RFmx CDMA2k is an application software that provides simple access to the most advanced optimization techniques such as multimeasurement parallelism and multi-DUT measurements. The result is fast, high-quality measurements with minimal software development effort. Using this software, you can perform physical-layer analysis on CDMA2k cellular signals including MODACC, ACPR, CHP, OBW, QEVM, CDA, SlotPower, SlotPhase, and SEM. RFmx CDMA2k is completely interoperable with all RFmx APIs.
[url=]New Features[/url]
RFmx CDMA2k 19.0 includes the following new features:
Support for LabVIEW 2019 (32-bit and 64-bit)
Support for De-embedding S-Parameter External Attenuation Tables
Addition of Reference Level Headroom property
RFmx CDMA2k 3.0 includes the following new features:
Support for PXIe-5820
Support for self-calibration in the RFmx Soft Front Panel
RFmx CDMA2k 2.5 includes the following new features:
Addition of APIs to perform self-calibration and partial self-calibration
Addition of RFmx Debug Configuration Utility to configure debug settings
Support for LabVIEW 2018 (32-bit and 64-bit)
Support for querying configuration attributes without calling RFmxCDMA2k Commit API
RFmx CDMA2k 2.3 includes the following new features:
Addition of code domain analysis (CDA) measurement
Addition of Slot Power measurement
Addition of Slot Phase measurement
Addition of functions to query signal configuration names and result names
Addition of a sequential FFT measurement method in the ACP measurement
Support for LabVIEW 2017 (32-bit and 64-bit)
Support for frequency-dependent external attenuation tables
Support for monitoring API calls in the NI IO Trace
Supported Hardware
The following hardware products are supported in all operating systems listed in the Supported Operating Systems section.
Vector Signal Analyzers
PXIe-5663
PXIe-5663E
PXIe-5665
PXIe-5668
PXIe-5668 with PXIe-5698
Device-specific information about these modules is included in the NI RF Vector Signal Analyzers Help.
Vector Signal Transceivers
PXIe-5644
PXIe-5645
PXIe-5646
PXIe-5840
PXIe-5820
Device-specific information about these modules is included in the NI RF Vector Signal Transceivers Help.
System Requirements
RFmx CDMA2k has the following requirements:
Processor—1 GHz 64-bit (x64) processor
4 GB RAM*
A screen resolution of 1,024 x 768
Windows 10/8.1/7, with all available critical updates and service packs
*Depending on the amount of data acquired and/or processed, a larger amount of memory may be required.
Supported Operating Systems
RFmx CDMA2k 19.0 supports the following 64-bit operating systems:
Windows 10/8.11/7 SP12
Windows Server 2012 R21
Windows Server 2008 R2 SP12
1 NI software installs VC2015 Runtime and .NET 4.6.2. Windows 8.1 and Windows Server 2012 R2 require Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates.
2 NI software is signed with a SHA-256 certificate. Windows 7 SP1 and Windows Server 2008 R2 SP1 require Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update.
RFmx CDMA2k supports the following application software versions, including service packs. You should install application software, such as LabVIEW, LabWindows/CVI or Microsoft Visual Studio®, before installing RFmx CDMA2k. To add support for application software installed after installing RFmx CDMA2k modify your RFmx CDMA2k installation or launch the RFmx CDMA2k installer again. If you are not using NI application software, refer to Microsoft Visual Studio Support.
[tr][/tr][/table][table]
Application Software
Versions Supported by RFmx CDMA2k
LabVIEW2016, 2017, 2018 SP1 f4 patch, or 2019Required Software
NI-RFSA 14.1 or later
Microsoft Visual Studio Support
If you are using the RFmx CDMA2k .NET Class Library, .NET Framework 4.0 (minimum) is required. The RFmx CDMA2k .NET Class Library can be used with Visual C# or Visual Basic .NET in any Visual Studio version that can target .NET Framework 4.0.
To use the .NET API, you must install the .NET class libraries or the .NET wrapper in addition to the NI device driver. For information about versions of the .NET Framework and the drivers each supports, as well as the download location of the installer files, refer to National Instruments .NET Driver Support.
Installation Instructions
NI installs RFmx CDMA2k using NI Package Manager. If you do not already have NI software installed, RFmx CDMA2k installs NI Package Manager to handle the installation of your NI software. Visit ni.com/info and enter the Info Code NIPMDownload to download NI Package Manager. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using NI Package Manager.
