else is dependent on, a message launches to warn you about the software dependencies. You can choose to either uninstall all of the software or to leave the shared software installed. If you choose to uninstall the shared software, some of your other NI software may no longer function correctly.

Upgrading Firmware

The NI PXIe-5442, NI PXIe-5450, and NI PXIe-5451 have upgradeable device firmware. It is highly encouraged and may be required that you upgrade the firmware on these devices; newer firmware contains new features and important bug fixes. To update the firmware, run the Firmware Updater application for your device (54xxFirmwareUpdater_X.Y.Z.exe, where 54xx is the name of the device and X.Y.Z is the firmware version) that is installed in the Program Files\IVI Foundation\IVI\Drivers\niFgen\ directory or the Program Files (x86)\IVI Foundation\IVI\Drivers\niFgen\ directory. This application upgrades your firmware to the latest available version that works with this driver. After the application runs, you are required to power down your computer and PXI Express chassis to complete the firmware update.

Known Issues

LabVIEW FPGA 2010 corrupts error reporting for NI-FGEN, and you may receive the following error message: Error information resources required by the driver could not be found on your system. Reinstall the driver, or contact National Instruments Technical support. Visit ni.com/kb and search for 5C1CGPJD for more information about how to correct error reporting behavior.
Using dynamic FPGA interfaces (also known as dynamic mode) in the LabVIEW FPGA Module is not supported when using peer-to-peer streaming. Dynamic mode is enabled by default in the LabVIEW FPGA Module 2010, so to disable Dynamic mode, complete the following steps:
- Place the Open FPGA VI Reference function on the LabVIEW block diagram.
- Right-click the function and select Configure Open FPGA VI Reference.
- Remove the checkmark from the Dynamic mode listbox.
When you run setup.exe to install the software from the CD, you are prompted to choose whether you want to always trust software from National Instruments. If you do not select this option, your installation may be interrupted by one or more Microsoft Windows security dialog boxes. However, if you run the installer in silent mode from the command line, you do not receive this prompt, and the installer automatically installs NI's Software Publisher Certificate to the your Windows Trusted Publisher Store. If you do not want to make this change to your Windows Trusted Publisher Store, do not choose this installation method.
Windows 7/Vista does not support Traditional DAQ (Legacy) devices. Traditional DAQ devices include the NI PXI/PCI-5401, NI PXI/PCI-5411, and NI PXI/PCI-5431. Simulating these devices is also not supported on Windows 7/Vista, using either the NI-FGEN or the FGEN Soft Front Panel. Simulating a device that is not supported on your operating system results in indeterminate behavior.
If you click a topic link in the NI-FGEN C Function Reference section of the NI Signal Generators Help, you cannot use the Back button in the HTML Help window toolbar to return to the original topic.
Installing NI-FGEN on a system with NI-DAQmx 7.0 or 7.1, NI-FGEN may return an error about NI-FGEN devices unable to start. To work around this issue, install NI-FGEN, reboot, and then repair NI-FGEN using the Microsoft Windows Control Panel.

Bug Fixes

The following items are fixed in NI-FGEN 2.8 from NI-FGEN 2.7.4

Bug ID	Fixed Issue
241656	Fixed firmware to synchronize power supplies for improved phase noise performance.
199899	Fixed an issue in which calling calibration utility functions in a normal NI-FGEN session affected output by disabling self-calibration constants.
182502	Fixed an issue in which running test panels for the NI PXIe-5450 and NI PXIe-5451 using the LabVIEW Real-Time Module did not write waveform data. This issue caused the output signal to be random.
183093	Fixed an issue in which waking from sleep mode could crash the operating system in some configurations, especially if the video, network, or other drivers were out of date.
187791	An issue was fixed in which LabVIEW 2009 (64-bit) could crash if you created more than one session using the same resource name. You must install LabVIEW 2009 SP1 (64-bit) for this bug fix.

