NI ELVISmx 4.2.3 Driver Win32Eng NI ELVISmx设备驱动软件4.2.3下载

石鑫华视觉

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

NI ELVISmx 4.2.3 Driver Win32Eng NI ELVISmx设备驱动软件4.2.3下载

NI ELVISmx
NI-ELVISmx为使用NI ELVIS II和NI ELVIS II +以及myDAQ学生数据采集设备的客户提供支持。
NI-ELVISmx是支持NI ELVIS II、NI ELVIS II +和myDAQ设备的驱动软件。NI-ELVISmx包括NI ELVISmx Instrument Launcher、LabVIEW Express VI和编程NI ELVIS II/II+硬件的SignalExpress步骤。

Win32Eng
4.2.3
文件大小: 1180930164 字节 (1.10 GB)
修改日期: 2019-06-25 03:08
MD5: 9327f7b42be5e4181db46f9edbbdeffa（官方正确）
SHA1: 086128203ef90e826e7d28a9d7cae67540ec4c68
SHA256: 4cc70b1c4c8d934e80c14ab49c84e4254c1cb810bd23af2153b99d804e4cdaa9
CRC32: 0672d5dc

百度网盘和NI官方下载地址：
ELVISmx4.2.3.txt (593 Bytes, 下载次数: 0, 售价: 10 元)

2020-12-29 23:13 上传

点击文件名下载附件

NI ELVISmx 4.2.3 Readme

September 2010

This file contains important information about the NI ELVISmx software and is organized into the following sections:

Operating System Support

Software Requirements

What's New

Using the Instruments in Manual Mode

Documentation

Known Issues

The NI ELVISmx driver provides driver support for NI ELVIS II series hardware and NI myDAQ. Refer to ni.com/downloads for the latest information about the NI ELVISmx driver.

For more information on how to get started with NI ELVIS, visit ni.com/nielvis. Visit ni.com/mydaq for materials related to NI myDAQ.

---

Operating System Support

The following operating systems are supported in NI ELVISmx 4.2.3:

• Windows 7 (32-bit and 64-bit)*
• Windows Vista Business edition (32-bit and 64-bit)*
• Windows XP, Service Pack 2 or greater (32-bit)
• Windows Server 2003 R2 (32-bit)
• Windows Server 2008 R2 (64-bit)
  

* NI ELVISmx is not supported in LabVIEW (64 bit). To use LabVIEW with NI ELVISmx on a Windows 7/Vista (64 bit) operating system, you must have LabVIEW (32 bit) installed.

Back to Top

---

Software Requirements

You must have LabVIEW 8.5 or later and NI-DAQmx 9.1.7 or later installed to use NI ELVISmx 4.2.3 or later. NI ELVISmx 4.2.3 installs NI-DAQmx 9.1.7 by default. If you are using LabVIEW SignalExpress, you must use version 3.0 or later.

Note: Because several of the NI ELVISmx instruments run the device at maximum speed, NI ELVIS II Series and NI myDAQ devices must be used with Hi-Speed USB interfaces.

Back to Top

---

What's New

NI ELVISmx 4.2.3 adds support for NI myDAQ hardware.

NI ELVISmx 4.2.3 has added support for LabVIEW 2010.

Back to Top

---

Using the Instruments in Manual Mode (NI ELVIS II Series Only)

The Variable Power Supplies and Function Generator can be set to Manual mode or Software mode by using their associated Soft Front Panel Instruments, Express VIs, or SignalExpress Steps. In Manual mode, the knobs on the NI ELVIS II Series Workstation control the instrument outputs.

Back to Top

---

Documentation

The following list describes the documentation that installs with NI ELVISmx:

• Where to Start with NI ELVIS II Series—This document includes important installation and configuration instructions you should read before using the NI ELVISmx software and NI ELVIS II Series hardware.
• NI Educational Laboratory Virtual Instrumentation Suite II Series (NI ELVIS II Series) User Manual—This user manual provides more detailed information about the NI ELVIS II Series hardware, including specifications and safety information.
• NI myDAQ User Guide and Specifications—This user guide provides more detailed information about the NI myDAQ hardware, including specifications and safety information.
• NI ELVISmx Help—This help file provides information about the soft front panel (SFP) instruments and the LabVIEW Express VIs that you may need while using the software.
• LabVIEW SignalExpress Help—This help file contains instructions for designing measurement projects using the NI ELVISmx steps in SignalExpress.
• Using NI ELVISmx Instruments in NI Multisim—This help file explains how to use NI ELVISmx instruments in NI Multisim to simulate data, acquire data from hardware, and compare simulated and acquired data.
  

To download the latest NI ELVISmx documentation, refer to ni.com/manuals.

Back to Top

---

Known Issues

• The Vertical Offset and 20 MHz Filter controls are supported only for NI ELVIS II+ devices when using the NI ELVISmx Oscilloscope Express VI. This feature is not supported for NI ELVIS II or NI myDAQ devices
• Scope Zoom has been hidden. You can enable it using the steps outlined in the KB document, KB 4T5GG7HF: How Do I Display the Zoom Controls on the NI ELVISmx Scope Soft Front Panel?. To access this document, go to ni.com/info and enter the info code exh3ma.
• The NI ELVIS II Series device must be plugged into the system and powered on before launching the NI ELVISmx Soft Front Panel Instruments, Express VIs and SignalExpress steps in order for it to be recognized by the software. If the device is plugged in after the software is launched, close the software application and relaunch it.
• NI ELVIS II Series hardware is supported by NI ELVISmx 4.0 and later. The original NI ELVIS hardware is not supported. If you are unsure which version you have, "NI ELVIS II" or "NI ELVIS II+" is labeled on the NI ELVIS II Series device itself. The original NI ELVIS is labeled "NI ELVIS."
• Some NI ELVISmx instruments are not supported by NI myDAQ. For more information on NI ELVISmx instrument support, refer to the NI ELVISmx Help.
• When running the NI ELVISmx Express VIs continuously in a loop, wire the Stop input of the Express VI to the Stop control of the loop for optimal performance.
• In LabVIEW SignalExpress, if you drag NI ELVISmx steps data into the SignalExpress Data view, the graph axes always default to voltage versus time. If you want to change these defaults (for instance, to current versus voltage), you must manually change the labels on the graph.
  

---

---

Important Information

Copyright

© 2003–2010 National Instruments Corporation. All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

For copyright notices, conditions, and disclaimers, including information regarding certain third-party components used in NI ELVISmx, refer to the Copyright topic of the NI ELVISmx Help.

Trademarks

LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments Corporation. Refer to the Trademark Information at ni.com/trademarks for other National Instruments trademarks.

Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.