NI ELVISmx 4.4 Driver Win32Eng NI ELVISmx设备驱动软件4.4下载

石鑫华视觉

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

NI ELVISmx 4.4 Driver Win32Eng NI ELVISmx设备驱动软件4.4下载

NI ELVISmx
NI-ELVISmx为使用NI ELVIS II和NI ELVIS II +以及myDAQ学生数据采集设备的客户提供支持。
NI-ELVISmx是支持NI ELVIS II、NI ELVIS II +和myDAQ设备的驱动软件。NI-ELVISmx包括NI ELVISmx Instrument Launcher、LabVIEW Express VI和编程NI ELVIS II/II+硬件的SignalExpress步骤。

Win32Eng
4.4
文件大小: 1692945648 字节 (1.58 GB)
修改日期: 2019-06-25 03:08
MD5: ac3e12f7bc9109f7315e845523078bed（官方正确）
SHA1: d57e1522a7d989da05a09aff8a058bd308dde4d3
SHA256: 907a706eeed6f9c83f5826ffbb35e2a7361c18aa7cd0398940c7a8950e806ed0
CRC32: 18a7bf3d

百度网盘和NI官方下载地址：
ELVISmx4.4.0.txt (596 Bytes, 下载次数: 0, 售价: 10 元)

2020-12-29 23:16 上传

点击文件名下载附件

NI ELVISmx 4.4 Readme

June 2012

This file contains important information about the NI ELVISmx software and is organized into the following sections:

Operating System Support

Software Requirements

What's New

Using the Instruments in Manual Mode

Documentation

Known Issues

Fixed Issues

Automating the Installation of NI Products

The NI ELVISmx driver provides driver support for NI ELVIS II series hardware and NI myDAQ. Refer to ni.com/downloads for the latest information about the NI ELVISmx driver.

For more information on how to get started with NI ELVIS II series, visit ni.com/nielvis. Visit ni.com/mydaq for materials related to NI myDAQ.

Note:  NI ELVISmx driver software does not support Legacy NI ELVIS workstations. National Instruments recommends NI ELVIS II/II+ programmed with NI ELVISmx driver software for new applications. Refer to ni.com/downloads for the NI ELVIS Software driver for Legacy ELVIS workstations.

---

Operating System Support

The following operating systems are supported in NI ELVISmx 4.4:

• Windows 7 (32-bit and 64-bit)*
• Windows Vista Business edition, Service Pack (SP) 1 or greater (32-bit and 64-bit)*
• Windows XP, SP3 or greater
• Windows Server 2003 R2, SP2 or greater (32-bit)
• Windows Server 2008 R2, SP1 or greater (64-bit, not supported on Server Core Role)*
• Windows Server 2008 (64-bit, not supported on Server Core Role)*
  

* NI ELVISmx is not supported in LabVIEW (64 bit). To use LabVIEW with NI ELVISmx on a Windows 7/Vista (64 bit) operating system, you must have LabVIEW (32 bit) installed.

Back to Top

---

Software Requirements

You must have NI-DAQmx 9.5.5 or later installed to use NI ELVISmx 4.4. NI ELVISmx 4.4 installs NI-DAQmx 9.5.5 by default. NI ELVISmx 4.4 is used with LabVIEW 2009 or later. If you are using LabVIEW SignalExpress, you must use version 3.0 or later.

Note: Because several of the NI ELVISmx instruments run the device at maximum speed, NI ELVIS II Series and NI myDAQ devices must be used with Hi-Speed USB interfaces.

Back to Top

---

What's New

NI ELVISmx Instrument Launcher has added new features to extend the functionality of the NI ELVISmx user interface and functionality, including the following:

• Soft Front Panel instruments can now auto-detect hardware devices that are added, removed, or renamed while the SFP instrument is open.
• Digital Waveform Viewer added to NI ELVISmx Instrument Launcher Featured Instruments tab.
• My Files folder directory can now be opened from the My Files tab on the NI ELVISmx Instrument Quick Launcher.
  

NI ELVISmx 4.4 includes support for LabVIEW 2012.

Back to Top

---

Using the Instruments in Manual Mode (NI ELVIS II Series Only)

The Variable Power Supplies and Function Generator can be set to Manual mode or Software mode by using their associated Soft Front Panel Instruments, Express VIs, or SignalExpress Steps. In Manual mode, the knobs on the NI ELVIS II Series Workstation control the instrument outputs.