The following items are fixed in NI-FGEN 2.7.4 from NI-FGEN 2.7.3

Bug ID	Fixed Issue
228650	Fixed an issue in which a custom installer built on a 32-bit OS using LabVIEW, LabWindows/CVI, or NI TestStand does not deploy NI-FGEN or its dependent user applications on a 64-bit OS.

The following items are fixed in NI-FGEN 2.7.3 from NI-FGEN 2.7.2

Bug ID	Fixed Issue
229602	Fixed an issue with clock configuration that can cause memory corruption or blue screen with certain NI PXIe-5450 devices.
212209	Fixed an incorrect calibration DAC setting that could cause self-calibration to fail on the NI PXIe-5451.

The following items are fixed in NI-FGEN 2.7.2 from NI-FGEN 2.7

Bug ID	Fixed Issue
209051	Fixed an issue in which the installer did not stop service nidevldu before upgrading binaries.

The following items are fixed in NI-FGEN 2.7 from NI-FGEN 2.6.3

Bug ID	Fixed Issue
179935	Fixed a streaming issue on the NI PXIe-5442/5450. Streaming with certain combinations of chassis and controllers caused the device to return an invalid thermal error and detach itself from the system. You must upgrade your firmware for this solution.
157714	Fixed a memory leak that occurred when a session was opened and closed dynamically using VI server on LabVIEW Real-Time targets.
118345	Toggle markers are now allowed below 200 MS/s sample rates on the NI PXIe-5450.
39796	An error is now returned when PXI_STAR is used as a trigger source for the NI PXIe-5442. This configuration is not supported.
118500	The NI PXIe-5450 now supports the Oscillator Phase DAC property and NIFGEN_ATTR_OSCILLATOR_PHASE_DAC_VALUE attribute for external Sample clocks.

The following items are fixed in NI-FGEN 2.6.1 from NI-FGEN 2.6

Bug ID	Fixed Issue
119090	Fixed an issue that prevented using all device memory for a single-channel generation on channel 1.
120854	Fixed a memory leak that occurred when writing less than 128 samples at a time.
118735	Fixed an issue that caused the NI 5450 and NI 5442 to skip samples when responding to a Script trigger.
120220	Fixed a 16-sample data corruption issue that occurred when using more than half of the device memory on the NI 5442 and NI 5450.
133813	Alignment of markers and other events to the analog output has been improved slightly within the existing specifications. The default unit for setting event delays on the NI 5450 is now samples, as it is on other signal generators.

The following items are fixed in NI-FGEN 2.6 from NI-FGEN 2.5.2

Bug ID	Fixed Issue
104259	Fixed an issue that incorrectly allowed users to write scripts while in the Generating state.
103305	Decreased minimum frequency step duration in Frequency List output mode for the NI 5402, NI 5406, NI 5441, and NI 5442 devices. The on-the-fly OSP carrier frequency change time for the NI 5441 and NI 5442 devices was also decreased.
95208	Fixed an issue that caused sine waves to have incorrect amplitudes when an offset was applied and flatness correction was enabled on the NI 5402, NI 5406, NI 5441, and NI 5442 devices.
39673	Improved streaming ease-of-use by automatically wrapping writes to streaming waveforms that cross the waveform boundary.

The following items are fixed in NI-FGEN 2.5.1 from NI-FGEN 2.5

Bug ID	Fixed Issue
4E094973	Fixed a streaming issue on the NI PXIe-5442. Streaming data to large waveforms that cross the midpoint of the device onboard memory may cause glitches to appear in the generated signal.
4DQCUIFH	Improved internal clocking reliability for the NI PXIe-5442.
4DJH2HJR, 4CQDTAAD	Fixed several issues with NI-FGEN for LabVIEW Real-Time systems. Upgrading from a previous version of NI-FGEN to NI-FGEN 2.5 could cause you to be unable to download the software to the target. Additionally, some devices may not have been usable with the LabVIEW Real-Time Module.

