石鑫华视觉论坛

 找回密码
 注册会员
查看: 2187|回复: 1

[驱动程序] 菲力尔FLIR-灰点Point Grey工业相机MAC OS苹果系统驱动Spinnaker-2.0.0.109

[复制链接]
  • TA的每日心情
    奋斗
    8 小时前
  • 签到天数: 3386 天

    连续签到: 8 天

    [LV.Master]2000FPS

    发表于 2020-7-22 15:07:04 | 显示全部楼层 |阅读模式 来自:广东省东莞市 电信

    注册登陆后可查看附件和大图,以及购买相关内容

    您需要 登录 才可以下载或查看,没有账号?注册会员

    x
    菲力尔FLIR-灰点Point Grey工业相机MAC OS苹果系统驱动Spinnaker-2.0.0.109

    版本:
    Spinnaker-2.0.0.109
    链接: https://pan.baidu.com/s/1Pu0FFnDKNJPDN4TG0hsjrQ 提取码:
    游客,如果您要查看本帖隐藏内容请回复


    Spinnaker SDK - 1.29.0.5
    - CHANGE LIST (list of updates with this version):
    Enhancements:
    - SpinView_WPF Auto Force IP should log a warning if no cameras are found
    - AcquisitionMultipleCamera Has Been Replaced By AcquisitionMultipleCameraRecovery
    - Update Spinnaker triggering examples to set TriggerSelector to FrameStart
    - Add support link to SpinView_WPF and SpinView_Qt
    - Spinnaker Ubuntu Dependency Installation
    Resolved Issues:
    - Linux installer tries to find Qt libraries in /usr/lib/
    - Issue with multiple device reset on Ubuntu
    - Single device shows two cameras in updater mode
    - SpinView_Qt crashes if the path to inference label is invalid
    - Spinview_QT cannot connect to camera in "Show only connected adapters" mode
    - Spinview_QT does not give feature descriptions when searching for feature
    - SpinView_WPF GUI hangs after executing force IP unless refreshing the device list
    - SpinView_WPF does not reset device tab view after GEV interface force IP
    - SpinView_WPF crashes when snapping image
    - Spinnaker Installer States a Newer Version of Spinnaker is Installed When an Older Version of Spinnaker is Installed
    - Windows USB transfer could be cancelled on active final1 packet during EndAcquisition()
    - Classification confidence shows 200% in SpinView_WPF
    - EndAcquisition() takes long when gdb is used
    - SpinPixelCorrection_WPF Crashes when applying filter
    - Spinnaker CameraPtr::EndAcquisition() hangs for 1.28.0.23
    - Fix Firmware update getting stuck at 97% issue

    Spinnaker SDK - 1.28.0.23

    - CHANGE LIST (list of updates with this version):

    Enhancements:
    - SpinView_Qt - add ability to cascade displays (streaming window) horizontally
    - SpinView_Qt - add a progress indicator to File Access tab
    - SpinView_Qt - Have inference data tied to streaming window rather than image
    - SpinView_Qt - Add Camera FPS counter
    - StatusBarControls should be part of SpinView_WPF instead of GUI XML
    - Add support for device specific JPEG-LS payload type
    - Clang format for C#
    - SpinView_WPF Auto Force IP should log a warning if no cameras are found
    - AcquisitionMultipleCamera Has Been Replaced By AcquisitionMultipleCameraRecovery
    - Update Spinnaker triggering examples to set TriggerSelector to FrameStart
    - Add support link to SpinView_WPF and SpinView_Qt
    Resolved Issues:
    - SpinView_Qt Linux Acquisition Mode Dropdown Menu Is Cut Off
    - Versions of some example exe's are never updated
    - EXC_CRASH when trying to start SpinView and other precompiled examples in MAC OS with Spinnaker v1.24.0.60
    - AdapterConfigGUI forces user to set default gateway on network adapters
    - SpinView 1.26.0.31 camera not visible and auto force IP does nothing
    - SpinView_WPF 1.25 takes longer time to enumerate GigE cameras than 1.20
    - SpinView_Qt crashes (or does not stream again) when stream window is closed while streaming
    - SpinView_Qt Write-to-DDR tooltip has extra spaces
    - SpinView_Qt crashes with segfault when disconnecting an initialized/streaming camera
    - Spinview_Qt 1.27.0.48 segfaults when Ax5 is selected
    - SpinView_Qt category node names are editable
    - SpinView_Qt crashes if the path to inference label is invalid
    - Spinview_QT cannot connect to camera in "Show only connected adapters" mode
    - Spinview_QT does not give feature descriptions when searching for feature
    - SpinView_Qt crashes when streaming from software disconnect and reconnect
    - Searching camera feature in SpinView_Qt does not work with spaces
    - Cannot restart acquisition after DeviceReset on RaspberryPi3
    - Issue with multiple device reset on Ubuntu
    - Single device shows two cameras in updater mode
    - SpinView_WPF GUI hangs after executing force IP unless refreshing the device list
    - FFY-U3: Intel USB active transfer cancel fix.
    - SpinView WPF does not reset device tab view after GEV interface force IP
    - Saving snapshot crashes SpinView_WPF
    - Spinnaker Installer States a Newer Version of Spinnaker is Installed When an Older Version of Spinnaker is Installed
    - Windows USB transfer could be cancelled on active final1 packet during EndAcquisition()


    回复

    使用道具 举报

    您需要登录后才可以回帖 登录 | 注册会员

    本版积分规则

    LabVIEW HALCON图像处理入门教程(24.09)
    石鑫华机器视觉与LabVIEW Vision图像处理PDF+视频教程11种全套
    《LabVIEW Vision函数实例详解2020-2024》教程-NI Vision所有函数使用方法介绍,基于NI VISION2020,兼容VDM21/22/23/24

    QQ|石鑫华视觉论坛 |网站地图

    GMT+8, 2024-11-24 18:25

    Powered by Discuz! X3.4

    © 2001-2024 Discuz! Team.

    快速回复 返回顶部 返回列表