机器视觉论坛微信公众号:石鑫华视觉网

 找回密码
 注册会员
查看: 78|回复: 0

[NI应用软件] NI Circuit Design Suite 10.0 Pro Win32Eng NI电路设计套件10.0专业版

[复制链接]
  • TA的每日心情
    奋斗
    昨天 11:25
  • 签到天数: 2554 天

    连续签到: 6 天

    [LV.Master]2000FPS

    发表于 2022-5-20 15:48:09 | 显示全部楼层 |阅读模式

    注册登陆后可查看附件和大图,以及购买相关内容

    您需要 登录 才可以下载或查看,没有账号?注册会员

    x
    Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件、模块、工具包、驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Activator来激活,以下链接可下载:
    NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
    http://pcmv.cn/thread-490-1-1.html

    视觉论坛的各种资源,除了视觉相关的模块有使用外,大部分的都不会使用,所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址,那视觉论坛也没有办法,只能尝试使用百度网盘地址下载;如果百度网盘的下载地址失效过期,可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好,有些时候速度很慢或大的资源下载很容易出错,这样会造成安装过程各种类型报错而无法安装。建议在下载完成后,对下载资源做校验和验证(NI一般会提供MD5或SHA256等),与官方或视觉论坛提供的校验和对比,一致就可以安装,如果不一致,则需要重新下载。视觉论坛早期下载的资源,那时候NI没有这么多限制,基本上都是正常下载的资源;后期下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘,所以百度网盘的资源基本上是正确的。校验和工具下载地址:
    文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
    http://pcmv.cn/thread-26524-1-1.html

    NI Circuit Design Suite 10.0 Pro Win32Eng NI电路设计套件10.0专业版

    Circuit Design Suite(CDS)电路设计套件

    电路设计套件结合了Multisim和Ultiboard软件,为电路设计、仿真、验证和布局提供了一套完整的工具。
    电路设计套件为您提供了直观且经济高效的设计电路工具。您可以执行交互式SPICE仿真并无缝转换到PCB布局和布线软件。该套件专为教学、科研和设计而开发,提供了先进的仿真功能,可以让您清楚地了解电路在各种场景下的性能。

    10.0Pro
    文件大小: 293668155 字节 (280.06 MB)
    修改日期: 2019-12-17 11:17
    MD5: 1eb27729cd9c3855f24015c05de4740f
    SHA1: 7ec4c2c0d4002e591f43ed1a240aaea01a340bd2
    SHA256: d9d3469a3b227838730565e3bd3557b09197f76c68a2e7689c35c61c798f1999
    CRC32: 735c4968

    百度网盘与NI官方下载地址:
    电路设计套件CDS10.0Pro.txt (115 Bytes, 下载次数: 0, 售价: 10 快钱)

    Circuit Design Suite 10.0 Readme for Windows 2000/XP
    January 2007
    This file contains important information about Circuit Design Suite, including installation and compatibility issues. Refer to the Multisim and Ultiboard User Guides for information about getting started with Circuit Design Suite. You can access these PDFs by selecting Multisim User Guide or Ultiboard User Guide in Start» Programs»National Instruments»Circuit Design Suite 10.0»Documentation.
    Contents
    Before Installation

    After Installation

    After Uninstallation

    Additional Information

    Before Installation
    • You cannot install Circuit Design Suite 10.0 in the same directory as a previous version of Multisim/Ultiboard. In order to install Circuit Design Suite 10.0 into a directory that contains a previous version of Multisim/Ultiboard, you must uninstall the previous version of Multisim/Ultiboard first. You should also backup the corporate database, located in \database\CPCOMP_S.PRJ, because the file will be replaced.
    • You must login as an administrator to install Circuit Design Suite.
    • Before you run the Circuit Design Suite installer, you should temporarily disable any virus protection programs that are running on your machine. If you do not disable your virus protection program, the installer might run slowly, hang, or behave erratically.
    • Refer to the Circuit Design Suite Release Notes for details of changes since Multisim\Ultiboard 9. You can access this PDF by selecting Circuit Design Suite Release Notes in Start» Programs»National Instruments»Circuit Design Suite 10.0»Documentation.
    • Circuit Design Suite 10.0 is compatible with LabVIEW 8.0 and LabVIEW 8.2.
    • Circuit Design Suite 10.0 installs the following additional software components:
      • LabVIEW 8.0 Run-Time Engine
      • LabVIEW 8.2 Run-Time Engine
      • Support and Upgrade Utility
      • HI-TECH C51-lite V9.60PLO
      • HI-TECH PICC lite V9.60PLO

    After Installation
    • The best way to familiarize yourself with Circuit Design Suite is to explore the Multisim User Guide and Ultiboard User Guide, which contains all of the Circuit Design Suite documentation in electronic format. You can access these PDFs by selecting Multisim User Guide or Ultiboard User Guide in Start» Programs»National Instruments»Circuit Design Suite 10.0»Documentation.
    After Uninstallation
    • Uninstalling Circuit Design Suite will not remove user data:
      • User configuration files and database located in \National Instruments\Circuit Design Suite\10.0
      • Corporate database located in \database.
    Additional InformationDirectory Permissions
    • Circuit Design Suite requires that all users have write access to files in the Circuit Design Suite installation directory. The Circuit Design Suite installer automatically gives all Authenticated Users write access to the installation directory.
    Sample Files
    • Sample files are installed into the Circuit Design Suite installation directory. All users should copy the sample files to their My Documents folder prior to modifying these files.
    Support
    • For additional information about Circuit Design Suite, refer to the support section of the National Instruments Website at www.ni.com/support/. The Web site contains many electronic support services to help you in your development.
    • National Instruments offers a Circuit Design Suite technical discussion forum. You can join the forum at forums.ni.com
    Windows XP Professional x64
    • Circuit Design Suite is not supported on Windows XP Professional x64 and has not been comprehensively tested on this operating system. Cursory testing has shown that basic functionality of Circuit Design Suite works; however, several of the assemblers for the Multisim MCU Module do not work correctly.

    Copyright
    © 2007 National Instruments Corporation. All rights reserved.
    Trademarks
    National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Ultiboard is a registered trademark and Multisim and Electronics Workbench are trademarks of Electronics Workbench. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
    Patents
    For patents covering National Instruments products, refer to the appropriate location: the patents.txt file on your CD, or www.ni.com/patents.

    回复

    使用道具 举报

    您需要登录后才可以回帖 登录 | 注册会员

    本版积分规则

    LabVIEW HALCON图像处理入门教程
    石鑫华机器视觉与LabVIEW Vision图像处理PDF+视频教程11种全套
    《LabVIEW Vision函数实例详解》教程-NI Vision所有函数使用方法介绍,基于NI VISION2020,兼容VDM2021
    LabVIEW图像处理教程
    机器视觉商城淘宝店铺
    视觉论坛充值赞助方法

    QQ|机器视觉论坛 ( 粤ICP备13000975号 )|网站地图

    GMT+8, 2022-6-26 12:36

    Powered by Discuz! X3.4

    Copyright © 2001-2021, Tencent Cloud.

    快速回复 返回顶部 返回列表