API Changes by Release

Changes in NI-FGEN 2.8 from NI-FGEN 2.7.4

VIs	niFgen Get Stream Endpoint Handle
	niFgen Manual Enable P2P Stream
	niFgen Configure P2P Endpoint Fullness Start Trigger
	niFgen Write P2P Endpoint I16
Functions	ViStatus _VI_FUNC niFgen_GetStreamEndpointHandle (ViSession vi, ViConstString streamEndpoint, ViInt32* readerHandle);
	ViStatus _VI_FUNC niFgen_ManualEnableP2PStream (ViSession vi, ViConstString endpointName);
	ViStatus _VI_FUNC niFgen_ConfigureP2PEndpointFullnessStartTrigger (ViSession vi, ViInt32 p2pEndpointFullnessLevel);
	ViStatus _VI_FUNC niFgen_WriteP2PEndpointI16 (ViSession vi, ViConstString endpointName, ViInt32 numberOfSamples, ViInt16 endpointData[]);
	ViStatus _VI_FUNC niFgen_ResetAttribute (ViSession vi, ViConstString channelName, ViAttr attributeId);
	ViStatus _VI_FUNC niFgen_SetAttributeViInt64 (ViSession vi, ViConstString channelName, ViAttr attributeId, ViInt64 value);
	ViStatus _VI_FUNC niFgen_CheckAttributeViInt64 (ViSession vi, ViConstString channelName, ViAttr attributeId, ViInt64 value);
	ViStatus _VI_FUNC niFgen_GetAttributeViInt64 (ViSession vi, ViConstString channelName, ViAttr attributeId, ViInt64 *value);
Properties	P2P Enabled
	Destination Channels
	Endpoint Size
	Space Available in Endpoint
	Most Space Available in Endpoint
	Endpoint Count
	Data Transfer Permission Interval
	Data Transfer Permission Initial Credits
	Manual Configuration Enabled
	Data Transfer Permission Address
	Data Transfer Permission Address Type
	Endpoint Window Address
	Endpoint Window Address Type
	Endpoint Window Size
	Done Notification Address
	Done Notification Address Type
	Done Notification Value
	P2P Endpoint Fullness Start Trigger Level
Attributes	NIFGEN_ATTR_P2P_ENABLED
	NIFGEN_ATTR_P2P_DESTINATION_CHANNELS
	NIFGEN_ATTR_P2P_ENDPOINT_SIZE
	NIFGEN_ATTR_P2P_SPACE_AVAILABLE_IN_ENDPOINT
	NIFGEN_ATTR_P2P_MOST_SPACE_AVAILABLE_IN_ENDPOINT
	NIFGEN_ATTR_P2P_ENDPOINT_COUNT
	NIFGEN_ATTR_P2P_DATA_TRANSFER_PERMISSION_INTERVAL
	NIFGEN_ATTR_P2P_DATA_TRANSFER_PERMISSION_INITIAL_CREDITS
	NIFGEN_ATTR_P2P_MANUAL_CONFIGURATION_ENABLED
	NIFGEN_ATTR_P2P_DATA_TRANSFER_PERMISSION_ADDRESS
	NIFGEN_ATTR_P2P_DATA_TRANSFER_PERMISSION_ADDRESS_TYPE
	NIFGEN_ATTR_P2P_ENDPOINT_WINDOW_ADDRESS
	NIFGEN_ATTR_P2P_ENDPOINT_WINDOW_ADDRESS_TYPE
	NIFGEN_ATTR_P2P_ENDPOINT_WINDOW_SIZE
	NIFGEN_ATTR_P2P_DONE_NOTIFICATION_ADDRESS
	NIFGEN_ATTR_P2P_DONE_NOTIFICATION_ADDRESS_TYPE
	NIFGEN_ATTR_P2P_DONE_NOTIFICATION_VALUE
	NIFGEN_ATTR_P2P_ENDPOINT_FULLNESS_START_TRIGGER_LEVEL

