NI Circuit Design Suite 12.0 Edu Win32Eng/Ger/Jpn NI电路设计套件12.0教学版

石鑫华视觉

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

NI Circuit Design Suite 12.0 Edu Win32Eng/Ger/Jpn NI电路设计套件12.0教学版

Circuit Design Suite(CDS)电路设计套件

电路设计套件结合了Multisim和Ultiboard软件，为电路设计、仿真、验证和布局提供了一套完整的工具。
电路设计套件为您提供了直观且经济高效的设计电路工具。您可以执行交互式SPICE仿真并无缝转换到PCB布局和布线软件。该套件专为教学、科研和设计而开发，提供了先进的仿真功能，可以让您清楚地了解电路在各种场景下的性能。

12.0EDU
zip
文件大小: 623275352 字节 (594.40 MB)
修改日期: 2014-07-25 05:25
MD5: da81e6d3fe5bab7dd448929d8ab036bf（官方正确）
SHA1: 3a49f7de5cad0451817cc081a2fc906c207bd9e8
SHA256: e56c388a1e2c725fabcf29fbbe1f7074f04d9da70475082b2a2c3bc0ff4e29c9
CRC32: 172f499c

exe
文件名: NI_Circuit_Design_Suite_12_0_Education.exe
文件大小: 623377056 字节 (594.50 MB)
修改日期: 2012-02-11 12:58
MD5: b66f6970f765cffa586220e49387c86e
SHA1: 8f404a2c9cc006f8e80436587c550b2d80fc2b21
SHA256: 8b754f984124a943222600cf7d46cae0b31eb62c4d5bdd07a2c0357c15b0c053
CRC32: e5c39266

百度网盘与NI官方下载地址：
CDS12.0EDU.txt (1.34 KB, 下载次数: 0, 售价: 10 元)

2021-5-31 21:24 上传

点击文件名下载附件

NI Circuit Design Suite 12.0 Readme for Windows

January 2012

This file contains important last-minute information about Circuit Design Suite 12.0 for Windows, including installation issues, compatibility issues, bugs fixed, and changes from Circuit Design Suite 11.x. Refer to the NI Circuit Design Suite Release Notes for a complete list of new features in Circuit Design Suite 12.0 . You can access this document by selecting Help»Release notes in Multisim or Ultiboard or navigating to Start»All Programs»National Instruments»Circuit Design Suite 12.0»Documentation»Release Notes.

Refer to the Getting Started with NI Circuit Design Suite manual for information about getting started with Circuit Design Suite. You can access this PDF from Start»All Programs»National Instruments»Circuit Design Suite 12.0»Documentation»Getting Started.

Supported Platforms
Installing Circuit Design Suite 12.0
Known Issues
Bug Fixes
New Components

Supported Platforms

Circuit Design Suite 12.0 supports Windows Vista/XP 32-bit editions, Windows Vista 64-bit edition, Windows 7 32-bit and 64-bit editions, Windows Server 2003 R2 (32-bit) and Windows Server 2008 R2 (64-bit). Circuit Design Suite 12.0 does not support Windows NT/Me/98/95/2000, Windows XP x64, or the Windows Server non-R2 editions.

Installing Circuit Design Suite 12.0Installing Multiple Versions

Circuit Design Suite 12.0 installs side-by-side with version 11.x. You must activate Circuit Design Suite after you install it. It will not activate itself automatically.

Installing Circuit Design Suite Silently

You can install Circuit Design Suite without viewing any installation dialog boxes. Refer to the silent_install.txt file in the Supportfiles directory in the Circuit Design Suite distribution for more information about installing Circuit Design Suite silently.

Archiving Circuit Design Suite databases

National Instruments recommends that you regularly back up the files created within the Multisim and Ultiboard components of NI Circuit Design Suite. Additionally, you should back up internal files that store user-created data, such as database components. For more information about which files to backup and where to find them, refer to the Help.

Uninstalling

Uninstalling Circuit Design Suite will not remove user data. For more information about the locations of user database and configuration files, refer to the Archiving Data Help topic.

Known IssuesLabVIEW

• LabVIEW functionality (LabVIEW instruments and grapher interpolation) will not work if the installation path uses characters that are not native to the "Language for non-Unicode programs" setting, available by selecting Start»Control Panel»Regional and Language Options and selecting the Advanced tab. In the Vista OS, use the "Current language for non-Unicode programs:" setting in the Administrative tab. LabVIEW functionality works for Unicode characters that are native to this setting.
  

Windows Vista

• You cannot install Circuit Design Suite 12.0 on Windows Vista Starter edition.
  

Circuit Design Suite

• Multisim and Ultiboard leak GDI resource handles when used over extended periods of time, eventually leading to unpredictable user interface behavior and crashes. This is an issue with MFC applications running on Windows XP SP2 and Windows Server 2003. For more information and workarounds, refer to KB 4JREGSXL:Multisim or Ultiboard Leaking GDI Resource Handles.
• The Multisim Buzzer component will not generate any sound in Windows Vista-64 bit and on Windows XP-64 bit. This is due to Microsoft not supporting use of the Beep function in those versions of Windows. The Beep function is used by this component to generate sound.
• The upgrade to the PICC 9.82 (pro) compiler in Circuit Design Suite 12.0 may break existing code in MCU files since macros used by the compiler have changed. For example, WDTEN has been replaced with WDT_ON, and OPTION has been replaced by OPTION_REG.
  

