This file contains important information about LabVIEW SignalExpress 2.5, including known issues, installation instructions, and compatibility issues. Refer to Getting Started with LabVIEW SignalExpress for information about getting started with LabVIEW SignalExpress. You can access this PDF by selecting Help»Getting Started with»LabVIEW SignalExpress in the LabVIEW SignalExpress environment.
Place the LabVIEW SignalExpress CD in your CD-ROM drive and follow the prompts through the rest of the installation.
Note If you are using Windows 2000, you must install Service Pack 4 and all additional critical updates before you install LabVIEW SignalExpress
Complete the following steps to use LabVIEW SignalExpress with hardware.
To convert a LabVIEW SignalExpress project to a LabVIEW VI, you must have the LabVIEW 7.1 Full Development System or later installed.
LabVIEW SignalExpress also installs the NI Measurement Studio Network Variable and WindowsForms support in the .NET Global Assembly Cache for runtime purposes.
| Bug ID | Fixed Issue |
| 38BF4MN7 | Window Menu: Arrange All - tiles the windows but does not bring them all to the front |
| 3BRAPM95 | Unchecking "Relative time" results in plot x-scale labeled "3.195G" |
| 3ECDGCTQ | Steps dependent on other steps that are not executable shouldn't be executable either |
| 3HG9CKNR | Refresh device list doesn't refresh enum in HW block. |
| 3IRCSLXX | No option to send digital data to a viewer in right-click menu |
| 3SJADPI8 | Instruments connected via USB can appear twice in IVI session name ring of IVI steps |
| 422E16RS | Load from SPICE - switching between Domain type does not re-show the Imported Signal (it goes blank) |
| 4248BMI8 | Non active log doesn't playback when viewed |
| 429CNLDE | Load from ASCII block does not undo correctly |
| 42NJGSI8 | Statistic step doesn't work with U32 data |
| 42QB80YG | Header should not clip text (horizontally) |
| 42RDHPLY | Save to ASCII preview graph legend incorrect after undo/redo |
| 439F04LY | Logging tool - undo redo messes up signal selection |
| 43GDR5YG | Viewer - Unchecking a plot in the legend should not force autoscale X |
| 444F4E26 | Output Range control should be exposed in Power Supply Interface |
| 445DS10X | Annotations don't show up when doing playback. |
| 44SACETQ | Timing and Transition - Edge and Pulse markers are not working |
| 45AEFHK9 | New Logs are not visible in the LabVIEW SignalExpress Express VI |
| 45BESONB | Drag and drop of docked config page does not indicate to SE that files needs to be saved |
| 45ECNJRS | Recording Options - Setting value doesn't change it if you don't click outside the control |
| 45ED3RRS | If you codegen a logging project that has logged data, LabVIEW SignalExpress Express VI also requires logged data to be present in the correct disk location |
| 45FD89TQ | Actual log much longer than requested. The additional data are also incorrect. |
| 45FA8OYG | Channel View: device not visible in Playback (refresh devices only applies to current work area) |
| 45N91UYG | Playback - Sample rate should be displayed in the playback option view |
| 45NDRTYG | Playback Options - Logged signals tree view should allow right-click menu to set Active Log |
| 45OGQOI8 | Viewer stays empty when dragging an imported log in playback mode |
| 45SD65YG | Restore Defaults should restore application specific defaults |
| 45TD6UOK | Creating data the first time is slow |
| 45TDTNK9 | Viewer doesn't autoscale Y axis correctly when scale is changed from Logarithmic to linear |
| 45TJ94I8 | Sweep's output dialog doesn't work well when there are many signals in the project. |
| 45TJDDI8 | The sweep step should output the iteration count |
| 464MGU2W | Delete Log dialog does not mention that Log is being used in Playback as well |
| 465I8W9 | Limit Test returns 'Missing inputs' error when user switches to limits defined by input signals |
| 465GF6RS | IVI Scope logs data poorly |
| 467CN2N7 | Code generation of synchronized steps fails in certain cases |
| 467DG4LY | Start condition with NI-Scope acquired sine wave doesn't work |
| 468DN7FN | Warning message pops up while building an application that contains 2 LabVIEW SignalExpress Express VIs |
| 46BB1PWW | Synchronization Code Should Filter Duplicate Clock\Trigger Names |
| 46BCMEXA | Can't stop VI after error from black box code gen |
| 46BD2D00 | Viewers - Cursors fails to update when the signal is renamed. |
| 46DDCH2W | Menu hot keys don't work when Signal Selection table is active in Recording Options tab |
| 46DF9RRS | Project Documentation tab - No button or key sequence to select all |
| 46EA3S3I | Limit Test displays "upper limit" terminal when >Lower limit is selected |
| 46ICP82W | Logging Signals Selection dialog forgets signals if you cancel and then return |
| 46IHN700 | Export to Excel - dragging log group from log window doesn't export all data in group. |
| 46JCRCLY | Conditional repeat does not allow logged inputs |
| 46K9CA0X | Scalar log and viewing it on the chart does not update the current value. |
| 46K9HB0X | "First Log Complete" shows up at unexpected time when having imported a log. |
| 46KADARS | Project conversion from within LabVIEW gives strange VIs for single and loop modes |
| 46KC2ENB | Dropping a array of double onto a non-Table viewer causes error dialog |
| 46LCPA3I | Statistics - selecting checkboxes while code is thinking resets buttons |
| 46LFM4X0 | Deleting a task while it is running in MAX causes errors |
| 46NFFFNR | Subset and resample allows negative subset lengths |
| 46O8CL0X | Loading project with viewer loading empty |
| 46O8D60X | Loading project with empty top viewer in playback mode. |
| 46PAI7XA | Channel View does not display all devices available |
| 46PCLIGX | Converting log to ASCII loses timestamp |
| 472C1UYG | Incorrect information in About window |
| 474952W9 | Examples that use DAQ Assistant should use 'Let NI-DAQ choose' whenever possible to avoid errors when user runs project on their hardware. |
| 474KQU00 | LabVIEW SignalExpress crashes when grouped output datatype changes when that output is not the first created output for a step |
| 475A0DK9 | Logging issues when device channel being logged is changed |
| 4760UJW9 | Snapshots in documentation appear empty when project reloaded. |
| 47S9GENB | Drag and drop a jpg file from explorer onto Documentation tab, SingalExpress crashes eventually |
| 47THBIAF | Playback on 1 Sample (on demand) signals doesn't scroll correctly |
| 48CG1LKZ | LabVIEW SignalExpress cursor values do not update when waveform changes |
| 48HAM62B | Cannot print graphics in Landscape mode |
| 48P91NX6 | Exporting logged scalar data to Excel during runtime gives blank Excel spreadsheet and clears log |
| 492DCAPJ | Statistics Step does not properly handle array of scalars input. |
© 2004–2007 National Instruments Corporation. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks.
For patents covering the National Instruments products, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your CD, or ni.com/patents.
楼主