Back to Top

---

Documentation

The following list describes the documentation that installs with NI ELVISmx:

• Where to Start with NI ELVIS II Series—This document includes important installation and configuration instructions you should read before using the NI ELVISmx software and NI ELVIS II Series hardware.
• NI Educational Laboratory Virtual Instrumentation Suite II Series (NI ELVIS II Series) User Manual—This user manual provides more detailed information about the NI ELVIS II Series hardware, including specifications and safety information.
• NI ELVIS II Series Specifications—This document lists the hardware specifications for the NI ELVIS II series devices.
• NI myDAQ User Guide and Specifications—This user guide provides more detailed information about the NI myDAQ hardware, including specifications and safety information.
• NI ELVISmx Help—This help file provides information about the soft front panel (SFP) instruments and the LabVIEW Express VIs that you may need while using the software.
• LabVIEW SignalExpress Help—This help file contains instructions for designing measurement projects using the NI ELVISmx steps in SignalExpress.
• Using NI ELVISmx Instruments in NI Multisim—This help file explains how to use NI ELVISmx instruments in NI Multisim to simulate data, acquire data from hardware, and compare simulated and acquired data.
  

To download the latest NI ELVISmx documentation, refer to ni.com/manuals.

Back to Top

---

Fixed Issues

The following issues were fixed in this release of NI ELVISmx driver software.

CAR ID	Summary
241313	Open NI ELVISmx soft front panel instruments cannot automatically detect when a device has been removed, changed, or renamed.
326437	The Function Generator on the NI ELVIS II series device continues to run when the Bode Analyzer SFP is stopped after running.

Back to Top

---

Known Issues

• When using NI ELVISmx SFPs, controls can disable/enable incorrectly and/or contain incorrect values when an invalid device is selected. A device becomes invalid when it is disconnected from the PC while the SFP Device control drop-down dialog is open. If the disconnected device is selected from the drop-down control and then reconnected, the SFP controls may not update correctly. Selecting the device again from the SFP Device control corrects the issue.
• When loading a Multisim design saved in NI ELVISmx 4.0 and configured for a NI ELVIS II+ or Simulated NI ELVIS II+ hardware device, some controls in the Oscilloscope SFP may lose saved values. Change the device in the SFP to a non-ELVIS II+ device, and select your ELVIS II+ device again to correct the issue.
• Open NI ELVISmx soft front panel instruments cannot be removed, changed, or renamed when the SFP is running..
• Scope Zoom has been hidden. You can enable it using the steps outlined in the KB document, KB 4T5GG7HF: How Do I Display the Zoom Controls on the NI ELVISmx Scope Soft Front Panel?. To access this document, go to ni.com/info and enter the Info Code exh3ma.
• The NI ELVIS II Series device must be plugged into the system and powered on before launching the NI ELVISmx Express VIs and SignalExpress steps in order for it to be recognized by the software. If the device is plugged in after the software is launched, close the software application and relaunch it.
• NI ELVIS II Series hardware is supported by NI ELVISmx 4.0 and later. The original NI ELVIS hardware is not supported. If you are unsure which version you have, "NI ELVIS II" or "NI ELVIS II+" is labeled on the NI ELVIS II Series device itself. The original NI ELVIS is labeled "NI ELVIS."
• Some NI ELVISmx instruments are not supported by NI myDAQ. For more information on NI ELVISmx instrument support, refer to the NI ELVISmx Help.
• When running the NI ELVISmx Express VIs continuously in a loop, wire the Stop input of the Express VI to the Stop control of the loop for optimal performance.
• In LabVIEW SignalExpress, if you drag NI ELVISmx steps data into the SignalExpress Data view, the graph axes always default to voltage versus time. If you want to change these defaults (for instance, to current versus voltage), you must manually change the labels on the graph.
  

Back to Top

---

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.

If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.

For more information, refer to the following KnowledgeBase articles:

• For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
• For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
• To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
  

Back to Top

---

Important Information

Copyright

© 2003–2012 National Instruments Corporation. All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

End-User License Agreements and Third-Party Legal Notices

You can find end-user license agreements (EULAs) and third-party legal notices in the following locations:

• Notices are located in the \_Legal Information and directories.
• EULAs are located in the \Shared\MDF\Legal\license directory.
• Review \_Legal Information.txt for information on including legal information in installers built with NI products.
  

Trademarks

LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments Corporation. Refer to the Trademark Information at ni.com/trademarks for other National Instruments trademarks.

Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.