NI RFIC Test Software 22.5.0 x64Win10 64bitEng NI-RFIC测试软件22.5.0

石鑫华视觉

NI RFIC Test Software 22.5.0 x64Win10 64bitEng NI-RFIC测试软件22.5.0

RFIC测试软件
RFIC测试软件简化了宽带RF IC的特性分析。
RFIC测试软件是一款应用软件，可帮助您分析功率放大器(PA)和前端模块(FEM)等RFIC的特性。如果要对PA进行线性化，有多种针对特定应用的数字预失真(DPD)算法可供选择，例如查找表(LUT)、记忆多项式(MP)和广义记忆多项式(GMP)。此外，您还可以集成并运行NI联盟伙伴的线性化算法或技术。当使用像PXI矢量信号收发仪这样的NI仪器时，您还可以使用该软件来分析包络跟踪(ET)等功率效率优化技术。您可以使用GUI来保存手动配置和执行，以便重复使用这些配置和执行或与其他测试平台共享。National Instruments Alliance Partner（NI联盟伙伴）是独立于NI的商业实体，与NI之间不存在代理、合伙或合资关系。

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

NI RFIC Test Software 22.5.0
发布日期：2023/3/3
包含的版本：22.5.0完整版
受支持的操作系统：Windows 10 64-bit
应用程序位数：64位
语言：英文
校验和：
文件大小: 718815232 字节 (685.52 MB)
修改日期: 2023-03-02 09:49
MD5: afebd745740cca9d7aeeb1be8b0cd1c7
SHA1: ff0dc40d24ae3ad8568b25b7d4768ea8908424d1
SHA256: 0a9e11b2c4c4d74d444ce3ee72e1c99cbc6608a81d854212dd5cd5517082065f
CRC32: 401031f7

百度网盘与NI官方下载地址：
请注册登录机器视觉论坛账号，购买附件查看下载地址
RFICts22.5.txt (588 Bytes, 下载次数: 0, 售价: 10 元)

2023-3-27 12:22 上传

点击文件名下载附件

RFIC Test Software 22.5 Readme

March 2023

This file contains installation instructions and compatibility information for RFIC Test Software 22.5.

You can find more release information on ni.com.

• RFIC Test Software Release Notes: Known issues, bugs fixed since the last release, and other notes about this release
• RFIC Test Software Documentation: New features, behavior changes, and other documentation
  

---

System Requirements

Supported Operating Systems

Application Software Support

Driver and Add-On Requirements

Installation Instructions

Product Security and Critical Updates

New Features

Supported Hardware

Accessing the APIs

Accessing the Documentation

Finding Examples

Automating the Installation of NI Products

Using NI Software with Microsoft Windows 10

Unsupported Windows Operating Systems

---

System Requirements

RFIC Test Software 22.5 has the following minimum requirements:

• Processor—Intel Pentium 4 or equivalent
• 1 GB RAM*
• A screen resolution of 1,024 x 768 with 256 colors
  

NI recommends the following requirements:

• Processor—Intel i5 or equivalent
• 4 GB RAM*
• A screen resolution of 1,600 x 1,200
  

* Depending on the amount of data acquired and/or processed a larger amount of memory may be required.

Note  Guest accounts are not supported under any OS.

Supported Operating Systems

RFIC Test Software 22.5 supports Windows 10 (64-bit).

Note Refer to Unsupported Windows Operating Systems for more information about support for Microsoft Windows OSes.

Application Software Support

RFIC Test Software 22.5 supports the following application software versions, including service packs. If you are not using NI application software, refer to Microsoft Visual Studio Support.

Note  Install application software, such as LabVIEW or Microsoft Visual Studio, before installing RFIC Test Software. To add support for application software installed after installing RFIC Test Software, modify your RFIC Test Software installation or launch the RFIC Test Software installer again.

Application Software	Versions Supported by RFIC Test Software 22.5
LabVIEW (64-bit)	2020 SP1, 2021 SP1 f1 patch, 2022 Q3, and 2023 Q1
Microsoft Visual Studio	2017(minimum)
TestStand	2021

Note  RFIC Test Software cannot operate correctly without the service packs previously mentioned.

Microsoft Visual Studio Support

If you are using the RFIC Test Software .NET Class Library, .NET Framework 4.6.2 (minimum) is required. The RFIC Test Software 22.5 .NET Class Library can be used with Visual C# or Visual Basic .NET in any Visual Studio version that can target .NET Framework 4.6.2.

