NI LabVIEW 2012SP1 Win64ENG 64位LV2012SP1英文版下载

石鑫华视觉

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

NI LabVIEW 2012SP1 Win64ENG 64位LV2012SP1英文版下载

百度云盘下载：
链接: 请注册视觉论坛会员登录后购买附件下载查看
提取码: 请购买附件下载查看

NI官方下载地址（可能无效或无法下载完成）：
请购买附件下载查看
LV2012SP1ENG64.txt (333 Bytes, 下载次数: 41, 售价: 10 元)

2020-2-14 23:51 上传

点击文件名下载附件
LV2012SP1ENG64

LabVIEW 2012 Service Pack 1 Readme for Windows

Version 12.0.1

December 2012

This file contains important information about LabVIEW 2012 Service Pack 1 (SP1) for Windows, including system requirements, installation instructions, a partial list of bugs fixed for LabVIEW 2012 SP1, and known issues for LabVIEW.

Refer to the National Instruments website for the latest information about LabVIEW 2012 SP1.

Refer to the labview\readme directory for readme files about LabVIEW add-ons, such as modules and toolkits.

System Requirements
Installation Instructions
How to Use NI Software with Microsoft Windows 8
Known Issues
LabVIEW 2012 SP1 (64-bit)
Additions to the LabVIEW Help
Bug Fixes
Automating the Installation of NI Products
Important Information

---

System Requirements

Windows	Run-Time Engine	Development Environment
Processor	Pentium III/Celeron 866 MHz or equivalent	Pentium 4M or equivalent
RAM	256 MB	1 GB
Screen Resolution	1024 x 768 Pixels	1024 x 768 Pixels
Operating System	Windows 8/7/Vista (32-bit and 64-bit) Windows XP SP3 (32-bit) Windows Server 2003 R2 (32-bit) Windows Server 2008 R2 (64-bit)	Windows 8/7/Vista (32-bit and 64-bit) Windows XP SP3 (32-bit) Windows Server 2003 R2 (32-bit) Windows Server 2008 R2 (64-bit)
Disk Space	353 MB	3.67 GB (includes default drivers from the NI Device Drivers DVD)
Color Palette	N/A	LabVIEW and the LabVIEW Help contain 16-bit color graphics. LabVIEW requires a minimum color palette setting of 16-bit color.
Temporary Files Directory	N/A	LabVIEW uses a directory for storing temporary files. National Instruments recommends that you have several megabytes of disk space available for this temporary directory.
Adobe Reader	N/A	You must have Adobe Reader installed to search PDF versions of all LabVIEW manuals.
Note  The following list describes restrictions for using LabVIEW on Windows: LabVIEW does not support Windows 2000/NT/Me/98/95 or Windows XP x64. You cannot access LabVIEW using a Guest account on Windows.

Note  The previous table provides the most current system requirements. The LabVIEW Installation Guide does not provide updated system requirements for LabVIEW 2012 SP1.

Installation Instructions

Depending on whether you are installing LabVIEW for the first time or upgrading from a previous version, refer to one of the following documents for information about installing LabVIEW:

• LabVIEW Installation Guide—Includes information about installing LabVIEW, modules and toolkits, drivers, and hardware.
• LabVIEW Upgrade Notes—Includes information about protecting existing VIs and projects before you install a new version of LabVIEW, as well as upgrade and compatibility issues and a complete list of new features in LabVIEW 2012 and LabVIEW 2012 SP1.
  

You can access the LabVIEW Installation Guide and the LabVIEW Upgrade Notes at ni.com as well as on the installation media.

Note  If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.

How to Use NI Software with Microsoft Windows 8

When you install National Instruments software on Microsoft Windows 8, you will notice a few additional tiles on the Start screen, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (MAX), and the new NI Launcher.

Using NI Launcher

NI Launcher helps you find and launch installed NI products. It provides you with a method of finding NI products similar to the Start menu in previous versions of Microsoft Windows. To use NI Launcher, click the NI Launcher tile on the Start screen. NI Launcher launches the desktop and opens a menu containing a list of NI products. Click any NI product to launch it.

Note  Unlike previous versions of Microsoft Windows, MAX does not appear as a desktop shortcut. You can launch MAX either from the Start screen or from within NI Launcher.

Pinning Frequently Used Applications

For convenience, you can pin your most-used NI applications, such as MAX, to either the Start screen or the Taskbar on the desktop, as necessary:

Current Application	Icon Location	Pin to Action
Windows 8 Desktop	Desktop Taskbar	Right-click application and select Pin to Taskbar
Windows 8 Desktop	Start screen	Right-click application and select Pin to Start
Windows 8 Start screen	Desktop Taskbar	Right-click application and select Pin to taskbar from the menu bar on the bottom of the screen

Finding All Programs

If you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files by right-clicking anywhere on the Start screen and selecting All apps. A list of all installed software and related files appears, in alphabetical order by creator or type.

For more information about NI support for Windows 8, visit ni.com/windows8.

Known Issues

You can access the software and documentation known issues list online. Refer to the National Instruments website for an up-to-date list of known issues in LabVIEW 2012 and LabVIEW 2012 SP1.

LabVIEW 2012 SP1 (64-bit)

When run on Windows (64-bit), LabVIEW 2012 SP1 (64-bit) provides access to more memory than a 32-bit operating system or a 32-bit application can provide. LabVIEW 2012 SP1 (64-bit) includes nearly all of the development environment features of LabVIEW 2012 SP1 (32-bit).

