石鑫华视觉论坛微信公众号:石鑫华视觉

 找回密码
 注册会员
查看: 3293|回复: 0

[NI软件产品] NI Vision Builder for Automated Inspection 2.0 Win32Eng 自动化检测视觉生成器VBAI2.0

[复制链接]
  • TA的每日心情
    慵懒
    9 小时前
  • 签到天数: 3156 天

    连续签到: 26 天

    [LV.Master]2000FPS

    发表于 2020-2-4 10:43:39 | 显示全部楼层 |阅读模式 来自:广东省东莞市 联通

    注册登陆后可查看附件和大图,以及购买相关内容

    您需要 登录 才可以下载或查看,没有账号?注册会员

    x
    Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件、模块、工具包、驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Activator来激活:NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

    视觉论坛的各种NI资源,除了视觉相关的模块有使用外,大部分的都不会使用,仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址,只能使用百度网盘地址;如果百度网盘地址失效过期,可联系论坛客服更新。NI的服务器在美国,有时候速度很慢或下载容易出错,这样会造成安装时各种错误而无法安装。建议在下载完成后,对下载资源做校验和(NI一般会提供MD5或SHA256等)验证,与官方或视觉论坛提供的校验和对比,一致就可以安装;如不一致,则需要重新下载。视觉论坛早期下载上传的资源,基本上都是正常下载的资源;2019后下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘。校验和工具下载地址:文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

    NI Vision Builder for Automated Inspection 2.0 Win32Eng 自动化检测视觉生成器VBAI2.0
    VBAI2.0 自动化检测视觉生成器,标准图像处理软件,Windows系统32位英文版本。2003年发布,NI Vision Builder AI与LabVIEW7同期。

    百度网盘下载地址:
    VBAI2.0.txt (194 Bytes, 下载次数: 1, 售价: 100 元)


    NationalInstruments Vision Builder for Automated Inspection

    Copyright2003, National Instruments Corporation.
    All rightsreserved.


    Readme.wri file for Vision Builder for Automated Inspection 2.0


    General Information

    1) This version of NI Vision Builder for AutomatedInspection (Vision Builder AI) runs on Windows 2000/NT/XP/Me/98. If you areusing Windows NT 4.0, you must have Service Pack 6 or higher installed on yourcomputer to run Vision Builder AI.

    2) Vision Builder AI requiresMicrosoft Internet Explorer 5.0 or higher. Go to www.microsoft.com to download Microsoft Internet Explorer.

    3) Vision Builder AI requires aminimum screen resolution of 1024 x 768 and a 16-bit (65536 colors) displayminimum. National Instruments recommends a 24- or 32-bit display.

    4) Perform the following steps toinstall Vision Builder AI:

    Note:To install Vision Builder AI on a Windows 2000/NT/XP system, you must be loggedin with administrator privileges.

    a.Insert the Vision Builder AI CD into your computer. If the CD startup screendoes not appear, use Windows Explorer to run the Setup.exe program from the Vision Builder AI CD.
    b.Follow the setup instructions on your screen.

    5) The Vision Builder AI installercreates the following directory structure under the Vision Builder AI 2.0directory:

    ·        Program and support files
    ·        Pluginsfolder - Additional support files
    ·        DemoImgfolder - Sample images
    ·        Products folder - Product inspection files
    ·        Helpfolder - Vision Builder AI online help files
    ·        Manualsfolder - Portable Document Format (PDF) versions of the release notes and NIVision Builder for Automated Inspection Tutorial. You must have AcrobatReader installed to use these documents.
    ·        RT Images - Software components required to run Vision Builder Server on an NI 1450Series Compact Vision System.


    National InstrumentsDevice Support

    1) This version of Vision Builder AIsupports the following National Instruments IMAQ devices:

    IMAQPXI/PCI-1407
    IMAQPXI/PCI-1409
    IMAQPXI/PCI-1411
    IMAQPXI/PCI-1422
    IMAQPCI-1424
    IMAQPCI-1428

    Note: If you are using an IMAQ device,you must install NI-IMAQ version 2.5.1 or later before you install the IMAQdevice. The NI-IMAQ 2.5.1 driver software gives you access to Measurement &Automation Explorer (MAX), which is software you can use to configure NationalInstruments devices.

    2) This version of Vision Builder AIsupports the NI 1450 Series Compact Vision System.

    Note: You must install version 1.5 orhigher of the NI-IMAQ for IEEE 1394 Cameras driver software to use VisionBuilder AI with the NI 1450 Series Compact Vision System.

    3) This version of Vision Builder AIsupports static digital I/O from any National Instruments device using MAXchannels. To support NI digital output devices, Vision Builder AI requiresNI-DAQ driver software version 6.9.2 or higher.

    Use MAX to create DAQ virtualchannels. For information about creating DAQ channels, refer to the Creatinga DAQ Channel topic in NI Vision Builder for Automated Inspection:Configuration Help.

    3) If you want to use Firewireindustrial digital video cameras with Vision Builder AI, you need NI-IMAQ forIEEE 1394 Cameras driver software version 1.1 or higher. To purchase thisdriver software, go to ni.com/vision.

    4) To support serial communication,Vision Builder AI requires NI-VISA driver version 2.6.0 or higher. You can useserial ports built into your PC or the following NI serial interfaces: PCI232/x, PXI 8420/x, or PXI 8422/x.


    Migration to LabVIEW

    Vision Builder AI 2.0 can createLabVIEW VIs that implement the steps of your inspection diagram. This featurerequires LabVIEW 7.0 or higher and IMAQ Vision 7.0 or higher. If yourinspection diagram contains a Read Text step, you must have NI OCR 1.0installed to migrate the Read Text step to LabVIEW.
    InstallationConsiderations

    If you are using Vision Builder AI 2.0with the NI 1450 Series Compact Vision System, you must install version 1.5 ofthe NI-IMAQ for IEEE 1394 Cameras driver software. Also, when you install thisdriver software, you must select the NI 1450 Series Support feature availableon the Features dialog of the installer.

    Known Issues

    ·        Enabling EnableInspection Selection and specifying an Inspection to run on for aparticular Product Select Value overrides the Inspection youselected in the Startup tab. The NI Compact Vision System launches the Inspectionyou select for the first Product Select Value in the InspectionSelection tab rather than the Inspection you selected in the Startuptab. Refer to the Setting Remote Target Options topic in NI VisionBuilder AI Configuration Help for more information about these settings.

    ·        If you are using VisionBuilder AI with an NI Compact Vision System, you must install NI-VISA 3.0.1 orlater. Visit ni.com/visa for information about downloading and installing NI-VISA.Refer to the NI-VISA readme file for information regarding the changes andenhancements included in NI-VISA 3.0.1.

    回复

    使用道具 举报

    您需要登录后才可以回帖 登录 | 注册会员

    本版积分规则

    LabVIEW HALCON图像处理入门教程(第二版)
    石鑫华机器视觉与LabVIEW Vision图像处理PDF+视频教程11种全套
    《LabVIEW Vision函数实例详解》教程-NI Vision所有函数使用方法介绍,基于NI VISION2020,兼容VDM21/22/23
    LabVIEW图像处理教程
    机器视觉商城淘宝店铺
    视觉论坛充值赞助方法

    QQ|石鑫华视觉论坛 |网站地图

    GMT+8, 2024-3-29 16:27

    Powered by Discuz! X3.4

    © 2001-2024 Discuz! Team.

    快速回复 返回顶部 返回列表