To use the .NET API, you must install the .NET class libraries or the .NET wrapper in addition to the NI device driver. For information about versions of the .NET Framework and the drivers each supports, as well as the download location of the installer files, refer to .NET Resources for NI Hardware and Software.

Driver and Add-On Requirements

RFIC Test Software requires the following driver and add-on versions:

• NI-RFSG 2023 Q1
• NI-RFSA 2023 Q1
• NI-FGEN 2023 Q1
• NI-DCPower 2023 Q1
• NI-SCOPE 2023 Q1
• RFmx SpecAn 2023 Q1
• RFmx Analog Modulation 2023 Q1
• RFmx LTE 2023 Q11
• RFmx NR 2023 Q11
• RFmx WLAN 2023 Q11
• NI-RFSG Playback Library 2023 Q1
• (Optional) NI-SWITCH 2023 Q12
• (Optional) NI-Digital Pattern Driver 21.83
• (Optional) Semiconductor Device Control Add-On 2022 Q3 Base for InstrumentStudio3
• (Optional) Single-Band RF Power Amplifier Linearizer 1.7 or later⁴
• (Optional) Dual-Band RF Power Amplifier Linearizer 2.1 or later⁴
• (Optional) NI-DMM 2023 Q1⁵
• (Optional) NI-568x Driver Software 20.0⁶
  

1 Installation and licensing are only required for standard-specific measurements.

2 Required to use the PXI-2599 RF Relay Module to connect the PXIe-5830/5831 and the PXIe-5840/5841 Vector Signal Transceivers.

3 Required to control DUTs that use the MIPI® RF front-end (RFFE) or SPI hardware protocol.

⁴ Requires a valid license.

⁵ Required to measure system power-added efficiency (PAE) with PXIe-4080/4081 Digital Multimeters.

⁶ Required to measure RF power level with USB-5681/5683/5684 RF Power Sensor Devices.

Note  The run-time versions of these products are sufficient to run the RFIC Test SFP.

Refer to the readme of each driver and add-on for more information about system requirements, installation instructions, and activation.

Installation Instructions

Download the RFIC Test Software installer from ni.com/downloads. NI software includes NI Package Manager to handle the installation. Refer to the NI Package Manager Documentation for more information about installing, removing, and upgrading NI software using Package Manager.

After installing your software, you will need to activate it. Activating your software verifies the licenses associated with your NI account, so you can start using your software. You have different options for activation, based on your software and how it was purchased. Visit ni.com/activate for more information on activation methods.

If Windows Update is enabled, the installation process might hang if Windows Update interferes with the installation of Microsoft Visual C++ 2015 Run-Time. Visit ni.com/r/exjq43 for more information and steps to resolve this issue.

Activation Notice

The following table lists the measurements and features included in the RFIC Test Software Base and Professional versions. You must have a valid license to activate RFIC Test Software Professional. For more information about activation, refer to NI Software Activation.

Measurement and Feature	RFIC Test Software Base	RFIC Test Software Professional
General measurements	✓	✓
Software-based power servo	Excludes power meter-based servo	✓
Hardware-accelerated power servo	—	✓
Transmission power (TXP)	✓	✓
Adjacent channel power (ACP)	✓	✓
Modulation accuracy (ModAcc - including EVM)	✓	✓
Spectral emission mask (SEM)	✓	✓
AM-to-AM (AMAM) and AM-to-PM (AMPM)	✓	✓
Digital predistortion (DPD)	✓	✓
Load pull	Single point only, excludes sweeping	✓
PAE	—	✓
Dynamic EVM (DEVM)	—	✓
Envelope tracking (ET)	—	✓
Crest factor reduction (pre-DPD and post-DPD)	✓	✓
Swept measurements (power, frequency, and load pull)	Power sweeping only	✓
Complementary cumulative distribution function (CCDF)	✓	✓
Routing triggers	—	✓
Cross-correlation EVM optimization	—	✓

Product Security and Critical Updates

Visit ni.com/security to view and subscribe to receive security notifications about NI products. For information about critical updates from NI, refer to Available Critical and Security Updates for NI Software.