[url=]Installed Software[/url]Installed Software
is an alias for the following National Instruments file folder location: Users\Public\Public Documents\National Instruments
is an alias for the following National Instruments file folder location:
Program Files (x86)\National Instruments\MeasurementStudioVS2010
is an alias for the following National Instruments file folder location:
Program Files (x86)\National Instruments
is an alias for the following file folder location:
Windows\SysWOW64 for 32-bit programs and windows\system32 for 64-bit programs
Select Start»All Programs»National Instruments»RFmx CDMA2k»RFmx CDMA2k Measurement Interactive Panel to launch the RFmx CDMA2k Measurement Interactive Panel.
Finding Examples
You can access all the installed RFmx CDMA2k examples at Start»All Programs»National Instruments»RFmx CDMA2k»RFmx CDMA2k Examples.
Accessing the Documentation
Documentation for RFmx CDMA2k is located at Start»All Programs»National Instruments»RFmx CDMA2k»RFmx CDMA2k Documentation. The documentation set is composed of the following documents.
Document
Format
Description
RFmx CDMA2k Help
HTML/Windows Help
Contains primary help content for RFmx CDMA2k. This help file is an HTML version of a traditional user manual that includes the following information:
An introduction to RFmx CDMA2k
How to get started with application development
A complete reference for all RFmx CDMA2k programming functions and VIs
RFmx CDMA2k 19.0 Readme
HTML (this document)
Contains information about supported hardware and operating systems, new features, fixed issues, and legal notices.
For the most recent revisions of documentation and for newly released documentation, visit ni.com/manuals.
[url=]Accessing VIs[/url]
RFmx CDMA2k palette VIs are available from the Functions»Measurement I/O»NI-RFmx»CDMA2k palette.
Product Security and Critical Updates
Visit ni.com/security to view and subscribe to receive security notifications about National Instruments products. Visit ni.com/critical-updates for information about critical updates from National Instruments.
[url=]Behavior Changes[/url]
The following items are behavior changes in RFmx CDMA2k 19.0 from RFmx CDMA2k 3.0.
Dropped support for LabVIEW 2015
Deprecated the Recommended I/Q Measurement Bandwidth property in RFInstr
The following items are behavior changes in RFmx CDMA2k 2.3.1 from RFmx CDMA2k 2.3.
Changed the default value of the I/Q Power Edge Source property to ""(empty string)
The alias 'default@CDMA2k' for the default signal name is accepted as a valid signal name in a selector string parameter
LabVIEW built binaries using RFmx versions older than 2.2 are no longer supported
[url=]Bug Fixes[/url]
The following items are the IDs and titles of a subset of issues fixed in RFmx CDMA2k. This is not an exhaustive list of issues fixed in the current version of the RFmx CDMA2k. If you have a CAR ID, you can search this list to validate that the issue has been fixed.
The following items are changes in RFmx CDMA2k 3.0 from RFmx CDMA2k 2.5
ID
Fixed Issue
706047
Fixed an occasional crash which might occur on closing LabVIEW 2017 IDE or LabVIEW 2017 built applications that use RFmx.
719203
Fixed an issue where a timeout error was thrown when the digital trigger was configured when Using breakpoints in C/C++/.NET application was selected in the PXIe-5840.
The following items are changes in RFmx CDMA2k 2.4 from RFmx CDMA2k 2.3.1.
ID
Fixed Issue
640495
Fixed an issue where switching between measurements from an RFmx cellular personality to Demod resulted in higher EVM on 5668R.
The following items are changes in RFmx CDMA2k 2.3.1 from RFmx CDMA2k 2.3.
ID
Fixed Issue
650095
Fixed an issue where the RFmxInstr Close API did not abort a measurement in progress, but instead waited for the measurement to finish before closing.
650083
Fixed an issue with RFmxInstr Save All Configurations API to save the attribute configurations depending on the corresponding number of channels configured by user.
648703
Fixed an issue where passing NULL as selector string in a few C functions, caused the function to crash.
Automating the Installation of NI Products
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.
If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:
Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.
Using NI Software with Microsoft Windows 8.1
When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.
RFmx CDMA2k Drops Support for Windows 7 (64-Bit) and Windows Server 2008 R2 in 2021
RFmx CDMA2k will drop support for Windows 7 (64-bit) and Windows Server 2008 R2 starting in 2021. Versions of this product that ship after May 1, 2021, may not install or execute correctly on these operating systems. For detailed information about NI operating system support, visit ni.com/r/win32bitsupport.
For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
Notices are located in the \_Legal Information and directories.
EULAs are located in the \Shared\MDF\Legal\license directory.
Review \_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the NI products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.