NI CompactRIO 15.0 Win32 Eng/Jpn/Chn设备驱动程序完整版下载NICRIO2015Aug

石鑫华视觉

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

NI CompactRIO 15.0 Win32Eng/Jpn/Chn设备驱动程序完整版下载NICRIO2015Aug

NI CompactRIO
NI CompactRIO支持CompactRIO控制器、CompactRIO机箱和CompactRIO单板控制器。
NI CompactRIO是一个驱动软件，用于支持CompactRIO系统的识别、编程和部署。除LabVIEW之外，您还必须安装此驱动程序以及LabVIEW Real-Time模块和/或LabVIEW FPGA模块才能开始编程硬件。

15.0
文件大小: 3603470931 字节 (3.36 GB)
修改日期: 2015-08-01 04:09
MD5: ce4db8bc6eaa78aea4e088b85934eabe（官方正确）
SHA1: c4c68dcdaf70ea3569078e4044c23b2fedb21fa5
SHA256: 855ed518badf44f025dcacd8a83704a8e09eee6c77c463490401af4c6b0fe8d5
CRC32: bad70634

NICRIOWin15.0.txt (291 Bytes, 下载次数: 3, 售价: 10 元)

2020-10-28 22:25 上传

点击文件名下载附件

NI CompactRIO Device Drivers August 2015 Readme

August 2015

This document contains important information about installing NI CompactRIO Device Drivers August 2015, descriptions of known issues for installing and using NI CompactRIO Device Drivers August 2015, and information about the hardware and software that NI CompactRIO Device Drivers August 2015 supports.

• Installing NI CompactRIO Device Drivers August 2015
• What's New in NI CompactRIO Device Drivers August 2015
• Preserving Device Aliases when Upgrading to NI CompactRIO Device Drivers August 2015
• Driver Version Naming Changes
• Bug Fixes
• Known Issues
• Accessing the Help
• Supported Platforms
• Supported Hardware and Software
• Product Security and Critical Updates
• Automating the Installation of NI Products
• Using NI Software with Microsoft Windows 10
• How to Use NI Software with Microsoft Windows 8.1/8.0
• NI CompactRIO Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016
• Legal Information
  

---

Installing NI CompactRIO Device Drivers August 2015

Note  This installation requires at least 2 GB of RAM in addition to the requirements for LabVIEW, the LabVIEW Real-Time Module, and the LabVIEW FPGA Module.

Complete the following steps to install NI CompactRIO Device Drivers August 2015 for use with LabVIEW.

• Install one of the following supported versions of LabVIEW:
  
  • LabVIEW 2015
  • LabVIEW 2014 SP1
  • LabVIEW 2013 SP1
  • LabVIEW 2012 SP1
    
• Install the LabVIEW Real-Time Module.
• Install the LabVIEW FPGA Module.
• Install NI CompactRIO Device Drivers August 2015.
  

↑ Back to Top

---

What's New in NI CompactRIO Device Drivers August 2015

• Support for the following new hardware in LabVIEW 2015:
  
  • Single-Board RIO Devices—NI sbRIO-9607, NI sbRIO-9627, NI sbRIO-9637
    
• Scan Interface support for the following C Series modules:
  
  • NI 9220
  • NI 9222
  • NI 9223
  • NI 9242
  • NI 9244
  • NI 9437
    
  
  

↑ Back to Top

---

Preserving Device Aliases when Upgrading to NI CompactRIO Device Drivers August 2015

Ensure that you back up any aliases for local RIO devices before you upgrade the software on your system, or ensure that the devices remain connected to the system during the upgrade. Any local aliases that are not associated with a connected device might be removed during the upgrade.

↑ Back to Top

---

Driver Version Naming Changes

NI CompactRIO versions are now aligned with the versions of major NI application software products. This alignment gives you information about the year the driver was released and the most recent software version the driver was designed to work with.

Driver versions now start with a two-digit year indicator: <;ProductName>. For example, NI CompactRIO 15.0 is the version released with LabVIEW 2015.

The last version released under the old numbering scheme is NI CompactRIO 4.1. The first version released under the new numbering scheme is NI CompactRIO 13.0.

↑ Back to Top

---

Bug Fixes

Refer to the List of Known Issues and Bug Fixes for NI-RIO Device Drivers on ni.com for a list of bug fixes in this release.

↑ Back to Top

---

Known Issues

Refer to the List of Known Issues and Bug Fixes for NI-RIO Device Drivers on ni.com for a current list of all known issues in this release.

↑ Back to Top

---

Accessing the Help

In the LabVIEW Help, click the Contents tab and select NI CompactRIO Device Drivers to access the software help for your NI CompactRIO device.

