NI OPC Servers 2010 Win32/64Eng NI OPC服务器2010

石鑫华视觉

NI OPC Servers 2010 Win32/64Eng NI OPC服务器2010

OPC Servers
OPC服务器提供单一、一致的接口，可通过OPC标准与多个设备通信。
OPC服务器是LabVIEW的一款附加软件，可将专用工业协议转换为开放式OPC Classic和OPC统一架构(UA)协议。通过该转换，LabVIEW应用程序就可以通过LabVIEW OPC UA工具包附带的OPC UA客户端，与许多不同的可编程逻辑控制器(PLC)和第三方设备进行通信，因而用户只需在一个平台上即可对工业系统进行高性能测量和控制。

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

NI OPC Servers 2010
发布日期：2010/6/20
包含的版本：2010完整版
受支持的操作系统
Windows Server 2008 (32-bit and 64-bit)
Windows Vista Business/Ultimate (32-bit and 64-bit)
Windows Server 2003
Windows XP
Windows 2000 Server
Windows 2000 Service Pack 2 or higher
Windows NT 4.0 Service Pack 6
语言：English
应用程序位数：32/64位
校验和：
文件大小: 79194720 字节 (75.53 MB)
修改日期: 2022-03-25 06:09
MD5: e5cde4269b3b111192fbbbfc8dfa4086（重复一致）
SHA1: 657442a49c5082e66d8b5fc299fdf61553d296c7
SHA256: 514b773765e3d91de56a814c585cbf2522e386601b4e0418b90f2cbb1f7ea6df
CRC32: f5fb4930

百度网盘和NI官方下载地址：
请注册登录视觉论坛账号，购买附件查看下载地址
OPC Server2010.txt (506 Bytes, 下载次数: 0, 售价: 10 元)

2022-12-1 10:30 上传

点击文件名下载附件

National Instruments OPC Servers 2010 Readme

Version 10.0.0

June 2010

This file contains important information about the National Instruments OPC Servers, including installing and activating NI OPC Servers.

Overview

System Requirements

Installation Instructions

Licensing and Activation

Accessing the Help

---

Overview

NI OPC Servers provides a single consistent interface to communicate with multiple devices, saving you from learning new communication protocols and spending time understanding new applications. The combination of NI OPC Servers and other NI products, such as LabVIEW, the LabVIEW Datalogging and Supervisory Control (DSC) Module, Lookout, Measurement Studio, and LabWindows™/CVI™, provides a single platform for delivering high-performance measurements and control to new and existing industrial systems.

You can use NI OPC Servers with the following software applications:

• LabVIEW 8.6 or later, Full or Professional Development System
• LabVIEW DSC Module 8.5 or later
• Lookout 6.2 or later
• Measurement Studio 8.6 or later
• LabWindows/CVI 9.0
  

By default, NI OPC Servers is installed with the DSC Module and Lookout. NI OPC Servers connects through the OPC client in the DSC Module to enable you to develop a full-fledged Human Machine Interface (HMI) and Supervisory Control and Data Acquisition (SCADA) system with programmable logic controllers (PLCs), programmable automation controllers (PACs), and smart sensors. You can use NI OPC Servers with Measurement Studio, LabWindows/CVI, and LabVIEW by using DataSocket as an OPC client.

System Requirements

NI OPC Servers has both software and hardware minimum system requirements. This application supports the following Microsoft Windows operating systems:

• Windows Server 2008 (32-bit and 64-bit)
• Windows Vista Business/Ultimate (32-bit and 64-bit)
• Windows Server 2003
• Windows XP
• Windows 2000 Server
• Windows 2000 Service Pack 2 or higher
• Windows NT 4.0 Service Pack 6
  

Note  Because Windows 2003 Server and Windows XP have continuous updates, National Instruments recommends that you run the Windows update feature to get the latest software.

NI OPC Servers requires the following minimum hardware requirements:

• Intel Pentium III 400 MHz or equivalent processor that supports Windows
• 512 MB of RAM
• 40 MB available disk space
• Available serial port or Ethernet card
  

Installation Instructions

Complete the following steps to install NI OPC Servers.

Note  Some virus detection programs interfere with the installer. Disable any automatic virus detection programs before you install. After installation, check your computer for viruses and enable any virus detection programs you disabled.

• Log on as an administrator or as a user with administrator privileges.
• Insert the NI OPC Servers 2010 installation CD and follow the instructions that appear on the screen.
• Activate NI OPC Servers using the NI License Manager.
  

Licensing and Activation

NI OPC Servers installed with Lookout is licensed. NI OPC Servers installed with the DSC Module provides a temporary license for a two-hour evaluation period. You must activate a valid license to continue using NI OPC Servers after the evaluation period expires.

Use the NI License Manager, available by selecting Start»All Programs»National Instruments»NI License Manager, to activate NI products. Refer to the National Instruments License Manager Help, available by selecting Help»Contents in the NI License Manager, for information about activating NI products.

Accessing the Help

Refer to the National Instruments Web site at ni.com/opc or the NI OPC Servers Help, available by selecting Start»All Programs»National Instruments»NI OPC Servers»NI OPC Servers Help, for more information about NI OPC Servers.

---

Important Information

Copyright

© 2010 National Instruments Corporation. All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

Trademarks

CVI, LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments Corporation. Refer to the Trademark Information at ni.com/trademarks for other National Instruments trademarks.

The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries.

Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.