NI mmWave OTA Validation Test Software 22.0 x64Win10 64bitEng NI毫米波空口验证测试软件22.0
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
NI mmWave OTA Validation Test Software 22.0 x64Win10 64bitEng NI毫米波空口验证测试软件22.0
mmWave OTA验证测试软件
mmWave OTA验证测试软件可简化并加速5G封装天线波束成形器件的特性分析和验证测试。
mmWave OTA验证测试软件是一款应用软件，可帮助您配置、运行、可视化和报告5G mmWave封装天线集成电路(IC)空口(OTA)辐射性能。该软件可以执行系统校准，以测量每个信号路径的路径损耗，进而补偿测试仪器、电缆、天线和空口通信。此外，mmWave OTA验证测试软件还根据3GPP测试规范简化了配置和运行3D空间扫描的过程。您可以使用模板自定义测试序列，以自动执行数据采集、结果报告和存储。该软件包括一系列可视化工具，包括天线方向图、3D和极坐标图、波束宽度、热图等。
发布日期：2022/7/12
包含版本：22.0.0完整版（此版本只支持到LabVIEW2021SP1，并不支持LabVIEW2022Q3，即LV22.3。模块版本也需要22.3或22.5版才支持LV22.3）
受支持的操作系统
Windows 10 64-bit
应用程序位数：64位
语言：英文
校验和：
文件大小: 771059712 字节 (735.34 MB)
修改日期: 2021-09-12 00:00
MD5: 60be61dc21abaa332dc31d96dcd4d2fa
SHA1: 4ade27f21d6bc398c101d309007417aacc92d6d2
SHA256: 461c30ae379303a7896069f3cc6371f485705b9112967d3a7ca7915d01271d68
CRC32: 5f831029
百度网盘和NI官方下载地址：
请注册登录视觉论坛账号，购买附件查看下载地址
mmWave OTA Validation Test Software 22.0 ReadmeJune 2022This file contains installation instructions and compatibility information for mmWave OTA Validation Test Software 22.0.You can find more release information on ni.com.
[*]mmWave OTA Validation Test Software Release Notes: Known issues, bugs fixed since the last release, and other notes about this release
OverviewRequired SoftwareSupported Operating SystemsInstallation InstructionsProduct Security and Critical UpdatesSupported HardwareAccessing the DocumentationFinding Installed SoftwareAutomating the Installation of NI ProductsUsing NI Software with Microsoft Windows 10Legal InformationOverviewThe mmWave OTA Validation Test Software installation provides support for the mmWave OTA Validation Test Reference Architecture and helps you configure, run, visualize, and report the over-the-air (OTA) radiated performance of 5G mmWave antenna-in-package (AiP) integrated circuits.mmWave OTA Validation Test Software can perform system calibration to measure the path losses of every signal path, compensating for test instruments, cables, antennas, and air interface. Additionally, mmWave OTA Validation Test Software simplifies the process of configuring and running 3D spatial sweeps according to 3GPP test specifications. You can use templates to customize test sequences to automate data collection, results reporting, and storage. The software also includes a collection of visualization tools for antenna pattern cuts, 3D and polar plots, beamwidth, heat map, and more.Required SoftwaremmWave OTA Validation Test Software 22.0 requires the following software versions.
SoftwareRequired for LabVIEW SupportRequired for TestStand SupportRequired for C# .NET SupportRequired for MATLAB SupportRequired for Python Support
LabVIEW 2021 SP1 (64-bit)√√———
LabVIEW 2021 SP1 Runtime Engine (64-bit)——√√√
TestStand 2021 (64-bit)—√———
Microsoft Visual Studio†2017——√——
MATLAB† 2020b———√—
Python† 3.8————√
RFmx NR 21.5√√√√√
RFmx SpecAn 21.5√√√√√
NI-DAQmx 21.3√√√√√
NI-RFSA 21.5√√√√√
NI-RFSG 21.5√√√√√
NI-RFSG Playback Library 21.5√√√√√
†If you are using the mmWave OTA Validation Test C# .NET API, MATLAB examples, or Python examples, .NET Framework 4.6.2 (minimum) is required. To use the .NET API, you must also install .NET support for the required drivers.Refer to the documentation of each software product for specific system requirements.Supported Operating SystemsmmWave OTA Validation Test Software 22.0 supports Windows 10 (64-bit).Installation InstructionsDownload the mmWave OTA Validation Test Software installer from ni.com/downloads. NI software includes NI Package Manager to handle the installation. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using NI Package Manager.NoteUse the serial number that is included with your software to activate mmWave OTA Validation Test Software. For more information on mmWave OTA Validation Test Software activation, refer to Activating a Product.Product Security and Critical UpdatesVisit ni.com/security to view and subscribe to receive security notifications about NI products. For information about critical updates from NI, refer to Available Critical and Security Updates for NI Software.Supported HardwaremmWave OTA Validation Test Software supports the mmWave OTA Validation Anechoic Chamber, the MilliBox™ Chambers and positioners, and all instruments used with the mmWave OTA Validation Test Reference Architecture. Refer to the mmWave OTA Validation Test Reference Architecture Manual for a full list of supported instruments.Accessing the DocumentationThe mmWave OTA Validation Test Reference Architecture Manual is restricted on ni.com. Refer to the installed documentation for how to access the online library for user documentation for using mmWave OTA Validation Test Software. The mmWave OTA Validation Test Reference Architecture documentation is accessible from Start»National Instruments»OTA Documentation.Finding Installed Software
ItemInstalled Location
mmWave OTA TestStand ExamplesUsers\Public\Documents\National Instruments\TestStand 2021 (64-bit)\Examples\OTA Test
mmWave OTA Validation Configurator<Program Files>\National Instruments\OTA Test\Configurator
mmWave OTA Validation Positioner Control Panel<Program Files>\National Instruments\OTA Test\Positioner
mmWave OTA Support for LabVIEW<Program Files>\National Instruments\LabVIEW 2021\user.lib\OTA Test
mmWave OTA Support for .NET, MATLAB, and PythonUsers\Public\Documents\National Instruments\OTA Test\Examples
mmWave OTA Validation Visualizer<Program Files>\National Instruments\OTA Test\Visualizer
mmWave OTA Validation Antenna Alignment Helper<Program Files>\National Instruments\OTA Test\Antenna Alignment
RF System Calibration Assistant<Program Files>\National Instruments\RF System Calibration
Automating the Installation of NI ProductsYou can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.If the NI product you are installing uses Microsoft .NET 4.6.2, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6.2 separately before you install NI software.For more information about automating the installation of NI products, refer to Automating an Installer in the NI Package Manager manual.Using NI Software with Microsoft Windows 10For more information about NI support for Windows 10, refer to NI Product Compatibility for Microsoft Windows 10.Legal InformationCopyright© 2019–2022 National Instruments Corporation. All rights reserved.Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.End-User License Agreements and Third-Party Legal NoticesYou can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
[*]Notices are located in the <National Instruments>\_Legal Information and <National Instruments> directories.
[*]EULAs are located in the <National Instruments>\Shared\MDF\Legal\license directory.
[*]Review <National Instruments>\_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted RightsIf you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.IVI Foundation Copyright NoticeContent from the IVI specifications reproduced with permission from the IVI Foundation.The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.TrademarksRefer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. MilliBox is a trademark of Milliwave Silicon Solutions Inc. Other product and company names mentioned herein are trademarks or trade names of their respective companies.PatentsFor patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.
页:
[1]