↑ Back to Top

---

Supported Platforms

Use the following Microsoft Windows operating systems and service packs with NI CompactRIO Device Drivers August 2015.

Operating System	64-bit	32-bit	Comments
Windows 10	✓	✓	Refer to the Using NI Software with Microsoft Windows 10 section of this document for more information about NI CompactRIO on Windows 10.
Windows 8.1/8.0	✓	✓	Refer to the How to Use NI Software with Microsoft Windows 8.1/8.0 section of this document for more information about NI CompactRIO on Windows 8.1/8.0.
Windows 7 Professional	✓	✓	—
Windows Vista Business	✓	✓	Refer to the NI CompactRIO Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016 section of this document for more information about NI CompactRIO support for those versions.
Windows XP Professional SP3	—	✓
Windows Server 2012 R2	✓	—	—
Windows Server 2008 R2	✓	—	—
Windows Server 2003 R2	—	✓	Support for Windows Server 2003 R2 may require disabling physical address extensions (PAE). To learn how this might affect your use of Windows Server 2003 and what actions you might have to take, visit ni.com/info and enter the info code PAESupport.

↑ Back to Top

---

Supported Hardware and Software

Refer to the Software Support for CompactRIO, CompactDAQ, Single-Board RIO, R Series, FlexRIO, and EtherCAT support document on ni.com for a complete list of the hardware and LabVIEW software versions supported by each version of NI CompactRIO.

Visit to ni.com/compactrio for additional NI CompactRIO product support and information.

↑ Back to Top

---

Product Security and Critical Updates

Visit ni.com/security to view and subscribe to receive security notifications about National Instruments products. Visit ni.com/critical-updates for information about critical updates from National Instruments.

↑ Back to Top

---

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.

If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.

For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:

• For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
• For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to KB 4GGGDQH0, How Do I Automate the Installation of a Suited Installer?.
• To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
  

↑ Back to Top

---

Using NI Software with Microsoft Windows 10

Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.

↑ Back to Top

---

How to Use NI Software with Microsoft Windows 8.1/8.0

When you install National Instruments software on Microsoft Windows 8.1/8.0, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher.

Using NI Launcher

NI Launcher helps you find and launch installed NI products. It provides you with a method of finding NI products similar to the Start menu in previous versions of Microsoft Windows. To use NI Launcher, click the NI Launcher tile in the Apps view. NI Launcher launches the desktop and opens a menu containing a list of NI products. Click any NI product to launch it.

Note  NI MAX does not appear as a desktop shortcut when installed on Microsoft Windows 8.1/8.0. You can launch NI MAX either from the Apps view or from within NI Launcher.

Pinning Frequently Used Applications

For convenience, you can pin your most-used NI applications, such as MAX, to either the Start screen or the Taskbar on the desktop, as necessary:

Current Application	Icon Location	Pin to Action
Windows 8.1/8.0 Desktop	Desktop Taskbar	Right-click application and select Pin to Taskbar
Windows 8.1/8.0 Desktop	Start screen	Right-click application and select Pin to Start
Windows 8.1/8.0 Start screen	Desktop Taskbar	Right-click application and select Pin to taskbar from the menu bar on the bottom of the screen

Finding All Programs

If you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files from the Apps view. To get to the Apps view, right-click anywhere on the Start screen and select All apps (Windows 8.0) or click the down arrow on the bottom left of the screen (Windows 8.1).

For more information about NI support for Windows 8.1/8.0, visit ni.com/windows8.

↑ Back to Top

---

NI CompactRIO Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016

NI CompactRIO will drop support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 as of July 1, 2016. Versions of NI CompactRIO that ship after July 1, 2016 will not install or run on Windows Vista, Windows XP, or Windows Server 2003. For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:

Product	Info Code
LabVIEW	lifecycle
LabWindows™/CVI™	cvi_lifecycle
Measurement Studio	mstudiolifecycle
TestStand	tslcp
DIAdem	ddlcp
SignalExpress	selcp
VeriStand	nivslifecycle

↑ Back to Top

---

Legal Information

Copyright

© 2004–2015 National Instruments. All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

End-User License Agreements and Third-Party Legal Notices

You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:

• Notices are located in the \_Legal Information and directories.
• EULAs are located in the \Shared\MDF\Legal\license directory.
• Review \_Legal Information.txt for information on including legal information in installers built with NI products.
  

U.S. Government Restricted Rights

If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 for military agencies.

IVI Foundation Copyright Notice

Content from the IVI specifications reproduced with permission from the IVI Foundation.

The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

Trademarks

Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.

375022B-01