Changes in NI-FGEN 2.7 from NI-FGEN 2.6.3

VI	niFgen Create Waveform (Complex WDT)
Function	ViStatus _VI_FUNC niFgen_CalAdjustADC (ViSession vi, ViConstString Channel_Name, ViInt32 Configuration, ViReal64 Voltages_Measured_Externally[], ViReal64 Voltages_Measured_With_CalADC[]);
Properties	Module Revision
Properties	Compensate for Filter Group Delay
Attributes	NIFGEN_ATTR_MODULE_REVISION
Attributes	NIFGEN_ATTR_OSP_COMPENSATE_FOR_FILTER_GROUP_DELAY

Made the following function obsolete and moved it to niFgenObsolete.h:

niFgen_CalAdjustCalADC

Changes in NI-FGEN 2.6 from NI-FGEN 2.5.2

VI	niFgen Configure Channels
Function	ViStatus _VI_FUNC niFgen_ConfigureChannels(ViSession vi, ViConstString channels);
Properties	Channel Delay
	Common Mode Offset
	Exported Sample Clock Timebase Output Terminal
	External Sample Clock Multiplier
	Frequency Shift
	Idle Behavior
	Idle Value
	Maximum Bandwidth
	Maximum In-Flight Read Requests
	OSP Mode
	PCI DMA Optimizations Enabled
	Preferred Packet Size
	Sample Clock Timebase Rate
	Sample Clock Timebase Source
	Terminal Configuration
	Wait Behavior
	Wait Value
Attributes	NIFGEN_ATTR_CHANNEL_DELAY
	NIFGEN_ATTR_COMMON_MODE_OFFSET
	NIFGEN_ATTR_DATA_TRANSFER_MAXIMUM_BANDWIDTH
	NIFGEN_ATTR_DATA_TRANSFER_MAXIMUM_IN_FLIGHT_READS
	NIFGEN_ATTR_DATA_TRANSFER_PCI_DMA_OPTIMIZATIONS_ENABLED
	NIFGEN_ATTR_DATA_TRANSFER_PREFERRED_PACKET_SIZE
	NIFGEN_ATTR_EXPORTED_SAMPLE_CLOCK_TIMEBASE_OUTPUT_TERMINAL
	NIFGEN_ATTR_EXTERNAL_SAMPLE_CLOCK_MULTIPLIER
	NIFGEN_ATTR_IDLE_BEHAVIOR
	NIFGEN_ATTR_IDLE_VALUE
	NIFGEN_ATTR_OSP_FREQUENCY_SHIFT
	NIFGEN_ATTR_OSP_MODE
	NIFGEN_ATTR_SAMPLE_CLOCK_TIMEBASE_RATE
	NIFGEN_ATTR_SAMPLE_CLOCK_TIMEBASE_SOURCE
	NIFGEN_ATTR_TERMINAL_CONFIGURATION
	NIFGEN_ATTR_WAIT_BEHAVIOR
	NIFGEN_ATTR_WAIT_VALUE

Changes in NI-FGEN 2.5 from NI-FGEN 2.4.6

Properties	Done Event Delay
	Marker Event Delay
	Started Event Delay
	Done Event Delay Units
	Marker Event Delay Units
	Started Event Delay Units
Attributes	NIFGEN_ATTR_DONE_EVENT_DELAY
	NIFGEN_ATTR_MARKER_EVENT_DELAY
	NIFGEN_ATTR_STARTED_EVENT_DELAY
	NIFGEN_ATTR_DONE_EVENT_DELAY_UNITS
	NIFGEN_ATTR_MARKER_EVENT_DELAY_UNITS
	NIFGEN_ATTR_STARTED_EVENT_DELAY_UNITS

