视觉论坛VISIONBBS|视觉之家VISIONHOME微信公众号:石鑫华视觉网

 找回密码
 注册会员
查看: 131|回复: 0

[NI驱动软件] NI-488.2 21.5 Driver Linux64Eng NI IEEE488.2仪器驱动21.5 Linux系统在线安装版下载

[复制链接]
  • TA的每日心情
    无聊
    昨天 11:01
  • 签到天数: 2528 天

    连续签到: 27 天

    [LV.Master]2000FPS

    发表于 2022-3-1 10:58:08 | 显示全部楼层 |阅读模式

    注册登陆后可查看附件和大图,以及购买相关内容

    您需要 登录 才可以下载或查看,没有账号?注册会员

    x
    Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件、模块、工具包、驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Activator来激活,以下链接可下载:
    NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
    https://pcmv.cn/thread-490-1-1.html

    视觉论坛的各种资源,除了视觉相关的模块有使用外,大部分的都不会使用,所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址,那视觉论坛也没有办法,只能尝试使用百度网盘地址下载;如果百度网盘的下载地址失效过期,可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好,有些时候速度很慢或大的资源下载很容易出错,这样会造成安装过程各种类型报错而无法安装。建议在下载完成后,对下载资源做校验和验证(NI一般会提供MD5或SHA256等),与官方或视觉论坛提供的校验和对比,一致就可以安装,如果不一致,则需要重新下载。视觉论坛早期下载的资源,那时候NI没有这么多限制,基本上都是正常下载的资源;后期下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘,所以百度网盘的资源基本上是正确的。校验和工具下载地址:
    文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
    https://pcmv.cn/thread-26524-1-1.html

    NI-488.2 21.5 Driver Linux64Eng NI IEEE488.2仪器驱动21.5 Linux系统在线安装版下载

    NI-488.2为使用NI GPIB控制器和带有GPIB端口的NI嵌入式控制器的客户提供支持。
    NI-488.2仪器驱动程序包含了几个实用程序,用于应用程序开发和调试。NI-488.2包含了可自动处理所有总线管理的高级命令,因而用户就无需了解GPIB硬件产品或IEEE 488.2协议的编程细节。为了提供最大灵活性和功能,NI-488.2还包含了底层命令。
    20.0版自述文件有中文版的,官方说明中也说支持中文, 日语, 英文, 韩语等,但是翻看资源包的Documents目录下,只有英文和日文的,估计仍然是只有安装界面与自述文件有中文,内在的资源仍然是没有中文化的。

    NI-488.2 21.5 Linux
    发布日期:
    22-1-28
    包含的版本:
    21.5.0
    受支持的操作系统:
    RedHat
    CentOS
    SUSE
    Ubuntu
    语言:
    English
    校验和:
    (MD5)
    14ff515382e30996656fc8f455b940ac

    百度网盘下载(本资源是在线安装方式,要从NI服务器在线下载数据,可能会遇到IP被限制无法下载的问题):
    请注册视觉论坛会员登陆后购买附件下载查看
    NI-488.2 21.5Linux.txt (564 Bytes, 下载次数: 0, 售价: 5 快钱)

    NI-488.2 for Linux 21.5 Readme
    January 2022

    This file contains the latest information about NI-488.2 software for Linux and supersedes any information found in other documentation included in the distribution.
    Refer to NI Linux Technology for the most recent information about Linux support at NI.
    Refer to the NI-488.2 release notes for known issues, bugs fixed since the last release, and other release details.

    System Requirements
    NI-488.2 for Linux software for the Linux/x86 64-bit architecture has been tested on the following distributions:
    • openSUSE Leap 15.2
    • openSUSE Leap 15.1
    • Red Hat Enterprise Linux 8
    • Red Hat Enterprise Linux 7
    • CentOS 7
    • Ubuntu 20.04
    • Ubuntu 18.04
    NI-488.2 for Linux requires a 64-bit distribution and does not support 32-bit applications.
    Application Software Support
    • NI-488.2 for Linux supports the following application development environments:
      • 64-bit versions of LabVIEW 2019, LabVIEW 2020, and LabVIEW 2021
      • C and C++ (gcc)
    • NI-488.2 for Linux supports the NI-VISA API
    Supported Hardware
    NI-488.2 for Linux supports the following GPIB interfaces:
    • PCI-GPIB
    • PCI-GPIB+ *
    • PCI-GPIB/LP
    • PCIe-GPIB
    • PCIe-GPIB+ *
    • PCIe-GPIB/LP
    • PXI-GPIB
    • PXI-8232
    • GPIB-ENET/1000
    * Analyzer functionality is not supported on PCI-GPIB+ or PXI-GPIB+.
    Installation
    NI provides a repository add-on for all supported drivers that you can install using your Linux distribution's native package manager.
    • For detailed instructions, refer to Download and Install NI Driver Software on Linux Desktop on ni.com.
    • Download the installer for the repository add-on for your Linux distribution.
    • Install the repository add-on using the rpm command.
    • Select and install the following NI-488.2 for Linux driver package through your Linux distribution's package manager:
      • ni-488.2
      • libni4882-devel (optional, C and C++ support)
      • ni-488.2-iotrace-support (optional, NI IO Trace support)

