| Multisim ( 139 ) |
| Bug ID | Description |
| 402858 | The hierarchical block names in the RefDes Setup dialog don't correlate with the names in the design toolbox window |
| 406154 | Using the model maker in Component Wizard will override the user specified model name |
| 414345 | Disabling Include components without models filter does not find Ground |
| 382685 | Save component to database doesn't save instance parameters properly |
| 415653 | Duplicated simulation names shown in the post processor |
| 404623 | Cannot copy text from the text boxes to the Description box editor |
| 413808 | Sometimes transient simulation can lead Multisim to become non-responsive |
| 367615 | Adding a bus vertex on selected bus is behaving erratically |
| 406399 | Opening netlist with circular SUBCKTs causes Multisim to crash. |
| 406520 | Simulating a netlist with circular SUBCKTs causes Multisim to crash. |
| 402989 | Changing parameter sweep settings does not mark design as modified. |
| 394555 | Cannot compile multiple obj files using HiTech compiler. |
| 412244 | Transient analysis incorrectly shows a negative power output for a BJT. |
| 399208 | Calling COM API method disconnect() will crash Multisim randomly. |
| 372025 | Quotation marks used in expression causes some output parameters to be left out of analysis. |
| 402798 | Some components have their Refdes and value reversed after flipping an already flipped component. |
| 404505 | Saving a component to database that had ERC markers creates an unusable component. |
| 351431 | Closing ELVIS/LabView instrument's window will not return focus to Multisim window. |
| 409692 | Using the Grapher's Export to Excel will not work when traces are hidden. |
| 400769 | Switching model view from SPICE template to table clears any existing parameters. |
| 382456 | Cannot create packages that link to land patterns having a space or special characters in their name. |
| 373134 | Adding sections to a component and then manually clearing footprint mapping does not display them correctly. |
| 406121 | Variable Inductor components have a Coil Resistance parameter that is not used at all. |
| 372026 | Node names that start with operators are not simulated when used in output expressions. |
| 404674 | Backward annotate certain files may crash Multisim. |
| 404667 | Triangular current source should say current offset and not voltage offset. |
| 404737 | Parameter sweep dialog removes selected circuit parameters and voltage variables when switching tabs. |
| 404137 | Internal simulation error caused by a function that divides by zero. |
| 402783 | Simulating current through a component in the Fourier analysis doesn't work. |
| 392977 | Incorrect values shown for noise contribution from individual contributors. |
| 394560 | When editing the sub-circuit symbol the text locations are unpredictable. |
| 401669 | The pulse width doesn't work in the Phase Angle Controller 6 Pulses component. |
| 400933 | Net changes in the spreadsheet view do not prompt the user to save file before exiting. |
| 374557 | Operator != does not work correctly in SPICE expression. |
| 383256 | Multisim copy and paste graph properties overwrites plot names in legend. |
| 402613 | Cannot edit components in database that have open square bracket "[" in their name. |
| 401579 | Multisection RefDes's become inconsistent across subcircuits after deleting components. |
| 401876 | Pasting the sections of a multi-section component will not always preserve the refdes names correctly. |
| 400228 | Advanced Pin Mapping generates an incorrect mapping when sorted by Symbol pins. |
| 380269 | SPICE Netlist Viewer does not show unicode characters correclty. |
| 399200 | COM API method EnumInputs() returns duplicate names. |
| 399204 | COM API method WaitForNextOutput() returns incorrect or empty string instead of output name. |
| 399115 | Performance degradation caused by oscilloscope intruments. |
| 274958 | Missing Delete Page from context menu on multi-page designs. |
| 373910 | Save As in Symbol Editor window sometimes leads to confusion. |
| 393411 | Deleting time value from PWL sources data tables clears the entire row. |
| 396828 | .NODESET and .IC settings for nets throw netlist errors when net names contain '-', '+', or '@' |
| 389228 | Denormalized corner frequency in the Transfer Function Block does not work as expected |
| 396348 | Device parameters sometimes show internal SPICE syntax in the analysis settings dialog |
| 394837 | In the component wizard, entering the same model name with different data for multi-section components should not be allowed. |
| 367903 | Copying symbol from another component with same pin names updates poorly. |
| 395603 | Multisim does not save Interactive Simulation settings. |
| 264232 | Cannot edit params if the params statement is not present. |
| 275102 | Changing the windows temp environment variables to a non-existing folder will affect multisim negatively. |
| 356061 | Snippet Drag behavior changes between minor Internet Explorer builds. |
| 390898 | The spreadSheet view does not scroll up with shift + up arrow key. |
| 391044 | Keyboard arrows not moving a group of selected parts in any direction. |
| 393290 | Docked window views improvements |
| 274599 | XSpice Laplace device has simulation issues. |
| 273993 | Adding device/model parameter does seem to do anything for submodule parameters. |