Refer to the National Instruments website for information about obtaining a copy of LabVIEW 2012 SP1 (64-bit).

Supported Hardware

LabVIEW 2012 SP1 (64-bit) supports many hardware devices. Refer to the National Instruments website for information about drivers compatible with LabVIEW 2012 SP1 (64-bit). For GPIB devices, you must use at least NI-488.2 2.6 for Windows. Refer to the specific hardware documentation for more information about compatibility with LabVIEW 2012 SP1 (64-bit).

Supported Modules

LabVIEW 2012 SP1 (64-bit) supports only the NI Vision Development Module. Refer to the Vision Development Module documentation for more information. No additional modules support LabVIEW 2012 SP1 (64-bit).

Additions to the LabVIEW Help

The following list contains additional changes to LabVIEW that are not included in the LabVIEW Help, the LabVIEW Upgrade Notes, or both:

• Because LabVIEW 2012 SP1 may apply different compiler optimizations on different machines, you may need to perform additional steps to guarantee that a built application contains the same binary contents when built on different machines. Refer to the National Instruments website for more information about reproducing builds in LabVIEW 2012 SP1.
  

Bug Fixes

The following items are the IDs and titles of a subset of issues fixed in LabVIEW 2012 SP1. This is not an exhaustive list of issues fixed in the current version of LabVIEW. If you have a CAR ID, you can search this list to validate the issue has been fixed.

ID	Fixed Issue
375494	Improved update rate of front panel control value references
373305	Property: Mouse for 2D Picture controls returns incorrect values after using Invoke Method: Reinitialize to Default on the 2D Picture control
373150	Error code 3 when running LabVIEW 64-bit applications using NI_AALBase.lvlib, that were installed with installers built in 64-bit LabVIEW Application Builder
371714	Slow load time when adding a VI to the Exported VIs List for a DLL
371651	LabVIEW Source Control prompts to add vi.lib or instr.lib to source control even if they are to be excluded
370957	Specific type of cluster sent over the network may produce incorrect results
370578	LabVIEW User Interface responsiveness decreases on Mac OS when many VIs are loaded into memory
370259	Custom Waveform Graphs display NaN values incorrectly
368875	Slow load and close time for large Application Build specifications
368466	Plot visibility check box cannot be toggled for plot 0 on an XY Graph
368396	Certain applications built with Application Builder fail to launch
368000	Using Property: Owner to get an owning cluster's reference on the cluster's sub-controls returns incorrect value if the sub-control reference came from Property: Controls[] of the owning cluster
367463	References returned by Property: Controls[] of a pane containing type definitions are incorrect
367428	Private inlined VIs in a library cannot be built into packed project libraries
366331	Dynamic event registration of an array of controls fails with Error 1
365679	LabVIEW 3D Picture control does not work with certain AMD video card drivers
364799	Selecting the Configure Web Application Server button immediately after preference page load results in 404 error
364462	Crash when changing value of typedef constant
363945	LabVIEW crashes if changing properties for multiple selected nodes by right-clicking the label
362925	Crash when dragging instance of Polymorphic VI from dialog to block diagram
362576	Invoke Method: Add File crashes LabVIEW if Path parameter contains too many characters
362366	Packed Project Library deployment fails on Real-Time targets
362018	Crash when loading some VIs, saved in a previous version of LabVIEW, into LabVIEW 2012
361857	Certain network configurations cause slow loading of NationalInstruments.LabVIEW120.dll
361839	Boolean constant & string constants grow to length of label when cluster is type defined
361666	Tools»Actor Framework Message Maker... is missing in Linux
357092	Cannot use right-click shortcut menu to create items for the reference out terminal of Property Node (XML) or Invoke Node (XML)
323332	Control reference returned from CtlRef of an Event Structure is incorrect for Type Definitions
312538	Link between .NET Constructor Node and Assembly is sometimes lost even when .NET Assembly exists
237213	Event registration refnum of typedef does not update when typedef updates
212136	"The VI is not executable. The full development version of LabVIEW is required to fix the errors" dialog on a built app
184689	LabVIEW UI is less responsive when displaying NaN values on 3D Surface Graph

Recompiling VIs for Bug Fixes

The following fixes require you to manually recompile VIs to correct the problem:

• 366331—Dynamic event registration of an array of controls fails with Error 1
  

To force a recompile of a VI without recompiling its subVIs, press the key while you click the Run button. To force a recompile of all VIs in memory, press the keys while you click the Run button. To force a recompile of the entire current VI hierarchy, close all VIs currently opened, open the top-level VI, and press the keys while you click the Run button. This method does not recompile any of the VIs called dynamically in the hierarchy.

You also can recompile VIs in a specified directory using the following steps.

• Open LabVIEW.
• Select Tools»Advanced»Mass Compile to display the Mass Compile dialog box.
• Navigate to the desired directory and click the Current Folder button.
• Click the Mass Compile button to recompile all VIs in that directory with updates.
• Click the Done button to return to LabVIEW.
  

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.

If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.

For more information, refer to the following KnowledgeBase articles:

• For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
• For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
• To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
  

---

Important Information

Copyright

© 2004–2012 National Instruments. All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

End-User License Agreements and Third-Party Legal Notices

You can find end-user license agreements (EULAs) and third-party legal notices in the following locations:

• Notices are located in the directories.
• EULAs are located in the \Shared\MDF\Legal\license directory.
• Review \_Legal Information.txt for information on including legal information in installers built with NI products.
  

Trademarks

LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments Corporation. Refer to the Trademark Information at ni.com/trademarks for other National Instruments trademarks.

Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.