Changes in NI-FGEN 2.4 from NI-FGEN 2.3

Attributes	NIFGEN_ATTR_STREAMING_WAVEFORM_HANDLE
	NIFGEN_ATTR_ARB_MARKER_POSITION
	NIFGEN_ATTR_ARB_REPEAT_COUNT
	NIFGEN_ATTR_STREAMING_SPACE_AVAILABLE_IN_WAVEFORM
	NIFGEN_ATTR_SAMPLE_CLOCK_SOURCE
	NIFGEN_ATTR_REFERENCE_CLOCK_SOURCE
	NIFGEN_ATTR_FLATNESS_CORRECTION_ENABLED
	NIFGEN_ATTR_SCRIPT_TO_GENERATE
	NIFGEN_ATTR_MARKER_EVENTS_COUNT
	NIFGEN_ATTR_SCRIPT_TRIGGERS_COUNT
	NIFGEN_ATTR_DATA_MARKER_EVENTS_COUNT
	NIFGEN_ATTR_STREAMING_WAVEFORM_NAME
	NIFGEN_ATTR_SCRIPT_TRIGGER_TYPE
	NIFGEN_ATTR_DIGITAL_EDGE_SCRIPT_TRIGGER_SOURCE
	NIFGEN_ATTR_DIGITAL_EDGE_SCRIPT_TRIGGER_EDGE
	NIFGEN_ATTR_DIGITAL_LEVEL_SCRIPT_TRIGGER_SOURCE
	NIFGEN_ATTR_DIGITAL_LEVEL_SCRIPT_TRIGGER_ACTIVE_LEVEL
	NIFGEN_ATTR_EXPORTED_SCRIPT_TRIGGER_OUTPUT_TERMINAL
	NIFGEN_ATTR_START_TRIGGER_TYPE
	NIFGEN_ATTR_DIGITAL_EDGE_START_TRIGGER_SOURCE
	NIFGEN_ATTR_DIGITAL_EDGE_TRIGGER_EDGE
	NIFGEN_ATTR_EXPORTED_START_TRIGGER_OUTPUT_TERMINAL
	NIFGEN_ATTR_READY_FOR_START_EVENT_OUTPUT_TERMINAL
	NIFGEN_ATTR_READY_FOR_START_EVENT_LEVEL_ACTIVE_LEVEL
	NIFGEN_ATTR_MARKER_EVENT_OUTPUT_TERMINAL
	NIFGEN_ATTR_MARKER_EVENT_PULSE_POLARITY
	NIFGEN_ATTR_MARKER_EVENT_PULSE_WIDTH
	NIFGEN_ATTR_MARKER_EVENT_PULSE_WIDTH_UNITS
	NIFGEN_ATTR_MARKER_EVENT_OUTPUT_BEHAVIOR
	NIFGEN_ATTR_MARKER_EVENT_TOGGLE_INITIAL_STATE
	NIFGEN_ATTR_STARTED_EVENT_OUTPUT_TERMINAL
	NIFGEN_ATTR_STARTED_EVENT_LEVEL_ACTIVE_LEVEL
	NIFGEN_ATTR_STARTED_EVENT_PULSE_POLARITY
	NIFGEN_ATTR_STARTED_EVENT_OUTPUT_BEHAVIOR
	NIFGEN_ATTR_STARTED_EVENT_PULSE_WIDTH_UNITS
	NIFGEN_ATTR_STARTED_EVENT_PULSE_WIDTH
	NIFGEN_ATTR_DONE_EVENT_OUTPUT_TERMINAL
	NIFGEN_ATTR_DONE_EVENT_LEVEL_ACTIVE_LEVEL
	NIFGEN_ATTR_DONE_EVENT_PULSE_POLARITY
	NIFGEN_ATTR_DONE_EVENT_OUTPUT_BEHAVIOR
	NIFGEN_ATTR_DONE_EVENT_PULSE_WIDTH_UNITS
	NIFGEN_ATTR_DONE_EVENT_PULSE_WIDTH
	NIFGEN_ATTR_DATA_MARKER_EVENT_DATA_BIT_NUMBER
	NIFGEN_ATTR_DATA_MARKER_EVENT_LEVEL_POLARITY
	NIFGEN_ATTR_DATA_MARKER_EVENT_OUTPUT_TERMINAL
	NIFGEN_ATTR_ALL_MARKER_EVENTS_LIVE_STATUS
	NIFGEN_ATTR_MARKER_EVENT_LIVE_STATUS
	NIFGEN_ATTR_READY_FOR_START_EVENT_LIVE_STATUS
	NIFGEN_ATTR_ALL_MARKER_EVENTS_LATCHED_STATUS
	NIFGEN_ATTR_MARKER_EVENT_LATCHED_STATUS
	NIFGEN_ATTR_DONE_EVENT_LATCHED_STATUS
	NIFGEN_ATTR_STARTED_EVENT_LATCHED_STATUS
	NIFGEN_ATTR_EXPORTED_SAMPLE_CLOCK_OUTPUT_TERMINAL
	NIFGEN_ATTR_EXPORTED_REFERENCE_CLOCK_OUTPUT_TERMINAL
	NIFGEN_ATTR_EXPORTED_ONBOARD_REFERENCE_CLOCK_OUTPUT_TERMINAL
	NIFGEN_ATTR_EXPORTED_SAMPLE_CLOCK_TIMEBASE_OUTPUT_TERMINAL
	NIFGEN_ATTR_SYNC_OUT_OUTPUT_TERMINAL
	NIFGEN_ATTR_DIRECT_DMA_ENABLE
	NIFGEN_ATTR_DIRECT_DMA_WINDOW_SIZE
	NIFGEN_ATTR_DIRECT_DMA_WINDOW_ADDRESS
Functions	ViStatus _VI_FUNC niFgen_AllocateNamedWaveform(ViSession vi, ViConstString channelName, ViConstString wfmName, ViInt32 numberOfSamples);
