LabVIEW Communications Real-Time Target Image 2.0 Linux Real-Time OS English LabVIEW通信实时目标映像2.0

石鑫华视觉

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

LabVIEW Communications Real-Time Target Image 2.0 Linux Real-Time OS English LabVIEW通信实时目标映像2.0

LabVIEW Communications Real-Time Target Image
LabVIEW Communications Real-Time Target Images提供Linux Real-Time OS映像，可与LabVIEW Real-Time模块硬件搭配使用。
LabVIEW Communications Real-Time Target Image是一款应用软件，用于配置特定PXI控制器或USRP（通用软件无线电外设）设备，使其可支持LabVIEW Communications。借助该软件，即可将硬件转换为NI Linux Real-Time OS。注册商标Linux的使用获得了Linus Torvalds专属授权商LMI的再授权，Linus Torvalds拥有Linux注册商标在全球范围内的所有权。

LabVIEW Real-Time (NI Linux Real-Time) OS，English
2.0
文件大小: 399507456 字节 (381.00 MB)
修改日期: 2016-08-01 23:09
MD5: 5141c09b2e6056165541dac418bcc668
SHA1: 62dbf7f5396de1dd19f6d159f54330ceba98a43d
SHA256: 8cedb4b154e115b0e9bd2043d93008915936ab279feeb5493d27ccabfb4b88c9
CRC32: 9efdae0e

百度网盘与NI官方下载地址：
LVComms_LinuxRT2.0.txt (660 Bytes, 下载次数: 0, 售价: 10 元)

2021-2-24 23:43 上传

点击文件名下载附件

LabVIEW Communications System Design Suite 2.0 Readme

March 2016

This file contains important information about the LabVIEW Communications System Design Suite, including system requirements, known issues, and a partial list of bugs fixed for LabVIEW Communications System Design Suite 2.0. This file also applies to the LabVIEW Communications System Design Software and the NI Code Conversion Utility for LabVIEW Communications 2.0.

Overview

System Requirements

Real-Time Hardware Compatibility

Product Security and Critical Updates

Known Issues

Bug Fixes

Automating the Installation of NI Products

Using NI Software with Microsoft Windows 10

Using NI Software with Microsoft Windows 8.1

Legal Information

Overview

LabVIEW Communications System Design Suite is an integrated, hardware-aware design environment for prototyping communications systems.

To use code that you created with LabVIEW or earlier versions of the LabVIEW Communications System Design Suite with the LabVIEW Communications System Design Suite 2.0, refer to the following resources:

• LabVIEW 2009 or later—Use the NI Code Conversion Utility for LabVIEW Communications 2.0 to convert VIs, projects, and libraries into files that are compatible with the LabVIEW Communications System Design Suite and LabVIEW Communications System Design Software.
• LabVIEW Communications System Design Suite 1.1 or earlier—Refer to the NI website for a guide to migrating code to the LabVIEW Communications System Design Suite 2.0.
  

System Requirements

	Suite	Software
Operating System	Windows 7 SP1 (64-bit) Windows 8.1 (64-bit)	Windows 7 SP1 (64-bit) Windows 8.1 (64-bit) Windows 10 (64-bit)
Disk Space	15 GB	3 GB
RAM	8 GB	4 GB

Note: You must use Internet Explorer 9 or later to open links from LabVIEW Communications System Design Suite.

Real-Time Hardware Compatibility

The NI PXIe-8135 RT or NI PXIe-8880 RT controller you purchase with LabVIEW Communications 2.0 comes with a compatible version of Linux Real-Time.

To use an NI PXIe-8135 RT or NI PXIe-8880 RT controller that you did not receive with LabVIEW Communications 2.0, update the real-time controller to a compatible version of Linux Real-Time. Refer to the NI website for a guide to updating your real-time controller for use with LabVIEW Communications 2.0.

Product Security and Critical Updates

Visit ni.com/security to view and subscribe to receive security notifications about NI products. Visit ni.com/critical-updates for information about critical updates from NI.

Known Issues

You can access the software known issues list online. Refer to the NI website for an up-to-date list of known issues in the LabVIEW Communications System Design Suite.

Documentation Known Issues

Online Node Reference Topics Don't Reflect Real-Time Compatibility—The Compatibility tab for nodes that run on a real-time Linux operating system do not reflect that compatibility. However, when you target a VI to a real-time controller in SystemDesigner, you only have access to nodes that can run on the real-time controller.

Bug Fixes

The following items are the IDs and titles of a subset of issues fixed in the LabVIEW Communications System Design Suite 2.0. This is not an exhaustive list of issues fixed in the current version of the LabVIEW Communications System Design Suite. If you have a CAR ID, you can search this list to validate that the issue has been fixed.

ID	Fixed Issue
507482	The IIR Filter FPGA IP Example Does Not Run on Hardware
507503	FPGA Host Interface Example Returns Wrong Value in Indicator for USRP
513672	Chart Probe and Numeric Probe do not Work Correctly on Multirate Diagram with Disaggregate/Aggregate Nodes
517226	Crash with Multirate Diagram and Chart Probe After Disaggregate Node Set to 1 Output Chunk
527093	Switching Targets in the IIR Example Can Cause the Application to Crash
549417	Selective Diagram Clean Up Does Not Work
557244	LabVIEW Communications Multirate Diagram with Chart Probe Crashes with Ctrl+R
563578	The Reed Solomon Encoding and Decoding Nodes Return Error -1 Regardless of Input
572656	Compiling a Single Multirate Diagram as a SubMRD Causes a Compilation Error
576661	Multirate Diagram Does Not Estimate Throughput Correctly if Single Wire is Branched Into Both Inputs of Multiply Node

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.

LabVIEW Communications System Design Suite uses Microsoft .NET 4.5.1. The .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.5.1 or later separately before you install NI software.

For more information about automating the installation of NI products, refer to the following articles on ni.com:

• For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
• For more information on silent installations of suited NI products, such as LabVIEW Communications System Design Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
• To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
  

Using NI Software with Microsoft Windows 10

Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.

Using NI Software with Microsoft Windows 8.1

When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.

---

Legal Information

Copyright

© 2014-2016 National Instruments. All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

End-User License Agreements and Third-Party Legal Notices

You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:

• Notices are located in the \_Legal Information and directories.
• EULAs are located in the \Shared\MDF\Legal\license directory.
• Review \_Legal Information.txt for information on including legal information in installers built with NI products.
  

U.S. Government Restricted Rights

If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 for military agencies.

IVI Foundation Copyright Notice

Content from the IVI specifications reproduced with permission from the IVI Foundation.

The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

Trademarks

Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Xilinx® is a registered trademark of Xilinx, Inc. Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the NI products/technology, refer to the appropriate location: the patents.txt file on your media or the National Instruments Patent Notice at ni.com/patents.

376333A-01