NI-XNET 1.0 Driver Win32Eng/Ger/Jpn NI-XNET仪器驱动程序1.0下载

石鑫华视觉

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

NI-XNET 1.0 Driver Win32Eng/Ger/Jpn NI-XNET仪器驱动程序1.0下载

NI-XNET
NI-XNET为配置、开发和调试应用程序提供支持，适用于汽车以太网、CAN、LIN和FlexRay网络的原型验证、仿真和测试。
NI-XNET是一个NI仪器驱动程序，具有一组易用的常见功能，用于读写PXI、PCI、NI CompactDAQ和NI CompactRIO等不同平台的汽车以太网、CANI、LIN和FlexRay帧和信号。NI-XNET CAN、LIN和FlexRay接口经优化，适合需要对数百个CAN帧和信号进行高速实时操作的应用，如硬件在环仿真、快速控制原型、总线监控和自动化控制等。

1.0
文件大小: 278588810 字节 (265.68 MB)
修改日期: 2019-06-25 02:42
MD5: 3ca831a452cbef3a83449539adbebe4d（官方正确）
SHA1: 1758e4fb9d80f130581a581fae14d60d4ea1e6b8
SHA256: 496331267507747353cbd56e142cb5065d3455bd979e58cf59f215d5ac5a67b2
CRC32: 5d59bb55

NI-XNET1.0.txt (277 Bytes, 下载次数: 0, 售价: 10 元)

2020-10-20 22:21 上传

点击文件名下载附件

NI-XNET 1.0 Readme

August 2009

ni.com/support

This file contains information about the NI-XNET software for Windows Vista/XP and LabVIEW™ Real-Time (RT). Information in this file is organized in the following sections:

• Documentation
• Supported Platforms
• Installing NI-XNET 1.0
• Additional Programming Topics
  

---

Documentation

The XNET Software and Hardware Installation Guide included with the NI-XNET CD includes instructions for installing National Instruments CAN and FlexRay hardware and software.

The NI-XNET Hardware and Software Help is the primary document for NI XNET products. This help includes an introduction to CAN and FlexRay, specifications for hardware, information about how to get started with application development, and a complete reference for all NI-XNET functions.

Open the help from Start»All Programs»National Instruments»NI-XNET.

Links to the NI-XNET Hardware and Software Help are in the online help for each NI-XNET function within the National Instruments LabVIEW and LabWindows™/CVI™ development environments.

Online help for the NI-XNET features within Measurement & Automation Explorer (MAX) is in the MAX Help Topics menu. The MAX Help Topics menu for NI-XNET also includes a link to the NI-XNET Hardware and Software Help.

Back to Top

---

Installing NI-XNET 1.0

Before installing the NI-XNET software, log on as Administrator or as a user with Administrator privileges. The NI-XNET software setup program must have Administrator privileges because the program modifies the configuration registry of your system. Complete the following steps to install the NI-XNET software.

• Insert the NI-XNET software CD into your CD-ROM drive. The installer launches if your CD-ROM drive plays data CDs automatically. If the installer does not launch automatically, navigate to the CD using Windows Explorer and launch the autorun.exe file from your NI-XNET software CD.
• The installation wizard guides you through the necessary steps to install the NI-XNET software. You can go back and change values where appropriate by clicking the Back button. You can exit the setup where appropriate by clicking Cancel.
• When the installation is complete, click Finish.
  

Installing NI-XNET Silently

You can control programmatically which features in the NI-XNET distribution to enable or disable for installation. You therefore can install a subset of the NI-XNET distribution silently. Refer to the template_spec.txt file in the Specfiles directory on the NI-XNET CD for more information about installing NI-XNET silently and selecting which features to install automatically.

Back to Top

---

Supported PlatformsSupported Operating Systems

You must install and run this version of the NI-XNET software on the following operating systems:

• Windows XP 32-bit
• Windows Vista (32-bit and 64-bit)
  For more information about using National Instruments hardware and software products with Windows Vista, visit ni.com/vista.
  

Supported Hardware

This version of the NI-XNET software supports the following National Instruments hardware products on Windows and LabVIEW RT (PXI hardware only):

• NI PCI-8511 (Low-Speed/Fault-Tolerant CAN)
• NI PCI-8512 (High-Speed CAN)
• NI PCI-8513 (Software-Selectable HS/LS/SW CAN)
• NI PCI-8517 (FlexRay)
• NI PXI-8511 (Low-Speed/Fault-Tolerant CAN)
• NI PXI-8512 (High-Speed CAN)
• NI PXI-8513 (Software-Selectable HS/LS/SW CAN)
• NI PXI-8517 (FlexRay)
  

The NI-XNET software supports only National Instruments CAN and FlexRay hardware products. For information about software for CAN products from other vendors, refer to the documentation you received with those products.

Supported Development Environments

This version of the NI-XNET software supports the following development environments:

• LabVIEW 8.5, 8.6, and LabVIEW 2009 (32-bit)
• LabVIEW Real-Time (RT) 8.5, 8.6, and 2009
• LabWindows/CVI 8.5 and higher
• Microsoft Visual C/C++ 6.0
  

Back to Top

---

Additional Programming TopicsNI-CAN Compatibility

If you intend to use the NI-CAN API with your NI-XNET hardware, refer to the NI-XNET Compatibility for NI-CAN appendix in the NI-CAN Hardware and Software Manual.

Back to Top

---

© 2009 National Instruments Corporation. All rights reserved.