NI SignalExpress 1.0 Win32德语/日语/法语/英文 数据​记录​软件Signal Express1.0

石鑫华视觉

NI SignalExpress 1.0 Win32德语/日语/法语/英文 数据​记录​软件Signal Express1.0

SignalExpress
SignalExpress​使​您​无​需​编​程​即可​记录、​分析​和​显示​测量​设备​的​数据。
SignalExpress​是​一​款​交互​式​数据​记录​软件，​让​您​无​需​编​程，​即可​从​数百​种​数据​采集​仪器​和​设备​上​快速​采集、​分析​并​显示​数据。​SignalExpress​用户​可以​控制​400​多台​基于​PC​的​独立​仪器，​以及​来自​250​多个​数据​采集​设备​的​日志​数据。​该​软件​可以​处理​和​分析​信号，​并​将​结果​信号​发送​到​硬件​设备。​SignalExpress​还​提供​自动​LabVIEW​代码​生成​功能，​可​扩展​应用​程序。​用户​可以​轻松​创建​自​定义​报告，​并​将​其​导出​到​LabVIEW、​DIAdem​或​Microsoft Excel​中。

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

发布日期：2004/8/1
包含的版本：1.0
受支持的操作系统
Windows
Windows 2000
Windows XP
语言：德语, 日语, 法语, 英文
应用程序位数：32位
校验和：
文件大小: 158684168 字节 (151.33 MB)
修改日期: 2004-08-16 22:49
MD5: 2d3b93eb07923a094b33e28627aa02a6
SHA1: 712bb964ec8f2c9731d27ba50595619cb6d70374
SHA256: b9145213298e6ccad3ab321993c6f413ea29a3009f72997e68095e437e98961c
CRC32: d4cba963
百度网盘和NI官方下载地址：
请注册登录视觉论坛账号，购买附件查看下载地址
SignalExpress1.0.txt (499 Bytes, 下载次数: 0, 售价: 10 元)

2022-12-7 14:49 上传

点击文件名下载附件

NI SignalExpress Readme

August 2004

This file contains important information about SignalExpress, including known issues, installation, and compatibility issues. Refer to the Getting Started with NI SignalExpress for information about getting started with SignalExpress. You can access this PDF by selecting Help»Getting Started with NI SignalExpress in the Express Workbench environment.

Known Issues

• LabVIEW prompts you with a warning dialog box during project conversion if LabVIEW loads vi.lib subVIs from the National Instruments\LabVIEW 7.1 directory rather than from the directory where you saved your project. Click the OK button to resume conversion.
• The Load from ASCII, Load from LVM, and Load from SPICE steps will convert only 20 imported signals into the LabVIEW VI during project conversion. If you want to import more than 20 signals and then convert the project to a LabVIEW VI, use two or more Load from ASCII, Load from LVM, or Load from SPICE steps.
• You cannot convert an Express Workbench project to a LabVIEW block diagram if that project uses software triggers.
• Text in any step configuration view does not display correctly if you set your monitor resolution to 1400 x 1050 or higher or if you use large fonts.
• Due to driver and operating system issues, absolute time stamps have an inaccuracy of 100 ms to 200 ms. National Instruments recommends that you use relative time stamps.
• You cannot use Start Trigger from the NI-FGEN Standard Function step or the NI-FGEN Arbitrary Waveform step in continuous generation mode if the NI-FGEN steps are in a sweep operation. The reason is that during a sweep operation, the NI-FGEN devices only send a start trigger at the first sweep iteration.
• If you configure a device to start on a digital trigger and the trigger source is the start trigger of an analog output DAQmx device, the device might receive the start trigger before the generation starts. This can occur the first time you run the project or on the first iteration of a continuous execution. To work around this issue, configure the analog output device to be a slave by configuring the device with a digital trigger, and selecting a trigger signal from another device as the trigger source.
• If you load a project which has a step which is synchronized to another step and has Wait for previous checked, the project will hang when run. The run can be aborted. Uncheck Wait for previous, save the project, and reload. The project will now run normally.
  

Installation Instructions

Place the SignalExpress CD in your CD-ROM drive and follow the prompts through the rest of the installation.

Complete the following steps to use SignalExpress with hardware

• Install the appropriate driver for that hardware. For Multifunction DAQ, use DAQmx. For High-Speed Digitizers, use NI-SCOPE. For Signal Generators, use NI-FGEN. All drivers are available on the Driver CD.
• Shut down the computer.
• Install the hardware.
• Restart the computer to complete the software installation.
  

Compatibility Issues

SignalExpress is compatible with the following products:

• DAQmx 7.3 or later
• NI-SCOPE 2.7 or later
• NI-FGEN 2.2 or later
  

To convert an Express Workbench project to a LabVIEW VI, you must have the LabVIEW 7.1 Full Development System or greater installed.

SignalExpress will install or update the following applications:

• MAX 3.1.1
• LabVIEW Run-Time Engine 7.1
• LabVIEW Run-Time Engine 7.0
  

---

© 2004 National Instruments Corporation. All rights reserved.