机器视觉论坛微信公众号:石鑫华视觉网

 找回密码
 注册会员
查看: 107|回复: 0

[NI应用软件] NI Switch Executive 1.0 Eval and Patch Win32Eng 美国国家仪器开关管理软件1.0评估版及补丁下载

[复制链接]
  • TA的每日心情
    奋斗
    9 小时前
  • 签到天数: 2554 天

    连续签到: 6 天

    [LV.Master]2000FPS

    发表于 2022-5-15 23:52:03 | 显示全部楼层 |阅读模式

    注册登陆后可查看附件和大图,以及购买相关内容

    您需要 登录 才可以下载或查看,没有账号?注册会员

    x
    Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件、模块、工具包、驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Activator来激活,以下链接可下载:
    NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
    http://pcmv.cn/thread-490-1-1.html

    视觉论坛的各种资源,除了视觉相关的模块有使用外,大部分的都不会使用,所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址,那视觉论坛也没有办法,只能尝试使用百度网盘地址下载;如果百度网盘的下载地址失效过期,可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好,有些时候速度很慢或大的资源下载很容易出错,这样会造成安装过程各种类型报错而无法安装。建议在下载完成后,对下载资源做校验和验证(NI一般会提供MD5或SHA256等),与官方或视觉论坛提供的校验和对比,一致就可以安装,如果不一致,则需要重新下载。视觉论坛早期下载的资源,那时候NI没有这么多限制,基本上都是正常下载的资源;后期下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘,所以百度网盘的资源基本上是正确的。校验和工具下载地址:
    文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
    http://pcmv.cn/thread-26524-1-1.html

    NI Switch Executive 1.0 Eval and Patch Win32Eng 美国国家仪器开关管理软件1.0评估版及补丁下载

    Switch Executive是一款开关管理与路由应用软件,能够加速开发过程、简化对复杂开关系统的维护。
    Switch Executive提供交互式配置和自动路由功能,使开关系统的设计变得更加容易。您可以为开关模块、外部连接和信号路由分配别名,从而简化系统的文档,以便未来进行修改。使用Switch Executive开发的测试代码可以复用于LabVIEW、LabWindows/CVI、Measurement Studio和TestStand环境。

    校验和:
    文件大小: 528356945 字节 (503.88 MB)
    修改日期: 2021-09-14 23:31
    MD5: f29444dde041492ae0f35ea37d90588f
    SHA1: fcfb0d944a9de0766c28cc7d71aa455152ed3325
    SHA256: 7f0e1725cafa27ab6370f2dffef97ad8ba4dcc440cef60540f44b172c8467a17
    CRC32: 45e0d21e

    百度网盘下载地址和NI官方下载地址:
    请注册登陆视觉论坛会员,购买附件查看
    Switch Executive1.0.txt (590 Bytes, 下载次数: 0, 售价: 10 快钱)

    NI Switch Executive Readme File
    Trademarks: CVI, LabVIEW, National Instruments, ni.com, PXI, and SCXI are trademarks of National Instruments Corporation. Product and company names mentioned herein are trademarks or trade names of their respective companies.
    Thank you for using National Instruments Switch Executive.
    This particular installation of Switch Executive installed the above components. NI components also install Microsoft Internet Explorer 5.0, unless the same or better version is not already present on the system.
    Uninstalling NI Switch Executive
    For Windows 2000/NT/Me/9x, complete the following:
    • Open the Control Panel from the Start\Settings\Control Panel Menu and select Add\Remove Programs.
    • Select NI Switch Executive from the list provided and click Add\Remove.
    • Repeat for other applications you want to remove.
    Examples
    \Examples\SwitchExecutive\
    TestStand
    \Examples\SwitchExecutive\
    C/C++
    \Examples\VisualBasic\
    Using NI Switch Executive
    To view the above listed documents, you will need Adobe Acrobat Reader. Go to Adobe's web site to download Acrobat Reader. http://www.adobe.com.
    Known IssuesniSE_OpenSession and niSE Open Session.vi Memory Leak
    The LabVIEW VI "niSE Get Ivi Device Session.vi" leaks a small amount of memory each time it is called. The memory will be freed when LabVIEW exits. Try to avoid calling this function multiple times if it can be avoided.
    Instrument Drivers
    If you install NI Switch Executive without having previously installed NI-SWITCH, it is possible that the NI-SWITCH VI's might not get installed for LabVIEW. To workaround this problem, install NI-Switch from the CD that came with your hardware before installing NI Switch Executive.
    "DLL Not Found" - Microsoft Visual Basic
    If you are using the SCXI-1127 in multiplexer mode, there are a few anomalies exposed by NI Switch Executive. First, the SCXI-1127 supports different wire modes (1, 2, or 4 wires) as configured through NI-DAQ. Through NI Switch Executive, however, you may only use it with 2 wire channels. Second, the list of channels retrieved from the instrument driver includes all of the channel names as though it was configured as a 1 wire switch. Because of this, half of the channels may appear valid in NI Switch Executive but actually are not. Consult the SCXI-1127 hardware reference manual and NI-SWITCH user manual for a list of which channels are valid 2 wire channels. In NI Switch Executive you will need to ignore those channels which are not valid. This behavior will be fixed with a future NI-SWITCH release.
    Installation failure on Windows 95 and NT
    The IVI configuration of an IVI switch is read at the time that the switch is added to the NI Switch Executive Virtual Device. If changes are made to the IVI configuration, such as creating virtual channels or changing default setup to make some channels come up as source or configuration channels, those changes will not automatically be reflected in NI Switch Executive. To get NI Switch Executive to recognize the change you must remove the IVI switch from the virtual device and then re-add it. The preferred manner for modifying source and configuration channel attributes is via the Channels panel in Measurement & Automation Explorer. Doing so will avoid such hassles.
    Documentation Errata
    The online help for NI Switch Executive is the most complete and up to date source for product information. There were some minor documentation issues found in some of the printed materials after they returned from the printer. That errata is documented below.
    • On pages 4 and 5 of the Quick Reference Guide, the Note section should read:
      • Note: The channel on either end of the bracketed list must not be:
        • Marked as a source channel (one or the other is valid)
        • A configuration channel
      • Note: Any channel within a route specification string that is not an endpoint must either be a configuration channel or must be hardwired to an endpoint.
    • On page 6 of the Quick Reference Guide, some error codes are not listed. See the online help for a complete list.

    回复

    使用道具 举报

    您需要登录后才可以回帖 登录 | 注册会员

    本版积分规则

    LabVIEW HALCON图像处理入门教程
    石鑫华机器视觉与LabVIEW Vision图像处理PDF+视频教程11种全套
    《LabVIEW Vision函数实例详解》教程-NI Vision所有函数使用方法介绍,基于NI VISION2020,兼容VDM2021
    LabVIEW图像处理教程
    机器视觉商城淘宝店铺
    视觉论坛充值赞助方法

    QQ|机器视觉论坛 ( 粤ICP备13000975号 )|网站地图

    GMT+8, 2022-6-25 21:14

    Powered by Discuz! X3.4

    Copyright © 2001-2021, Tencent Cloud.

    快速回复 返回顶部 返回列表