| 337145 | Provide a better description of the error message when the PLD device is not detected. |
| 389624 | Saving an older file using a current Multisim version will have incorrect behavior. |
| 390078 | Unchecking a checkbox associated to Clock trigger value for CONTROLLED_ONE_SHOT will lose entered data. |
| 383070 | Locked sub-circuits can be opened if dragged onto the schematic from design toolbox. |
| 380838 | In the spreadsheet view selecting components from multiple pages does not show the option to Replace selected components. |
| 381432 | Word Generator pins 0-15 should be on the right side for improved convenience. |
| 387017 | Multisim may crash when switching from mil to mm in PCB sheet properties. |
| 268850 | Components with swappable pins don't work well with pin highlighting and ELVIS 3D view. |
| 388626 | Noise analysis can sometimes produce "-1.#INDO T" as a result. |
| 383991 | Unable to simulate an expression in a worst case analysis. |
| 272318 | Some analyses results do not have column headers |
| 389344 | The cm_static_integrate routine does not implement the Trapezoidal integration method correctly. |
| 334937 | Support for EDA parts XML files was removed. |
| 389531 | Display duplicate components in the result tab fails for certain components. |
| 389500 | Pressing enter in LabVIEW Co-simulation Terminals window causes entire window to go blank. |
| 376684 | Netlist errors are generated at simulation after pasting digital component and probe. |
| 367411 | Sometimes an expression cannot be deleted in an analysis. |
| 373734 | Incorrect labels in the filter wizard's explanation image. |
| 389069 | Title block properties resets to default values when design border is not visible. |
| 366002 | Checking for common pin in the Advanced RefDes Configuration dialog is not working. |
| 386538 | Spiky response during AC analysis for certain circuits. |
| 265616 | Convergence assistant does not correctly roll back initial conditions simulation settings for certain files. |
| 271623 | DC Sweep analysis performs unnecessary solution cycles. |
| 319412 | User data for Multisim v11 is not being converted. |
| 268203 | Xspice command line interface does not always work properly. |
| 274263 | Placing an on-page connector sometimes generates a net conflict message. |
| 271503 | Pasting an instrument will not always maintain the instrument's settings. |
| 271384 | In the XSPICE Command Line Interface setting the inertial delay does not seem to work. |
| 286275 | Multisim does not follow Pspice compatibility using parenthesis and curly braces. |
| 354632 | Simulator error when TDM source is not provided with a file name. |
| 275078 | The default size for the bill of Materials dialog should be increased. |
| 269328 | COM API should have more descriptive error messages on failure. |
| 363394 | Oscilloscope adding function gives incorrect values when changing V/div settings. |
| 363423 | Exported VHDL does not complile in some cases because of duplicated connectors. |
| 319959 | Results tab displays an incomplete message when a virtual connection is made. |
| 326044 | Certain circuits use large amount of memory that may crash the simulator. |
| 326706 | Adding a description box label does not immediately show in the labels dialog. |
| 351708 | COM API methods for the bill of materials and netlist reports do not obey the variant settings. |
| 274562 | The update components window does not include subcircuit components. |
| 274584 | Copy and paste a component's multisections does not keep the sections on same component. |
| 295957 | Footprint names in the bill of materials for Multisim are different from the bill of materials for Ultiboard. |
| 352988 | Cancelling the action to open multiple component snippets does not work as expected. |
| 358820 | COM API methods DoACSweep and SetOutputRequest should use int/int32 type instead. |
| 383404 | Degree symbol does not show properly in text exports from bill of materials report. |
| 269819 | ELVIS II 3D breadboard have inconsistent pin numbers of the I/O blocks compared to the physical board. |
| 329684 | Virtual transistors sometimes have inconsistent 3D representations |
| 268961 | COM API EnumInputs method shows clock current incorrectly as a voltage source. |
| 346910 | The select button is greyed out when adding a new SPICE model. |
| 352295 | Unable to import user fields data for most components. |
| 352726 | The add a footprint dialog does not populate footprint names correctly. |
| 268614 | COM API needs proper input data validation on all inputs of type variants. |
| 359051 | Multi-selecting components seems to only work when clicking on drawn areas of a component. |
| 371140 | 4-channel oscilloscope incorrectly flips A/B graph. |
| 274229 | CLOCK_VOLTAGE and CLOCK_CURRENT sources are no good past 100MHz |
| 263369 | ELVIS net does not change colour when two of the nodes are on the ELVIS rails. |
| 267416 | MCU wizard does not check for invalid characters in the workspace path until the end of the wizard. |
| 317666 | Buses do not follow grid when rotated. |
| 356710 | 3-phase power sources have incorrect AC analysis phase |
| 359237 | Running MCU assembly source using C compiler causes Multisim to stop simulating other files. |
| 354674 | Cancelling a replace by subcircuit will lead to an orphan subcircuit in the design toolbox. |
| 304367 | SPICE params statements with no parameters following will be treated as subcircuit names. |