    After the driver package(s) are installed, you must rebuild the new packages for the system kernel. NI recommends that you run the command 'dkms autoinstall' after installation, and before rebooting the system, to install the latest revision of all modules that have been installed for other kernel revisions. After doing so, the installed device drivers will function immediately on the next system start.
    Description of Utilities
    gpibexplorerGPIB Explorer is used to browse, configure, add, and delete GPIB interfaces.
    gpibtswGPIB Troubleshooting Wizard is used to verify your hardware and software installation.
    gpibintctrlGPIB Interactive Control is used to communicate with GPIB devices interactively.
    C/C++ Language Interface
    ni4882.hNI-488.2 header file
    libni4882.soDynamic library
    libni4882.aObject file that allows explicit loading of libni4882.so
    Device Configuration
    To configure a supported GPIB interface, refer to the Installation Guide located in /usr/share/doc/ni-488.2-documentation.
    Examples
    To have the ni4882 library loaded explicitly when the program makes the first call into the library:
    gcc prog.c libni4882.a -ldl

    g++ prog.cpp libni4882.a -ldl
    For more NI-488.2 API use examples, refer to /usr/share/ni4882/examples/README.
    Documentation and Help
    You can access NI-488.2 Help from GPIB Explorer.
    Linux Limitations
    Some features discussed in the NI-488.2 for Linux documentation are unavailable on Linux.
    NI-488.2 for Linux does not support 32-bit LabVIEW, LabVIEW Real-Time Module, or LabWindows/CVI ADEs.NI-488.2 does not provide the Measurement and Automation Explorer (MAX) graphical configuration utility that is available for other operating systems. To configure a supported GPIB interface, refer to the Installation Guide located in /usr/share/doc/ni-488.2-documentation.NI-488.2 software for Linux does not support power management. You must disable the power management settings or make sure all GPIB handles are offline before the system enters the power management modes.NI-488.2 software for Linux does not work with the fork() system call. Specifically, the interface and device handles opened by the parent process are not properly inherited by the child process. Any attempt to use already opened handles in the child process will result in a Segmentation Fault for the child process. A workaround is either to open a new interface/device handle in the child process or to use threads instead of processes to implement multitasking. Linux provides a POSIX-compliant thread library called pthreads.FAQs
    Q1: When I try to open Help from GPIB Explorer, I am prompted for my default web browser. What does this do?
    A1: This problem only occurs on systems where htmlview is not installed. Each user's response to this dialog box is stored in ~/natinst/.lvbrowser (where ~ is the user's home directory). If you need to change this response, you can edit this file or just delete it so that you will be prompted again when entering help.

    Q2: Why can't I discover a GPIB-ENET/1000 device in GPIB Explorer?
    A2: It is likely that your firewall is blocking the discovery of the device. You can get around this by disabling the firewall during discovery. This can be reverted after you have added the device.

    Q3: Launching gpibintctrl through GPIB Explorer causes the text utility to launch twice in different terminals.
    A3: This problem is due to a bug (#646317 bugzilla) in gnome-terminal (2.32.1-6.1). This causes GPIB Explorer to believe that gnome-terminal has failed to launch, so it re-launches the utility in another terminal. You can either close the duplicated window or update gnome-terminal to version 3.2.1 or above.

    Legal InformationCopyright:© 2007–2022 National Instruments Corporation. All rights reserved.
    This publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
    NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
    End-User License Agreements and Third-Party Legal Notices
    Notices are located in the /usr/share/doc/ni-488.2/NOTICES directory. EULAs are located in the /usr/share/ni/licenses directory.
    U.S. Government Restricted Rights
    If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
    IVI Foundation Copyright Notice
    Content from the IVI specifications reproduced with permission from the IVI Foundation.
    The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
    Trademarks
    Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
    Patents
    For patents covering the NI products/technology, refer to the NI Patent Notice at ni.com/patents.
    378677B-01

    回复

    使用道具 举报

    您需要登录后才可以回帖 登录 | 注册会员

    本版积分规则

    LabVIEW HALCON图像处理入门教程
    石鑫华机器视觉与LabVIEW Vision图像处理PDF+视频教程11种全套
    《LabVIEW Vision函数实例详解》教程-NI Vision所有函数使用方法介绍,基于NI VISION2020,兼容VDM2021
    LabVIEW图像处理教程
    机器视觉商城淘宝店铺
    视觉论坛充值赞助方法

    QQ|机器视觉论坛PCMV.CN ( 粤ICP备13000975号 )|网站地图

    GMT+8, 2022-5-29 19:31

    Powered by Discuz! X3.4

    Copyright © 2001-2021, Tencent Cloud. © 2009-2022 PCMV.CN

    快速回复 返回顶部 返回列表