NI-DCPower Driver 1.1 Win32/64Eng NI DC电源仪器驱动程序下载1.1

石鑫华视觉

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

NI-DCPower Driver 1.1 Win32/64Eng NI DC电源仪器驱动程序下载1.1

NI-DCPower
NI-DCPower为使用NI DC电源和源测量单元(SMU)的客户提供支持。
NI-DCPower是与所有NI可编程电源和SMU进行通信必需的NI仪器驱动程序。NI-DCPower是一种可兼容可互换虚拟仪器(IVI)的仪器驱动程序，提供一系列操作和属性，可以执行波形或信号发生器的功能，并包含交互式软件前面板和示例。

1.1
文件大小: 562946291 字节 (536.87 MB)
修改日期: 2010-04-25 04:00
MD5: f8dd366ea9f11f962902c52fff6773e0（官方正确）
SHA1: bdd566f96c095742a954c5b46bcab8b6caf1fa09
SHA256: a8e93a1793089e7a532d02cd64164eba2419a36659e96ef1934478a447badc2f
CRC32: 455bf346

DCPower1.1.txt (260 Bytes, 下载次数: 0, 售价: 10 元)

2020-10-16 23:34 上传

点击文件名下载附件

NI-DCPower Readme

National Instruments™, NI™, ni.com™ and LabVIEW™ are trademarks of National Instruments Corporation. Product and company names mentioned herein are trademarks or trade names of their respective companies.

© Copyright 2006 National Instruments Corporation. All rights reserved.

Version 1.1

---

Thank you for using NI-DCPower.

This file contains important information about NI-DCPower and is organized into the following sections:

• New Features in Version 1.1
• Supported Hardware
• System Requirements
• Installed File Names and Locations
  
  • Software
  • Documentation
    
• Uninstalling/Modifying NI-DCPower
• Examples
• Known Issues
• Changes by Release
  

---

New Features in Version 1.1

• LabVIEW Real-Time support
• Device simulation support
  

Supported Hardware

NI-DCPower 1.1 and later supports the following power supply:

• NI PXI-4110
  

System RequirementsMinimum System

• Processor—Pentium 200 MHz or equivalent
• RAM—64 MB
• Microsoft Internet Explorer 5.5 or later
• A screen resolution of 800×600 with 256 colors
• Windows 2000/XP, with all available critical updates and service packs
  

Recommended System

• Processor—Pentium III/Celeron 600 MHz or equivalent
• RAM—256 MB
• A screen resolution of 1024×768
  

Application Development Environments (ADEs)

• LabVIEW 7.1 or later
• LabVIEW Real-Time Module 7.1.1 or later
• LabWindows™/CVI™ 7.0 or later
• LabWindows™/CVI™ Real-Time Module
• Microsoft Visual C++ (MSVC) 6.0 or later
• Microsoft Visual Basic 6.0
  

Installed File Names and LocationsSoftware

Item	Installed Location
NI-DCPower	Program Files\IVI\Drivers\niDCPower
Documentation	Program Files\IVI\Drivers\niDCPower\Documentation\
NI-DCPower LabVIEW support	\instr.lib\niDCPower
NI-DCPower LabVIEW Examples	\examples\instr\niDCPower
NI-DCPower CVI 7.0 or later support	Program Files\IVI\Drivers\niDCPower
NI-DCPower CVI Examples	\samples\niDCPower
NI-DCPower VB Examples	Program Files\IVI\Drivers\niDCPower\Examples\VisualBasic
NI-DCPower Test Panel	Program Files\IVI\Drivers\niDCPower
LabVIEW Run-Time Engine 8.0	Program Files\National Instruments\Shared\LabVIEW Run-Time\7.1
NI-DAQmx 8.3	Program Files\National Instruments\NI-DAQ
IVI Compliance Package 2.5	Program Files\National Instruments\IVI
NI-VISA 4.0	WINDOWS\system32

Documentation

Documentation is available at Start»All Programs»National Instruments»NI-DCPower»Documentation. The documentation set is composed of the following documents:

• NI-DCPower Readme
• NI DC Power Supplies Getting Started Guide
  Printed and PDF format. Includes hardware and software installation, MAX configuration, and signal connection information.
• NI DC Power Supplies Help
  HTML help format. Includes power supply fundamentals, hardware device overview, programming information, LabVIEW reference, and C/CVI/VB reference sections.
• NI PXI-4110 Specifications
  Printed and PDF format. Lists specifications for the NI PXI-4110 triple-output, programmable DC power supply.
• NI PXI-4110 Calibration Procedure
  PDF format. Includes calibration instructions for the NI PXI-4110.
• Maintain Forced-Air Cooling Note to Users
  Printed format. Includes important cooling information for NI DC power supplies.
• Readme First: Safety and Radio-Frequency Interference
  Printed format. Includes safety instructions and information about the radio-frequency interference characteristics of the hardware it accompanies.
  
  

Uninstalling/Modifying NI-DCPower

For Windows 2000/XP, complete the following steps to uninstall or modify NI-DCPower:

• Open the Control Panel from the Start»Control Panel Menu and select Add or Remove Programs.
• Select National Instruments Software from the list provided and click Change or Remove.
• Select NI-DCPower 1.1 from the list provided and choose Modify or Remove.
  

Examples

Refer to Start»All Programs»National Instrument»NI-DCPower»Examples for the examples for the supported ADEs.

Refer to the Installed File Names and Locations section for the installed locations of the example sets.

Known Issues

• Accessing the NI-DCPower API in LabVIEW 7.x
  
  • (LabVIEW 7.x) From the Functions palette, select All Functions»Instrument I/O»Instrument Drivers»NI-DCPower.
  • (LabVIEW 8.0 or later) From the Functions palette, select Measurement I/O»NI-DCPower.
    
• SignalExpress 1.1.1 and the IVI Power Supply step
  

The IVI Power Supply step does not support NI-DCPower in Signal Express 1.1.1. Use the native NI-DCPower Express step to access NI-DCPower from within SignalExpress 1.1.1.

Changes by Release1.1 from 1.0

• Support for LabView Real-Time and device simulation.