| 267840 | MS COM method DoACSweep should not accept 0 as starting frequency. |
| 324659 | Simulation errors are poorly described. |
| 269179 | The models for 12AT7 and 12AX7 are incorrect |
| 273976 | Some counter components do not behave as expected. |
| 321791 | Editing text in schematic does not prompt the design to be saved. |
| 275149 | Interactive simulation seems to get stuck without generating convergence error. |
| 361670 | Breakpoints are completely missed for D/A bridge component. |
| 372141 | Renaming connectors in a subcircuit or hierarchical block adds duplicate pins to the block symbol. |
| 284662 | Multisim simulation fails due to calling a breakpoint in the past. |
| 309665 | SYNC output for the Agilent Function Generator has incorrect rise/fall time. |
| 362333 | Function generator instrument should not be setting TMAX. |
| 365444 | The option to select a RefDes numbering based on a Hierarchical Block instance is not working. |
| 364792 | Replacing a multi-section component will sometimes lose hidden pin's connections. |
| 364797 | No merging warning of hidden pins for multi-section components in different circuits levels |
| 274419 | Disallow creating Family names with space characters. |
| 345454 | Pasting sections of a component into one instance of a subcircuit does not keep section consistency on the second instance of the subcircuit. |
| 275455 | Placing wire using keyboard shortcut during component copy/paste operation crashers Multisim. |
| 351776 | Printing in Black and White removes text. |
| Ultiboard ( 44 ) |
| Bug ID | Description |
| 413655 | Voiding is not being redrawn when resizing holes. |
| 413844 | A Net bridge causes a copper area cut-out that's on a different layer |
| 374621 | Overlapping pads that belong to the same net does not trigger a DRC error. |
| 412733 | Cannot exclude Courtyard layer from keep-in/keep-outs |
| 369042 | Print dialog is missing drill and drill symbols layers in list of available layers. |
| 400219 | Power plane not showing in 3d preview when placed on top copper layer. |
| 392931 | Grid & units settings in PCB properties are not imported properly by Ultiboard v12 and later. |
| 402542 | A via that is about to be placed uses copper grid instead of via grid. |
| 387142 | Importing DXF with too many layers crashes Ultiboard. |
| 400706 | Autofilled value is a nuisance when typing digit zero first into a field. |
| 400710 | Part Wizard in Ultiboard discards changes when back button is pressed. |
| 274323 | Placing a netbridge directly on the nets to connect creates invalid DRC errors. |
| 392957 | Gerber drill exports do not honor "Minimum tool size for slot drilling" design rule. |
| 388793 | Snap to grid is ignored when moving existing traces. |
| 390079 | Unable to set multiple traces to "use net settings". |
| 369041 | Clearances are temporarily enabled upon applying changes to holes. |
| 383057 | Wrong net is highlighted when a SMT pad is selected. |
| 389667 | Drawing a line from a via does not use trace settings in PCB properties. |
| 375198 | Unable to autoroute due to a blind via being enabled on a two layers board. |
| 357790 | Cutting and pasting pins which are placed directly on a board will cause a crash. |
| 387690 | Cancelling Get a part from the Database dialog and then switching tabs can make Ultiboard crash. |
| 364244 | No option to separate drill symbols gerber file export from a multi-layer design. |
| 377973 | Upgrade option in PCB properties causes power planes to connect with pins in other nets. |
| 388335 | Drag and drop file path to 3rd party file type is assumng it is a DXF file. |
| 268564 | Unplacing parts takes too long compared to previous versions. |
| 269043 | Unable to place text on copper layer in the footprint editor. |
| 380186 | Composite merge of silkscreen top and bottom corrupts the gerber export. |
| 269004 | The maximum pin count warning dilaog only appears once. |
| 274453 | Upon disabling the DRC check and undoing a copper trace move, it will disconnect the pad from the net. |
| 348345 | Multi-select custom pads and then change clearances will cause all pads to be identical. |
| 268441 | Follow-me tool ignores keep-in/keep-out causing DRC errors. |
| 268445 | Connection machine ignores keep-in/keep-out causing DRC errors. |
| 356987 | Cannot export drill symbol and drill holes in DXF Format. |
| 273255 | Corner mitering is behaving inconsistently. |
| 282135 | Cannot move objects from PCB layers to information layers. |
| 325170 | 3D view does not refresh when design is updated. |
| 273270 | In 3D view the show/hide height mode cannot be disabled once it was enabled. |
| 383044 | While in In-Place Edit mode, placing a land pattern will lead to a crash. |
| 362250 | 3D View cannot properly display mirrored Windows font text. |
| 382206 | DRC net length check no longer distinguishes nets with no length. |
| 272209 | Pad edit layer shows up as a routing layer. |
| 274406 | Custom pad can incorrectly be pasted on to PCB from pad edit. |
| 351249 | Width and height reversed in Advanced Hole Properties. |
| 358385 | Ultiboard incorrectly connects two nets when using perpendicular-cross shaped thermal relief type. |
| Other ( 2 ) |
| Bug ID | Description |
| 274642 | Unable to copy and paste footprint name from dialog window. |
| 275094 | Closing the application window when a modal dialog is active will lead to crashes. |
发表于 2021-3-13 00:22:56