	ViStatus _VI_FUNC niFgen_SetNamedWaveformNextWritePosition(ViSession vi, ViConstString channelName, ViConstString wfmName, ViInt32 relativeTo, ViInt32 offset);
	ViStatus _VI_FUNC niFgen_WriteNamedWaveformF64(ViSession vi, ViConstString channelName, ViConstString wfmName, ViInt32 numberOfSamples, ViReal64 wfmData[]);
	ViStatus _VI_FUNC niFgen_WriteNamedWaveformI16(ViSession vi, ViConstString channelName, ViConstString wfmName, ViInt32 numberOfSamples, ViInt16 wfmData[]);
	ViStatus _VI_FUNC niFgen_WriteNamedWaveformComplexF64(ViSession vi, ViConstString channelName, ViConstString wfmName, ViInt32 numberOfSamples, NIComplexNumber wfmData[]);
	ViStatus _VI_FUNC niFgen_WriteNamedWaveformComplexI16(ViSession vi, ViConstString channelName, ViConstString wfmName, ViInt32 numberOfSamples, NIComplexI16 wfmData[]);
	ViStatus _VI_FUNC niFgen_DeleteNamedWaveform(ViSession vi, ViConstString channelName, ViConstString wfmName);
	ViStatus _VI_FUNC niFgen_WriteScript(ViSession vi, ViConstString channelName, ViConstString script);
	ViStatus _VI_FUNC niFgen_DeleteScript(ViSession vi, ViConstString channelName, ViConstString scriptName);
	ViStatus _VI_FUNC niFgen_ExportSignal(ViSession vi, ViInt32 signal, ViConstString signalIdentifier, ViConstString outputTerminal);
	ViStatus _VI_FUNC niFgen_SendSoftwareEdgeTrigger(ViSession vi, ViInt32 triggerName, ViConstString triggerIdentifier);
	ViStatus _VI_FUNC niFgen_ConfigureDigitalEdgeStartTrigger(ViSession vi, ViConstString source, ViInt32 edge);
	ViStatus _VI_FUNC niFgen_ConfigureSoftwareEdgeStartTrigger(ViSession vi);
	ViStatus _VI_FUNC niFgen_DisableStartTrigger(ViSession vi);
	ViStatus _VI_FUNC niFgen_ConfigureDigitalEdgeScriptTrigger(ViSession vi, ViConstString triggerID, ViConstString source, ViInt32 edge);
	ViStatus _VI_FUNC niFgen_ConfigureDigitalLevelScriptTrigger(ViSession vi, ViConstString triggerID, ViConstString source, ViInt32 level);
	ViStatus _VI_FUNC niFgen_ConfigureSoftwareEdgeScriptTrigger(ViSession vi, ViConstString triggerID);
	ViStatus _VI_FUNC niFgen_DisableScriptTrigger(ViSession vi, ViConstString triggerID);
	ViStatus _VI_FUNC niFgen_WriteComplexBinary16Waveform(ViSession vi, ViConstString channelName, ViInt32 waveformHandle, ViInt32 numberOfSamples, NIComplexI16 wfmData[]);
	ViStatus _VI_FUNC niFgen_InitializeFlatnessCalibration(ViSession vi);
	ViStatus _VI_FUNC niFgen_CalAdjustFlatness(ViSession vi, ViConstString channelName, ViInt32 configuration, ViReal64 requestedAmplitude, ViReal64* frequencies, ViReal64* measuredAmplitudes, ViInt32 numberOfMeasurements);
	ViStatus _VI_FUNC niFgen_ConfigureSampleClockSource(ViSession vi, ViConstString sampleClockSource);
Values	Output Mode: NIFGEN_VAL_OUTPUT_SCRIPT
New attributes and functions: See niFgen.h file for values supported by new attributes and functions