Release Notes

• The "snippet" feature includes code from libpng 1.4.3, licensed by a third party or parties pursuant to the libpng license. For more information, refer to Notifications.pdf at ... \National Instruments\Circuit Design Suite 12.0\Licenses\.
  

Bug Fixes

The following is a subset of the issues fixed between Circuit Design Suite 11.0.2 and Circuit Design Suite 12.0.

Multisim ( 57 )
Bug ID	Description
260822	3D parts (using bitmaps of real components) do not show "placed" status on schematic workspace.
262628	Switching from show net names to hide netnames resets the positioning of net names.
268734	TRIAC Models do not simulate as expected.
269201	PZT2907A and PZT2907A should be PNP components.
269965	Digital state machine component does not work as expected.
270357	Multisim crashes when trying to change values of lumped elements in Match Net. Designer.
270574	BAT15_099R is incorrect.
271671	.IC and .NODESET commands malfunction if used within .subckt.
273803	Incorrect errors are generated when expressions reference nodes that start with the $ symbol.
274388	User database template should be better named to avoid customer confusion.
274472	Clicking the mouse wheel should pan the document in Multisim.
274856	Preferred net names show up incorrectly when merging nets.
274869	Unable to hide the SC symbol name for a bus connector via sheet properties.
274910	Ron/Roff values for Interactive switches have poor defaults and are not configurable.
275132	Refdes is duplicated when copying and pasting a component in some cases.
275264	Oscilloscope when in XY or YX or A/B or B/A mode should have facilities to clear screen.
275400	Back annotating a design with nets on bus lines does not behave correctly in some cases.
275448	Pins not added to heirarchical blocks or subcircuits when back annotating.
275474	In 120 DPI Display Mode Graph Background Color List Is Not Working in Windows XP.
275491	Shorting Bus Lines causes crash in some cases.
275542	CNTR_BCD_SDC component will always count down after first down count.
275616	Bus Vector Connect dialog not filled in when first opened.
275661	Multisim crashes when adding/removing component in some cases.
275667	Export to PRZ doesn't grab linked landpatterns.
275691	Potentiometer Not Displaying Increment Precision Digits.
277103	Behavioral sources were slow in Multisim version 11.x.
283843	BOM Report to Text is incorrect if the order of the columns is modified.
285414	PWL source with Unicode characters in the path fails to simulate.
287439	1N5619GP diode uses the incorrect simulation model.
289548	JK flip flop in a PLD design does not work as expected.
291144	Duplicate pages show up in a multi-page design when you add it to a project.
291724	Multisim Crashed when non convergent analyses are swept in some cases.
305192	Buses can only be used in net name mode in some cases.
306480	Cutting, changing part settings and then pasting section of component will get settings out-of-sync in some cases.
306485	Naming and modifying nets across different instances of a subcircuit can cause Multisim to crash.
307199	Using the digital state machine with a very long file name will cause a crash.
307472	Undo does not undo the bus color change.
309264	Sensitivty analysis causes Internal simulation error in mixed-mode circuits.
310389	Switch toggling behaves erratically when in subcircuits in some cases.
310422	A Hierarchical block connector on a multi-page design is not renamed correctly in some cases.
310826	Cancelling the placement of a HB from file will affect the netlist for the opened design.
311328	Multisim crashes when copying a HB that contains a missing HB.
311799	LMV393MM and LMC6772AIMM have bad symbol pin names.
313502	Certain parameter and expression heavy models crash Multisim.
314137	Watt Meter doesn't operate with DC Source.
314142	Gerber Drill and NC Drill holes are not exported correctly.
315101	LT1882 model is not correct.
315461	AD8694* components have incorrect footprint pin mappings.
315698	Changing RefDes in a large design takes a very long time.
315869	Editing Sub-circuit Symbol Breaks Bus Connection Into The Symbol.
317233	Multisim crashes when connecting two wire to a pin using junctions.
317646	Models with different data but same model ID wil be used incorrectly in a multi-sheet design.
317906	The gain of the "Current probe" should be displayed on the schematic.
318588	Opening a Multisim file in windows explorer fails to open file if Multisim is already running.
321176	Graph axis range minimum and maximum values are swapped without warning in some cases.
323164	Several components in TIL family have incorrect logic technology setting, leading to simulation errors.
325816	Multisection RNxxxx components should have their emitters marked as common.
Ultiboard ( 48 )
263374	Importing an Orcad max file will make the component refdes a part of the footprint's name.
263473	Clearance for elliptical arc drawn improperly.
265586	Valid DRC errors are missing from Ultiboard v 10.x.
267766	Board outline is not closed when a DXF file is merged to the outline layer in some cases.
269497	Unable to export a real circle to DXF.
270271	Copying and pasting a pad into the 'Custom Pad shape edit mode' does not allow you to save the shape.
270367	Elliptical Arc clearance isn't displayed until arc is completed.
270512	Copper area outside the board outline is not removed.
270534	Coordinates doesn't appear after exiting from the 3D viewer.
271327	"Convert Closed Objects To Filled" Is Not Working in some cases.
271508	Change shape command can cause DRC errors and broken boards.
273334	Density bars should take into account all pads.
273482	Keep in/keep out polygons should have polygon list accessible to user.
273495	Ultiboard incorrectly fills in power plane for odd board outline.
273531	The 3D view of a design is invalid in some cases.
273773	Drawing a polygon when polygon drawing is turned off should give some warning message.
273938	SOT23_3 produces DRC error upon placement.
273966	Forward annotation does not delete nets that aren't connected to a component prior to annotation.
274310	Vertices can be added/removed/changed for a locked polygon.
274311	Vertices can be added/removed from a locked polygon.
274312	A locked rectangle does not show the locked orange border.
274401	Copper area does not void board outline holes in some cases.
274603	Height information does not update in 3D view after placement from database.
274609	Moving land patterns from one database to another doesn't actually delete the data from the source database.
274790	Tool tip does not hide itself when Ctrl is released.
275064	Rectangle hole in pad resets its size when the part is rotated.
275508	Using High Contrast Black Wndows Theme settings makes some dialogs unreadable.
275540	Automatic Test Points are placed incorrect when keep-in areas are present in a design in some cases.
275558	Pin number information is missing from multi-section components if the components are not in the database when the file is loaded.
275603	DRC error not generated when copper polygon is not directly conntected to pins.
275671	Traces created with the Bezier and Arc tools are connected to a Copper Area.
275971	Description in status bar does not clear if menu is selected using keyboard.
277621	Removing Islands "Not Connected To Outer Edge" Is Deleting Islands Connected To Pads.
287628	The netbridge trace shorts with copper area in some cases.
291652	Passwords do not protect user/coorporate databases in Ultiboard.
299398	Undoing an action that added layers does not remove the layers.
301819	3d preview colours are incorrectly transferred between unrelated objects.
302143	Changing any values of the Attribute Properties during In-Place Edit breaks the properties dialog.
303316	Ultiboard netlist doesn't match with the schematic after forward annotation in some cases.
305667	Can't pan in Y direction when viewing 3D from directly overhead.
305704	Manually Assigned Via Disappears and produces DRC Errors.
308758	Switching trace layers causes Ultiboard to crash in some cases.
312095	Transfer to Ultiboard of Large Design causes Ultiboard to become unresponsive.
313380	Vertices of a placed circle can only be moved horizontally.
317483	DXF import ignores custom scaling factor.
321207	Locking a rectangle doesn't show the lock border.
323403	TO-3(K08A) Footprint Pins Are In Incorrect Positions.
326339	Board Outline Problem dialog allows entering negative numbers.