New Features

RFIC Test Software 22.5 supports the following new features:

• Support for RMM-5585
• Support for saving and loading MP and GMP DPD coefficients
• Support for RFmx WLAN OFDMModAcc Channel Estimation Interpolation Type
• Support for using the signal generator (SG) waveform as the Modulation Accuracy (ModAcc) reference waveform for WLAN OFDM EVM calculation
• Support for Cross-Correlation EVM for WLAN and NR on PXIe-5842
• Adoption of Noise Reconstitution IP to WLAN and NR Cross-Correlation EVM measurements
  

Supported Hardware

The following table details the hardware models supported in RFIC Test Software 22.5.

Hardware Product	Hardware Model
Vector Signal Transceiver	PXIe-5820
	PXIe-5830
	PXIe-5831
	PXIe-5840
	PXIe-5841
	PXIe-5842
Waveform Generator	PXIe-5451
Oscilloscope	PXIe-5162
Source Measure Unit	PXIe-4145
RF Power Sensor Device	USB-5681
	USB-5683
	USB-5684
	R&S® NRP50S
RF Relay Module	PXI-2599
Digital Pattern Instrument	PXIe-6571
Digital Multimeter	PXIe-4080
	PXIe-4081
Remote Measurement Module	RMM-5585
mmWave Radio Head	mmRH-5582

Visit NI Hardware and Operating System Compatibility to view driver, desktop operating system, and real-time operating system support for individual hardware devices.

To view information for your device:

• Select your hardware model in the dropdown list on the page to view compatibility information for your device.
• Type your hardware model number in the dropdown list on the web page to filter the list of available devices.
  

Note Some compatibility information may only be available in the archive attached to the NI Hardware and Operating System Compatibility page. For historic driver and OS support information, refer to the readme for the relevant driver version.

Accessing the APIsLabVIEW

ETSync VIs are available in LabVIEW from the Functions»Addons»ET palette.

Power Servo VIs are available in LabVIEW from the Functions»User Libraries»NI Power Servoing IP palette.

NanoSemi Linearizer VIs and NanoSemi Dual Band VIs are available in LabVIEW from the Functions»User Libraries»NanoSemi Linearizer and NanoSemi Dual Band palettes, respectively.

.NET Framework

You can use the ETSync .NET Class library by adding a reference to niETSync.cs, niETUtil.cs, and niFGEN.cs from C:\Users\Public\Public Documents\National Instruments\NI-ETSync\DotNET Wrappers\CS\ and any dependent class libraries from within the Solution Explorer in Visual Studio.

You can use the Power Servo .NET Class library by adding a reference to niVSTPowerServo.cs, niRFSA.cs, and niInteropCommon.cs from C:\Users\Public\Public Documents\National Instruments\FPGA Power Servo\DotNET Wrappers\CS\ and any dependent class libraries from within the Solution Explorer in Visual Studio.

C

You can use the ETSync C dynamically linked library by adding a reference to: Program Files\IVI Foundation\IVI\Bin\niETSync_64.dll.

You can use the Power Servo C dynamically linked library by adding a reference to: Program Files\IVI Foundation\IVI\Bin\niVSTPowerServo_64.dll.

RFIC Test SFP

To launch the RFIC Test SFP, select Start»National Instruments»RFIC Test Soft Front Panel.

Accessing the Documentation

Refer to the RFIC Test Software User Manual (rfichelp.chm), located at Start»National Instruments»RFIC Documentation.

For information about your device, such as getting started, technical specifications, and calibration instructions, refer to the documentation for your device. For the most recent revisions of documentation and newly released documentation, visit ni.com/docs.

Finding Examples

LabVIEW, .NET, and TestStand examples are available through the RFIC Test Automation Wizard, accessible from Start»National Instruments»RFIC Test Automation Wizard.

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.

If the NI product you are installing uses Microsoft .NET 4.6.2, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6.2 separately before you install NI software.

For more information about automating the installation of NI products, refer to Automating an Installer in the NI Package Manager documentation.

Using NI Software with Microsoft Windows 10

For more information about NI support for Windows 10, refer to NI Product Compatibility for Microsoft Windows 10.

Unsupported Windows Operating Systems

RFIC Test Software no longer supports Windows Vista/XP/7/8.x, Windows Server 2003/2008/2012, or any 32-bit Windows operating system. Versions of this product that ship after May 1, 2021, may not install or execute correctly on these operating systems. For detailed information about NI operating system support, visit https://www.ni.com/r/win32bitsupport.