Made the following VIs obsolete and moved them to niFgenObsolete_2_4.llb:

niFgen Configure Ref Clock Frequency VI
niFgen Configure Ref Clock Source VI
niFgen Configure Trigger VI
niFgen Configure Update Clock Source VI
niFgen Send Software Trigger VI

Made the following functions obsolete and moved them to niFgenObsolete.h:

niFgen_ConfigureReferenceClockFrequency
niFgen_ConfigureReferenceClockSource
niFgen_ConfigureTriggerSource
niFgen_ConfigureUpdateClockSource
niFgen_SendSoftwareTrigger

Made the niFgen_ComplexF64 type obsolete and moved it to niFgenObsolete.h.

Changes in NI-FGEN 2.3 from NI-FGEN 2.2

Attributes	NIFGEN_ATTR_DIGITAL_GAIN
	NIFGEN_ATTR_OSP_ENABLED
	NIFGEN_ATTR_OSP_DATA_PROCESSING_MODE
	NIFGEN_ATTR_OSP_IQ_RATE
	NIFGEN_ATTR_OSP_CARRIER_ENABLED
	NIFGEN_ATTR_OSP_CARRIER_FREQUENCY
	NIFGEN_ATTR_OSP_CARRIER_PHASE_I
	NIFGEN_ATTR_OSP_CARRIER_PHASE_Q
	NIFGEN_ATTR_OSP_FIR_FILTER_TYPE
	NIFGEN_ATTR_OSP_FIR_FILTER_ENABLED
	NIFGEN_ATTR_OSP_FIR_FILTER_INTERPOLATION
	NIFGEN_ATTR_OSP_CIC_FILTER_ENABLED
	NIFGEN_ATTR_OSP_CIC_FILTER_INTERPOLATION
	NIFGEN_ATTR_OSP_FIR_FILTER_ROOT_RAISED_COSINE_ALPHA
	NIFGEN_ATTR_OSP_FIR_FILTER_RAISED_COSINE_ALPHA
	NIFGEN_ATTR_OSP_FIR_FILTER_FLAT_PASSBAND
	NIFGEN_ATTR_OSP_FIR_FILTER_GAUSSIAN_BT
	NIFGEN_ATTR_OSP_CIC_FILTER_GAIN
	NIFGEN_ATTR_OSP_PRE_FILTER_GAIN_I
	NIFGEN_ATTR_OSP_PRE_FILTER_GAIN_Q
	NIFGEN_ATTR_OSP_PRE_FILTER_OFFSET_I
	NIFGEN_ATTR_OSP_PRE_FILTER_OFFSET_Q
	NIFGEN_ATTR_OSP_OVERFLOW_ERROR_REPORTING
	NIFGEN_ATTR_OSP_OVERFLOW_STATUS
Functions	ViStatus niFgen_ConfigureCustomFIRFilterCoefficients (ViSession vi, ViConstString channelName, ViInt32 numberOfCoefficients, ViReal64* coefficients)
	ViStatus niFgen_GetFIRFilterCoefficients (ViSession vi, ViConstString channelName, ViInt32 arraySize, ViReal64* coefficients, ViInt32* numberOfCoefficientsRead)
	ViStatus niFgen_CreateWaveformComplexF64 (ViSession vi, ViConstString channelName, ViInt32 numberOfSamples, niFgen_ComplexF64 wfmData[], ViInt32 *wfmHandle)
	ViStatus niFgen_WriteWaveformComplexF6 (ViSession vi, ViConstString channelName, ViInt32 numberOfSamples, niFgen_ComplexF64 data[], ViInt32 wfmHandle)
Values	OSP Data Processing Mode: NIFGEN_VAL_OSP_REAL NIFGEN_VAL_OSP_COMPLEX
	OSP FIR Filter Type: NIFGEN_VAL_OSP_FLAT NIFGEN_VAL_OSP_RAISED_COSINE NIFGEN_VAL_OSP_ROOT_RAISED_COSINE NIFGEN_VAL_OSP_GAUSSIAN NIFGEN_VAL_OSP_CUSTOM