The following is a subset of the issues fixed between Circuit Design Suite 12.0 and Circuit Design Suite 12.0.0.1.

Multisim ( 3 )
Bug ID	Description
334101	Loading LabVIEW 2011 instruments crashes Multisim 12.0.
333932	Multisim COM interface unable to open Multisim 12 files.
336490	Multisim crashes on disconnect after creating a BOM when using the Multisim COM interface.
Ultiboard (2)
335190	Exporting Parts centroids for designs containing test points crashes Ultiboard.
337602	Ultiboard crashes when viewing certain files.

New Components

For information about new components, refer to the Database Improvements section of the release notes.

Notice Regarding Microsoft Silverlight Installation and RedistributionInstalling Microsoft Silverlight

Some NI components require Microsoft Silverlight. If you do not have Silverlight installed on your computer, but you do have Internet access, you can download the installer from Microsoft at http://www.microsoft.com/silverlight/. If you do not have Internet access, you can install Silverlight from this NI distribution media.

Using Microsoft Silverlight

You may not use any H.264/MPEG-4 AVC and/or VC-1 technology or codecs included in or with Microsoft Silverlight software which may be provided by NI as Third Party Software, including for the purpose of encoding or decoding video in compliance with, or making use of, the H.264/AVC visual standard or the VC-1 video standard.

Redistribution of Microsoft Silverlight

If you create and distribute software applications that contain NI components that also use Microsoft Silverlight, you may be authorized to include Silverlight in installers or on physical media as long as you comply with certain requirements. Refer to the notice.txt file in the \_Legal Information\Microsoft Silverlight 4.0 directory or the NI standard End User License Agreement (EULA) located in the \Common\MDF\EULADepot\NIReleased directory for more information.

---

Copyright

© 2012 National Instruments Corporation. All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

Trademarks

National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Electronics Workbench, Multisim and Ultiboard are trademarks of National Instruments. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks.

Other product and company names mentioned herein are trademarks or trade names of their respective companies.

The EKV MOST model used in this software was developed, implemented and tested by the Electronics Laboratory (LEG) of the Swiss Federal Institute of Technology (EPFL).

Patents

For patents covering the National Instruments products, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or ni.com/patents.