	OSP Overflow Error Reporting: NIFGEN_VAL_ERROR_REPORTING_ERROR NIFGEN_VAL_ERROR_REPORTING_DISABLED
	OSP Overflow Status: NIFGEN_VAL_OSP_OVERFLOW_NONE NIFGEN_VAL_OSP_OVERFLOW_PRE_FILTER_GAIN_I NIFGEN_VAL_OSP_OVERFLOW_PRE_FILTER_GAIN_Q NIFGEN_VAL_OSP_OVERFLOW_PRE_FILTER_OFFSET_I NIFGEN_VAL_OSP_OVERFLOW_PRE_FILTER_OFFSET_Q NIFGEN_VAL_OSP_OVERFLOW_FIR_FILTER_I NIFGEN_VAL_OSP_OVERFLOW_FIR_FILTER_Q NIFGEN_VAL_OSP_OVERFLOW_CIC_FILTER_I NIFGEN_VAL_OSP_OVERFLOW_CIC_FILTER_Q NIFGEN_VAL_OSP_OVERFLOW_COMPLEX_DATA

Notice Regarding Microsoft Silverlight Installation and RedistributionInstalling Microsoft Silverlight

Some NI components require Microsoft Silverlight. If you do not have Silverlight installed on your computer, but you do have Internet access, you can download the installer from Microsoft at http://www.microsoft.com/silverlight/. If you do not have Internet access, you can install Silverlight from this NI distribution media.

Using Microsoft Silverlight

You may not use any H.264/MPEG-4 AVC and/or VC-1 technology or codecs included in or with Microsoft Silverlight software which may be provided by NI as Third Party Software, including for the purpose of encoding or decoding video in compliance with, or making use of, the H.264/AVC visual standard or the VC-1 video standard.

Redistribution of Microsoft Silverlight

If you create and distribute software applications that contain NI components that also use Microsoft Silverlight, you may be authorized to include Silverlight in installers or on physical media as long as you comply with certain requirements. Refer to the notice.txt file in the \_Legal Information\Microsoft Silverlight 4.0 directory or the NI standard End User License Agreement (EULA) located in the \Common\MDF\EULADepot\NIReleased directory for more information.

Copyright

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

Trademarks

CVI, LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments Corporation. Refer to the Trademark Information at ni.com/trademarks for other National Instruments trademarks.

Patents

For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.

账号		自动登录	找回密码
密码			注册会员

[NI驱动程序] NI-FGEN 2.8.1 Driver Win32/64 Eng/Jpn NI-FGEN波形发生器仪器驱动程序2.8.1

注册登陆后可查看附件和大图，以及购买相关内容

相关帖子

客服中心

电话咨询

投诉建议